Results 1 to 5 of 5

Thread: Dm900 with OS2.5 Dream Elite 6 cable scan problem

  1. #1
    Newbie
    Join Date
    May 2010
    Posts
    6
    Post Thanks / Like
    Rep Power
    0

    Default Dm900 with OS2.5 Dream Elite 6 cable scan problem

    I have a Dm900 with OS2.5 Dream-Elite 6 and I want to scan Ziggo.
    But I can with (OS2.5) for Ziggo area: 474 Mhz, 6875 SR, QAM64 find no more than 100 ziggo channels.
    I cannot set the Network ID (05555) anywhere.
    The OS2.5 Image from Dreambox clearly differs from the Images from OpenATV. There is no cable scan in it.
    Does anyone know why you can find 393 channels with OpenAtv 6.4 and only 50 with the original OE2.5 and only 90 with the Complete scan?
    In etc / tuxbox / there is no cable.xml.

    In the OpenAtv 6.4 it is in that place. I removed the cable.xml and put it in the DM900 with OS2.5 software (etc / tuxbox). Then a hard restart (switch off and on again).
    But unfortunately only 50 channels were found again.
    I used all kinds of Images based on OE2.5 and there I had the problem that the DM900 found too few channels.
    Images based on OE.2.2, the 393 channels were found.

  2. #2
    Administrator makaveli's Avatar
    Join Date
    Jul 2016
    Posts
    762
    Post Thanks / Like
    Rep Power
    10

    Default AW: Dm900 with OS2.5 Dream Elite 6 cable scan problem

    DreamOS do not use cable.xml
    DreamOS scans first if some frequencies are available and then after this it will begin to scan the frequencies found previous.

    So if do not recognise than it must be reported to dmm itself. We will check if we can implement this and if not we will report directly to dmm this problem
    Dream-Elite Donation - Thanks for your support

  3. Thanks stazeb thanked for this post
    Likes stazeb liked this post
  4. #3
    Newbie
    Join Date
    May 2010
    Posts
    6
    Post Thanks / Like
    Rep Power
    0

    Default Re: AW: Dm900 with OS2.5 Dream Elite 6 cable scan problem

    Many thanks.
    Please fix this for Dutch Ziggo channels.
    In OpenAtv 6.4 I can scan all channels.

  5. #4
    Newbie
    Join Date
    May 2010
    Posts
    6
    Post Thanks / Like
    Rep Power
    0

    Default Re: AW: Dm900 with OS2.5 Dream Elite 6 cable scan problem

    Is any progress with fix this issue?
    I have reported this to DMM but I didn't receive any response!

  6. #5
    Newbie
    Join Date
    May 2010
    Posts
    6
    Post Thanks / Like
    Rep Power
    0

    Default Re: Dm900 with OS2.5 Dream Elite 6 cable scan problem

    Issue sold! Just boot OpenATV. Connect DreamBoxEdit. Read the ChannelList and use the Save button to save the list on your PC. Reboot the box into OE2.5 in flash. Again connect to DreamBoxEdit. This time load the saved ChannelList into DreamBoxEdit. Next use "Send file to Dreambox". When succesful reboot Enigma2 and the list should be there.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •