Page 1 of 20 1234511 ... LastLast
Results 1 to 10 of 200

Thread: Latest Barry Allen

  1. #1
    Elite Vip passete's Avatar
    Join Date
    May 2011
    Location
    France
    Posts
    484
    Post Thanks / Like
    Rep Power
    9

    Default Latest Barry Allen

    After there were no problems during the tests with the images with the new loaders, I made another kit with BA 5.2.9 releaste for all boxes with loaders> = 82nd

    Please note that images for his BA 5.2.9 800/800se/500hd but ONLY in NFI2 more secure format, making these faces are flashable images only if 84 is a loader is in flash.

    by gutemine
    Attached Files Attached Files

  2. Likes red799 liked this post
  3. #2
    Elite Vip passete's Avatar
    Join Date
    May 2011
    Location
    France
    Posts
    484
    Post Thanks / Like
    Rep Power
    9

    Default Re: Last Barry Allen

    And NO, BA 5.2 doesn't work with OE 1.5 Images in Flash, only OE 1.6 images > March 2011 are supported in Flash

    So kann man einen Treiber update in Telnet machen wenn man vom Flash gebootet ist:
    You can do a driver update in telnet when bootet from flash like this:

    ba.sh chroot imagename
    ba.sh get_latest_driver

    Man kann auch ein ganzes Image updaten bevor man es bootet:
    You can upgrade an entire image before booting it:

    ba.sh chroot imagename
    ipkg update && ipkg upgrade

    mdev Unterstützung wurde entfernt - patched/überlistet BA besser nicht um es zurückzubekommen.
    mdev support was removed - better don't patch/fool BA to get it back.
    Attached Files Attached Files

  4. #3
    Elite Vip passete's Avatar
    Join Date
    May 2011
    Location
    France
    Posts
    484
    Post Thanks / Like
    Rep Power
    9

    Default Re: Last Barry Allen

    New barry allen 5.2.11

    Should Work with new 7020HD
    Attached Files Attached Files

  5. #4
    Elite Vip passete's Avatar
    Join Date
    May 2011
    Location
    France
    Posts
    484
    Post Thanks / Like
    Rep Power
    9

    Default Last Barry Allen

    BA 6.0 is ONLY for Images with Loader >= 84 and after October (3.2 Release Image) !!!

    by gutemine
    Attached Files Attached Files

  6. #5
    Elite Vip passete's Avatar
    Join Date
    May 2011
    Location
    France
    Posts
    484
    Post Thanks / Like
    Rep Power
    9

    Default Last Barry Allen

    Here is the changelog for the 6.0.4 version releaste BA.

    The kit is now down to it already ;-)

    * It is now again a releaste kit and the kit does not expire after a short time schobn, but as usual it is now all previous versions of BA no longer supported.

    * This version is compatible ONLY with the more original Loader # 84 of DMM (in 7025 it can therefore only with the ipk for cheating Loder 84, the use here append)

    * This version of BA was cleared out DRASTICALLY - the kit is MUCH smaller and leaner and thus should still all the current things still work.

    * What I have first thrown out, because there is already some time disabelt and no one has asked the shell script is also in other languages, run it, plug the BA and BA Webif of course continue to the full language support.

    * The Multiboot Download Center is finally kicked out after serving his entire OoZooN feed as a web page makes no sense - RIP.

    * Bzip2 was also thrown out because the MB_ *. tar files uncompressed so now be made, so it is not necessary in the ipk kit to lug around, who needs it anyway bzip2 has to feed the software of most images.

    The BA * Get last option kit to look at whether there is a new BA kit is also kicked out, because who is also on the homepage OoZooN as it stands im about.

    * Because we have in the boot logo thread, the problem was to position the Barry Allen logo for a new boot logo correctly I made ALL boot logo out to a black - as in department stores where the mannequins are in Neudekorieren first put into black plastic bags. I've always been all over the logos and fonts in considering your own theme pack outsource kit for BA, or may indeed any appropriate tar.gz or IPKS to / media / ba / logos and / media / ba / fonts make.

    * The boot manager should now ALL on / dev / input / event * respond, we must therefore change anything, no matter which remote control is used (old / new / DMM keyboard). Hence the setting for the plugin is removed because no longer needed - RIP.

    * Changing the color mode (RGB, ...) when bootmenu is kicked out, when connected via HDMI, you need the eh no more and if someone has a problem on the 7025 so you can do that also in the bios change.

    * There is now a Autoswap feature - once you have created on / media / ba BA with a swapfile (minimum size is now 128MB), this in ALL the boot images (including Flash) automatically without beswapped fstab or the like.

    Devices * File system check of the BA is now when you are booted from Flash made when you type in telnet bainit 90, with all numbers> 89, the cause in order to avoid further confusion.

    * DO NOT use it OoZooN (or another image where the loop device driver in the kernel are fixed) image in flash or instralliert not on a 7025 then it MUST be the kernel-module-loop re-install ipk, otherwise BA NOT work!

    * It is now a binary bainit and NO more shell script and it will stay that way!

    LG
    gutemine
    Attached Files Attached Files

  7. #6
    Elite Vip passete's Avatar
    Join Date
    May 2011
    Location
    France
    Posts
    484
    Post Thanks / Like
    Rep Power
    9

    Default Re: Last Barry Allen

    Hi!

    Here is the changelog for the 6.0.5 version releaste BA.

    * It is now again a releaste kit and the kit does not expire after a short time ago, but are so common now as all previous versions of BA no longer supported.

    * This version is compatible ONLY with the more original Loader # 84 of DMM (in 7025 it can therefore only with the ipk for cheating Loder 84, the use here append)

    * This version of BA was cleared out DRASTICALLY - the kit is MUCH smaller and leaner and thus should still all the current things still work.

    * What I have first thrown out, because there is already some time disabelt and no one has asked the shell script is also in other languages, run it, plug the BA and BA Webif of course continue to the full language support.

    * The Multiboot Download Center is finally kicked out after serving his entire OoZooN feed as a web page makes no sense - RIP.

    * Bzip2 was also thrown out because the MB_ *. tar files uncompressed so now be made, so it is not necessary in the ipk kit to lug around, who needs it anyway bzip2 has to feed the software of most images.

    The BA * Get last option kit to look at whether there is a new BA kit is also kicked out, because who is also on the homepage OoZooN as it stands im about.

    * Because we have the new boot logo thread the problem was to position the Barry Allen logo for a new boot logo correctly I made ALL boot logo out to a black - as in department stores where the mannequins are in Neudekorieren first put into black plastic bags. I did anyway all the logos and fonts in considering your own theme pack outsource kit for BA, or may indeed any appropriate tar.gz or IPKS to / media / ba / logos and / media / ba / fonts make.

    * You can now disable boot logo disabeln with the boot manager logos also quite, then the background of the BA Boot menu shown the boot logo from the flash.

    * The boot manager should now ALL on / dev / input / event * respond, we must therefore change anything, no matter which remote control is used (old / new / DMM keyboard). Hence the setting for the plugin is removed because no longer needed - RIP.

    * Changing the color mode (RGB, ...) when bootmenu is kicked out, when connected via HDMI, you need the eh no more and if someone has a problem on the 7025 so you can do that also in the bios change.

    * There is now a Autoswap feature - once you have created on / media / ba BA with a swapfile (minimum size is now 128MB), this in ALL the boot images (including Flash) automatically without beswapped fstab or the like.

    * For all boxes except the 7025 is the enigma2 restart when unpacking / save images of disabelt the installation, so it runs through enigma2 - is exactly why but now when backing also calls for the swapfile.

    * As a 'little help' for the new fixed mounting images without hard disk that I installed when a new BA FIRST image that will boot times when there are no settings inside then the / dev/sda1 (which is usually the hard disk) in the BA image on / media / hdd mount so that during the Settup Wizzard on first boot can restore the settings from there. Once settings are in the image but if this be not done, but if you mount the hard disk of the settings stored in clean, has no problem should be more.

    Devices * File system check of the BA is now when you are booted from Flash made when you type in telnet bainit 90, with all numbers> 89, the cause in order to avoid further confusion.

    * DO NOT use it OoZooN image (or other image where the loop device driver is fixed in kernel) in Flash or instralliert is not based on a 7025 then you MUST re-install the kernel-module-loop ipk in the flash image, otherwise will NOT work BA !

    * It is now a binary bainit and NO more shell script and it will stay that way!
    Attached Files Attached Files

  8. #7
    Elite Vip passete's Avatar
    Join Date
    May 2011
    Location
    France
    Posts
    484
    Post Thanks / Like
    Rep Power
    9

    Default Last Barry Allen

    Barry Allen 6.0.6 Released kit

    English Manual For 6.0.6
    Attached Files Attached Files

  9. #8
    Elite Vip passete's Avatar
    Join Date
    May 2011
    Location
    France
    Posts
    484
    Post Thanks / Like
    Rep Power
    9

    Default Last Barry Allen

    Here is the changelog for the 6.0.7 version of Barry Allen.

    * This is another version releaste in almost all bugs should be now fixed in 6.0.4-6, which all previous versions are no longer supported.

    * This version is compatible ONLY with the original loader # 84 of DMM (in 7025 it can therefore only with the ipk for cheating Loder 84, the use here append)

    * Because we are working in the new boot logo BA thread still on, I made out to ALL boot logos on a black - as in department stores where the mannequins are also used when decorating for the first time put into black plastic bags.

    * The boot manager should now ALL on / dev / input / event * respond, we must therefore change anything, no matter which remote control is used (old / new / DMM keyboard). Hence the setting for the plugin is removed because no longer needed - RIP.

    * There is now a Autoswap feature - once you have created on / media / ba BA with a swapfile (minimum size is now 128MB), this in ALL the boot images (including Flash) automatically without beswapped fstab or the like.

    * For all boxes except the 7025 is the enigma2 restart when unpacking / save images of disabelt the installation, so it runs through enigma2 - is exactly why but now when backing also calls for the swapfile.

    * As a 'little help' for the new fixed mounting images without hard disk that I installed when a new BA FIRST image that will boot times when there are no settings inside then the / dev/sda1 (which is usually the hard disk) in the BA image on / media / hdd mount so that during the Settup wizard on first boot can restore the settings from there. Once settings are in the image but if this be not done, but if you mount the hard disk of the settings stored in clean, has no problem should be more.

    Devices * File system check of the BA is now when you are booted from Flash made when you type in telnet bainit 90, with all numbers> 89, the same effect as to avoid further confusion.

    * DO NOT use it OoZooN image (or other image where the loop device driver is fixed in kernel) in Flash or is not installed it on a 7025 then you MUST re-install the kernel-module-loop ipk in the flash image, otherwise Barry Allen is NOT ! work!

    * It is now a binary bainit and NO more shell script and it will stay that way!
    Attached Files Attached Files

  10. #9
    Elite Vip passete's Avatar
    Join Date
    May 2011
    Location
    France
    Posts
    484
    Post Thanks / Like
    Rep Power
    9

    Default Last Barry Allen

    Here is the changelog for the 6.0.8 version of Barry Allen.

    * This is another version releaste in almost all bugs from previous versions should be now fixed, so all previous versions are no longer supported.

    * This version is compatible ONLY with the original loader # 84 of DMM (in 7025 it can therefore only with the loader 83 and 84, the cheating ipk for Loder also use append here)

    * Because we are working in the new boot logo BA thread still on, I took out ALL the old boot logos on a black and up to 10 new logos that have been made by SiennaRoot, Blue8 and ghostwriter. Please vote in the boot logo thread from which it will be the new default boot logo.

    Voting for the new boot logo

    * The boot manager should now ALL on / dev / input / event * respond, we must therefore change anything, no matter which remote control is used (old / new / DMM keyboard).

    * There is now a Autoswap feature - once you have created on / media / ba BA with a swapfile (minimum size is now 128MB), this in ALL the boot images (including Flash) automatically without beswapped fstab or the like.

    * For all boxes except the 7025 is the enigma2 restart when unpacking / save images of disabelt the installation, so it runs through enigma2 - is exactly why but now when backing also calls for the swapfile.

    * As a 'little help' for the new fixed mounting images without hard disk that I installed when a new BA FIRST image that will boot times when there are no settings inside then the / dev/sda1 (which is usually the hard disk) in the BA image on / media / hdd mount so that during the Settup wizard on first boot can restore the settings from there. Once settings are in the image but if this be not done, but if you mount the hard disk of the settings stored in clean, has no problem should be more.

    Devices * File system check of the BA is now when you are booted from Flash made when you type in telnet bainit 90, with all numbers> 89, the same effect as to avoid further confusion.

    * DO NOT use it OoZooN image (or other image where the loop device driver is fixed in kernel) in Flash or is not installed it on a 7025 then you MUST re-install the kernel-module-loop ipk in the flash image, otherwise Barry Allen is NOT ! work!

    * It is now a binary bainit and NO more shell script and it will stay that way!

    * The / MB_Images link now points to / media / hdd / backup or / media / ba / backup directory MB_Images which the dead - RIP
    Just copy your images from there into the new / MB_Images directory, because it is now unpacked from there and there secured for compatibility with other backup and Multiboot tools to be.

    * If multiple devices will have the label BA tried this during the installation to clean up
    Attached Files Attached Files

  11. #10
    Elite Vip passete's Avatar
    Join Date
    May 2011
    Location
    France
    Posts
    484
    Post Thanks / Like
    Rep Power
    9

    Default Last Barry Allen

    Here is the changelog for the 6.0.9 version of Barry Allen.

    * This is another version releaste in almost all bugs from previous versions should be now fixed, so all previous versions are no longer supported.

    * This version is compatible ONLY with the original loader # 84 of DMM (in 7025 it can therefore only with the loader 83 and 84, the cheating ipk for Loder also use append here)

    * The winner of the Boot Logo Contest has become the new default boot logo BA, the second and 3 placed and remain in the black kit, and you can of course own logos to / media / ba / copy and logos in the Boot Manager menu.

    * The boot manager should now ALL on / dev / input / event * respond, we must therefore change anything, no matter which remote control is used (old / new / DMM keyboard).

    * There is now a Autoswap feature - once you have created on / media / ba BA with a swapfile (minimum size is now 128MB), this in ALL the boot images (including Flash) automatically without beswapped fstab or the like.

    * For all boxes except the 7025 is the enigma2 restart when unpacking / save images of disabelt the installation, so it runs enigma2 through - but that's why now is the backup also requires the swapfile.

    Devices * File system check of the BA is now when you are booted from Flash made when you type in telnet bainit 90th

    * If you DO NOT OoZooN image in flash is used (or another image where the loop device driver in the kernel are fixed), then you MUST re-install the kernel-module-loop ipk in the flash image, otherwise Barry Allen NOT work! On the 7025, this is not necessary, because by the squashfs include all images already the loop driver.

    * The / MB_Images link now points to / media / hdd / backup or / media / ba / backup

    * I now have the static version of Gelink nfidump packed in the kit to click on an image where comic versions of libs used to work as well.

    * The non-functioning backup in BA should now be back to 6.0.8 fixed.
    Last edited by Satrunner; 22nd January 2012 at 23:54.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •