Results 1 to 10 of 10
  1. #1
    Newbie
    Join Date
    Dec 2017
    Posts
    12
    Post Thanks / Like
    Rep Power
    0

    Default Migliore DTT usb

    Ciao, ho visto il grande lavoro che avete fatto sui driver per le periferiche USB dvb-t e devo dire che siete stati magnifici. A questo punto mi chiedevo quale fra i vari tuner vi sentireste di consigliare all'acquisto visto che con i due del nostro principale provider sia con led verde che blu non mi trovo bene e che non ci sono ancora i driver per chiavette con chip siano (sms) come la mia hauppage ministick?

  2. #2
    Administrator makaveli's Avatar
    Join Date
    Jul 2016
    Posts
    741
    Post Thanks / Like
    Rep Power
    10

    Default AW: Migliore DTT usb

    Poi fare dei provi
    Poi attacare la chiavetta e poi lanci gli due commandi
    Code:
    lsusb
    dmesg
    e scrivi qui cosa esce cosi possiamo forse implementare anche la tua chiavetta
    Dream-Elite Donation - Thanks for your support

  3. #3
    Newbie
    Join Date
    Dec 2017
    Posts
    12
    Post Thanks / Like
    Rep Power
    0

    Default Re: Migliore DTT usb

    Eccomi:

    Code:
    root@dm900:~# lsusb
    Bus 004 Device 002: ID 2040:c000
    Bus 001 Device 001: ID 1d6b:0002
    Bus 002 Device 001: ID 1d6b:0003
    Bus 003 Device 001: ID 1d6b:0002
    Bus 004 Device 001: ID 1d6b:0002
    Bus 005 Device 001: ID 1d6b:0001
    Bus 006 Device 001: ID 1d6b:0001
    root@dm900:~# dmesg
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.14-1.17-dm900 (jenkins@oe25-dev) (gcc version 5.3.0 (GCC) ) #1 SMP Wed May 15 15:24:07 CEST 2019
    [    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] Machine model: BCM97252SSFF
    [    0.000000] moving dtb from 0x0000000007728000 to 0x0000000000837e70
    [    0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
    [    0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
    [    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] On node 0 totalpages: 524288
    [    0.000000]   Normal zone: 512 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
    [    0.000000]   HighMem zone: 3584 pages used for memmap
    [    0.000000]   HighMem zone: 458752 pages, LIFO batch:31
    [    0.000000] MCP: Enabling write pairing
    [    0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s8384 r8192 d16192 u32768
    [    0.000000] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523776
    [    0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Memory: 1006904K/2097152K available (6114K kernel code, 214K rwdata, 1596K rodata, 244K init, 208K bss, 1073864K reserved, 16384K cma-reserved, 786428K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc078fcec   (7712 kB)
    [    0.000000]       .init : 0xc0790000 - 0xc07cd0c0   ( 245 kB)
    [    0.000000]       .data : 0xc07ce000 - 0xc0803b20   ( 215 kB)
    [    0.000000]        .bss : 0xc0803b28 - 0xc0837e70   ( 209 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Additional per-CPU info printed with stalls.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
    [    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
    [    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
    [    0.000011] Switching to timer-based delay loop
    [    0.000236] Console: colour dummy device 80x30
    [    0.000255] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    [    0.000264] pid_max: default: 32768 minimum: 301
    [    0.000356] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000361] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.005895] Initializing cgroup subsys devices
    [    0.005912] Initializing cgroup subsys freezer
    [    0.005918] Initializing cgroup subsys net_cls
    [    0.005947] CPU: Testing write buffer coherency: ok
    [    0.006166] CPU0: update cpu_power 1024
    [    0.006174] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.006222] Setting up static identity map for 0x5d5ab8 - 0x5d5b10
    [    0.007460] CPU1: Booted secondary processor
    [    0.007479] CPU1: update cpu_power 1024
    [    0.007481] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.007551] Brought up 2 CPUs
    [    0.007562] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    [    0.007567] CPU: All CPU(s) started in SVC mode.
    [    0.007949] devtmpfs: initialized
    [    0.011569] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    [    0.012140] regulator-dummy: no parameters
    [    0.012316] NET: Registered protocol family 16
    [    0.013243] DMA: preallocated 2048 KiB pool for atomic coherent allocations
    [    0.013431] cpuidle: using governor ladder
    [    0.013436] cpuidle: using governor menu
    [    0.014585] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
    [    0.014671] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.016362] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
    [    0.016437] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
    [    0.016504] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
    [    0.016570] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
    [    0.016633] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
    [    0.016702] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
    [    0.016768] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
    [    0.016831] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
    [    0.016893] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
    [    0.016963] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
    [    0.017029] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
    [    0.017091] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
    [    0.017168] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
    [    0.017234] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
    [    0.017538] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.017766] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
    [    0.022116] bio: create slab  at 0
    [    0.022423] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022450] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
    [    0.022479] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022491] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
    [    0.022838] SCSI subsystem initialized
    [    0.022938] libata version 3.00 loaded.
    [    0.023054] usbcore: registered new interface driver usbfs
    [    0.023084] usbcore: registered new interface driver hub
    [    0.023141] usbcore: registered new device driver usb
    [    0.023173] media: Linux media interface: v0.10
    [    0.023199] Linux video capture interface: v2.00
    [    0.023235] pps_core: LinuxPPS API ver. 1 registered
    [    0.023238] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
    [    0.023249] PTP clock support registered
    [    0.023462] Advanced Linux Sound Architecture Driver Initialized.
    [    0.023746] Bluetooth: Core ver 2.18
    [    0.023761] NET: Registered protocol family 31
    [    0.023764] Bluetooth: HCI device and connection manager initialized
    [    0.023772] Bluetooth: HCI socket layer initialized
    [    0.023779] Bluetooth: L2CAP socket layer initialized
    [    0.023784] Bluetooth: SCO socket layer initialized
    [    0.024190] Switched to clocksource arch_sys_counter
    [    0.024205] cfg80211: Calling CRDA to update world regulatory domain
    [    0.028568] thermal thermal_zone0: failed to read out thermal zone 0
    [    0.028651] NET: Registered protocol family 2
    [    0.029056] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.029073] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.029095] TCP: Hash tables configured (established 2048 bind 2048)
    [    0.029129] TCP: reno registered
    [    0.029136] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029148] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029282] NET: Registered protocol family 1
    [    0.029502] RPC: Registered named UNIX socket transport module.
    [    0.029508] RPC: Registered udp transport module.
    [    0.029511] RPC: Registered tcp transport module.
    [    0.029515] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.029522] PCI: CLS 0 bytes, default 64
    [    0.030112] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.030454] bounce pool size: 64 pages
    [    0.030973] NFS: Registering the id_resolver key type
    [    0.031010] Key type id_resolver registered
    [    0.031015] Key type id_legacy registered
    [    0.031025] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.031146] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [    0.031455] msgmni has been set to 462
    [    0.032217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.032225] io scheduler noop registered
    [    0.032242] io scheduler cfq registered (default)
    [    0.032463] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
    [    0.032737] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
    [    0.098464] brcmstb_memc f1102000.memc-ddr: registered
    [    0.098492] brcmstb_memc f1182000.memc-ddr: registered
    [    0.098678] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.099459] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    [    0.100304] loop: module loaded
    [    0.100580] ahci brcmstb-ahci.0: can't get clock
    [    0.100661] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
    [    0.111204] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.111212] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part 
    [    0.112986] scsi0 : ahci_platform
    [    0.113236] scsi1 : ahci_platform
    [    0.113359] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    [    0.113364] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    [    0.113868] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
    [    0.113927] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
    [    0.114308] m25p80 spi32766.0: found mx25l25635e, expected m25p80
    [    0.114324] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
    [    0.114343] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
    [    0.114368] 5 ofpart partitions found on MTD device spi32766.0
    [    0.114372] Creating 5 MTD partitions on "spi32766.0":
    [    0.114378] 0x000000000000-0x000000200000 : "flash0.bolt"
    [    0.114875] 0x000000200000-0x000000220000 : "flash0.nvram"
    [    0.115301] 0x000000220000-0x000000240000 : "flash0.devtree"
    [    0.115708] 0x000000240000-0x000001000000 : "flash0.recovery"
    [    0.116101] 0x000000000000-0x000002000000 : "flash0"
    [    0.116808] libphy: Fixed MDIO Bus: probed
    [    0.116932] tun: Universal TUN/TAP device driver, 1.6
    [    0.116936] tun: (C) 1999-2004 Max Krasnyansky 
    [    0.117283] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    [    0.130200] libphy: bcmgenet MII bus: probed
    [    0.151080] xhci-brcm: xHCI BRCM driver
    [    0.151152] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.151171] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    [    0.151496] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    [    0.151624] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.151630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.151634] usb usb1: Product: xHCI Host Controller
    [    0.151639] usb usb1: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.151643] usb usb1: SerialNumber: f0471000.xhci_v2
    [    0.151967] hub 1-0:1.0: USB hub found
    [    0.151991] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    [    0.152106] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.152118] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    [    0.152256] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
    [    0.152262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.152266] usb usb2: Product: xHCI Host Controller
    [    0.152270] usb usb2: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.152274] usb usb2: SerialNumber: f0471000.xhci_v2
    [    0.152548] hub 2-0:1.0: USB hub found
    [    0.152569] hub 2-0:1.0: 2 ports detected
    [    0.152879] ehci-brcm: EHCI BRCM driver
    [    0.152955] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    [    0.152969] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    [    0.163081] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    [    0.168196] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.168306] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.168311] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.168316] usb usb3: Product: EHCI Host Controller
    [    0.168319] usb usb3: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.168324] usb usb3: SerialNumber: f0470300.ehci_v2
    [    0.168597] hub 3-0:1.0: USB hub found
    [    0.168619] hub 3-0:1.0: 1 port detected
    [    0.168824] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    [    0.168838] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    [    0.178936] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    [    0.184199] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.184296] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.184301] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.184305] usb usb4: Product: EHCI Host Controller
    [    0.184309] usb usb4: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.184313] usb usb4: SerialNumber: f0470500.ehci_v2
    [    0.184576] hub 4-0:1.0: USB hub found
    [    0.184599] hub 4-0:1.0: 1 port detected
    [    0.184840] ohci-brcm: OHCI BRCM driver
    [    0.184900] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    [    0.184916] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    [    0.184936] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    [    0.239316] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.239322] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.239326] usb usb5: Product: BRCM OHCI controller
    [    0.239330] usb usb5: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.239334] usb usb5: SerialNumber: f0470400.ohci_v2
    [    0.239600] hub 5-0:1.0: USB hub found
    [    0.239622] hub 5-0:1.0: 1 port detected
    [    0.239818] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    [    0.239831] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    [    0.239850] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    [    0.294307] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.294313] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.294317] usb usb6: Product: BRCM OHCI controller
    [    0.294322] usb usb6: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.294326] usb usb6: SerialNumber: f0470600.ohci_v2
    [    0.294596] hub 6-0:1.0: USB hub found
    [    0.294616] hub 6-0:1.0: 1 port detected
    [    0.294863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.294867] ehci-pci: EHCI PCI platform driver
    [    0.294905] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.294909] ohci-pci: OHCI PCI platform driver
    [    0.295025] usbcore: registered new interface driver usb-storage
    [    0.295031] i2c /dev entries driver
    [    0.295075] lirc_dev: IR Remote Control driver registered, major 250 
    [    0.295399] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    [    0.295498] usbcore: registered new interface driver btusb
    [    0.295558] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [    0.295726] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
    [    0.295801] sdhci: Secure Digital Host Controller Interface driver
    [    0.295804] sdhci: Copyright(c) Pierre Ossman
    [    0.295808] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.296901] mmc0: no vqmmc regulator found
    [    0.296907] mmc0: no vmmc regulator found
    [    0.327206] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    [    0.328269] mmc1: no vqmmc regulator found
    [    0.328273] mmc1: no vmmc regulator found
    [    0.358198] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    [    0.358306] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.358392] usbcore: registered new interface driver usbhid
    [    0.358395] usbhid: USB HID core driver
    [    0.358702] TCP: cubic registered
    [    0.358756] NET: Registered protocol family 10
    [    0.359269] NET: Registered protocol family 17
    [    0.359483] Bluetooth: RFCOMM TTY layer initialized
    [    0.359495] Bluetooth: RFCOMM socket layer initialized
    [    0.359498] Bluetooth: RFCOMM ver 1.11
    [    0.359502] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [    0.359505] Bluetooth: BNEP filters: protocol multicast
    [    0.359512] Bluetooth: BNEP socket layer initialized
    [    0.359515] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.359526] Bluetooth: HIDP socket layer initialized
    [    0.359574] l2tp_core: L2TP core driver, V2.0
    [    0.359595] Key type dns_resolver registered
    [    0.359669] Registering SWP/SWPB emulation handler
    [    0.359938] regulator-dummy: disabling
    [    0.360219] ALSA device list:
    [    0.360225]   No soundcards found.
    [    0.360275] Warning: unable to open an initial console.
    [    0.360329] Waiting for root device /dev/mmcblk0p2...
    [    0.486214] usb 4-1: new high-speed USB device number 2 using ehci-brcm
    [    0.495536] mmc0: new high speed SDHC card at address aaaa
    [    0.495739] mmcblk1: mmc0:aaaa SC16G 14.8 GiB 
    [    0.498003]  mmcblk1: p1
    [    0.565838] mmc1: BKOPS_EN bit is not set
    [    0.572078] mmc1: new high speed MMC card at address 0001
    [    0.572284] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB 
    [    0.572381] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
    [    0.572460] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
    [    0.572542] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
    [    0.575401]  mmcblk0: p1 p2 p3
    [    0.577468]  mmcblk0boot1: unknown partition table
    [    0.577937]  mmcblk0boot0: unknown partition table
    [    0.601343] usb 4-1: New USB device found, idVendor=2040, idProduct=c000
    [    0.601350] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    0.601354] usb 4-1: Product: WinTV MiniStick
    [    0.601359] usb 4-1: Manufacturer: Hauppauge Computer Works
    [    0.601363] usb 4-1: SerialNumber: 4035390616
    [    0.668301] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    0.668329] VFS: Mounted root (ext4 filesystem) readonly on device 179:10.
    [    0.669571] devtmpfs: mounted
    [    0.852238] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
    [    1.116530] random: nonblocking pool is initialized
    [    1.861220] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.862375] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
    [    1.862382] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [    1.863628] ata1.00: configured for UDMA/133
    [    1.863862] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 JA0O PQ: 0 ANSI: 5
    [    1.864273] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    1.864287] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    1.864483] sd 0:0:0:0: [sda] Write Protect is off
    [    1.864490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.864543] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.914450]  sda: sda1
    [    1.915043] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.974204] ata2: SATA link down (SStatus 0 SControl 300)
    [    3.444364] EXT4-fs (mmcblk1p1): recovery complete
    [    3.451805] EXT4-fs (mmcblk1p1): mounted filesystem with journalled data mode. Opts: barrier=1,data=journal
    [    3.627316] stb_core: module license 'Proprietary' taints kernel.
    [    3.627325] Disabling lock debugging due to kernel taint
    [    3.628760] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    3.629000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    3.645550] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [    3.696453] bcm7439: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20190312-dm900
    [    4.309454] 4:309266640 SMCB: controller reset timed out
    [    4.671659] register adapter
    [    4.671808] register adapter
    [    4.671924] register adapter
    [    4.672042] register adapter
    [    4.672150] register adapter
    [    4.672394] fp: uart recv error 98
    [    4.672852] swd: status is 0, pls check
    [    4.672856] swd: cannot init port
    [    4.672859] ble module not found
    [    4.672957] input: dreambox front panel as /devices/virtual/input/input2
    [    4.673136] OFFSET 1562222430 7676371
    [    4.673140] WKTMR 883208 12500630
    [    4.673144] LAST WKTMR 883198
    [    4.673157] set system time to 1563105638:746549
    [    4.673347] HDMI: CEC start ... state is now 1
    [    4.673483] set input to 0
    [    4.673488] set fb to 2(-1)
    [    4.674896] startvideomode '2160p50' read from /etc/videomode
    [    4.675121] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [    4.708804] HDMI: now connected
    [    4.744999] HDMI: CEC Physical Addr 1.0.0.0 set from EDID
    [    4.745003] HDMI: EDID read ok
    [    4.745006] HDMI: initial mode set!
    [    4.745013] using 50.00Hz as MonitorRefreshRate
    [    4.745017] SET FORMAT: display[0], format='2160p50'
    [    4.745025] HDMI mode
    [    4.745029] use EDID to detect colorspace
    [    4.745033] preferred colorspace: Itu_R_BT_2020_NCL
    [    4.745037] using 12bit output
    [    4.850300] HDMI: CEC use logical address 3
    [    4.850329] HDMI: CEC init completed... state is now 3!
    [    4.989600] HDMI: CEC send ok!
    [    5.146781] VIDEO0: enable deinterlacer
    [    5.146894] VIDEO0: set fallback framerate to 60000
    [    5.146904] VIDEO0: set progressive override mode to 1
    [    5.146907] VIDEO0: set streamtype!
    [    5.146913] ->      set MPEG2
    [    5.146916] ->      sw rave disabled!
    [    5.231371] VIDEO1: set fallback framerate to 60000
    [    5.231384] VIDEO1: set progressive override mode to 1
    [    5.231389] VIDEO1: set streamtype!
    [    5.231394] ->      set MPEG2
    [    5.231397] ->      sw rave disabled!
    [    5.266918] VIDEO2: set fallback framerate to 60000
    [    5.266928] VIDEO2: set progressive override mode to 1
    [    5.266931] VIDEO2: set streamtype!
    [    5.266936] ->      set MPEG2
    [    5.266939] ->      sw rave disabled!
    [    5.279488] set ac3 to downmix
    [    5.279502] set wmapro to downmix
    [    5.279510] set ac3plus to use_hdmi_caps
    [    5.279517] set dtshd to force_dts
    [    5.279525] set aac to downmix
    [    5.279859] audio ch2: add stereo (background decoder) input to mixer DUMMY2
    [    5.279896] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
    [    5.280214] DVB: registering new adapter (BCM7439)
    [    5.311066] autodetecting NIMs...
    [    5.821197] Found: Slot 0, ID: 1c (by CA)
    [    5.821204] Initializing adapter 0 (Si2166D-DVB-S2)
    [    5.828209] (NULL device *): DVB: registering adapter 0 frontend 0 (Si2166D)...
    [    5.828310] Initializing adapter 1 (Si2166D-DVB-S2)
    [    5.830255] (NULL device *): DVB: registering adapter 0 frontend 1 (Si2166D)...
    [    5.830690] init ALSA!
    [    5.831008] registered vtuner misc/vtuner0, minor 52
    [    5.831071] registered vtuner misc/vtuner1, minor 51
    [    5.831127] registered vtuner misc/vtuner2, minor 50
    [    5.831201] registered vtuner misc/vtuner3, minor 49
    [    5.831205] HDMI-RX: init
    [    5.831905] HDMI-RX: no device attached
    [    5.831951] HDMI-RX: video format change event
    [    5.831955] HDMI-RX: hdmi packet status stopped
    [    5.831959] HDMI-RX: hdmiInput0 Receiving DVI  format 
    [    5.831963] HDMI-RX: hdmiInput0 Color Space change from '' to ''
    [    5.831986] HDMI-RX: init done
    [    5.831990] bcm_vce_init()
    [    5.831993] bcm_vce_init() 0
    [    5.832386] CI stopped...
    [    5.854572] vice0: allocate output buffers
    [    5.857349] ble init (0)
    [    5.857559] input: dreambox remote control (bluetooth le) as /devices/virtual/input/input3
    [    5.904364] HDMI: SDCD Event
    [    5.969269] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [    9.695139] systemd[1]: Failed to set up the root directory for shared mount propagation: Invalid argument
    [    9.701822] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [    9.702045] systemd[1]: Detected architecture arm.
    [    9.703586] systemd[1]: Set hostname to .
    [    9.833892] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.service is marked executable. Please remove executable permission bits. Proceeding anyway.
    [    9.851140] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.socket is marked executable. Please remove executable permission bits. Proceeding anyway.
    [    9.865449] systemd[1]: Listening on Syslog Socket.
    [    9.865739] systemd[1]: Listening on Journal Socket (/dev/log).
    [    9.865924] systemd[1]: Reached target Swap.
    [    9.867047] systemd[1]: Set up automount data.automount.
    [    9.867113] systemd[1]: Reached target Remote File Systems.
    [    9.867154] systemd[1]: Reached target Paths.
    [    9.867295] systemd[1]: Listening on udev Control Socket.
    [    9.867396] systemd[1]: Listening on udev Kernel Socket.
    [    9.867508] systemd[1]: Listening on Journal Socket.
    [    9.867891] systemd[1]: Created slice User and Session Slice.
    [    9.868059] systemd[1]: Created slice System Slice.
    [    9.869797] systemd[1]: Starting Remount Root and Kernel File Systems...
    [    9.873556] systemd[1]: Starting Load Kernel Modules...
    [    9.875574] systemd[1]: Starting Generate environment for enigma2...
    [    9.876126] systemd[1]: Created slice system-serial\x2dgetty.slice.
    [    9.876298] systemd[1]: Reached target Slices.
    [    9.878748] systemd[1]: Starting Setup Virtual Console...
    [    9.882565] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [    9.888648] systemd[1]: Mounting POSIX Message Queue File System...
    [    9.891820] systemd[1]: Starting Journal Service...
    [    9.913529] systemd[1]: Mounted POSIX Message Queue File System.
    [    9.914568] systemd[1]: Started Remount Root and Kernel File Systems.
    [    9.915117] systemd[1]: Started Setup Virtual Console.
    [    9.926477] systemd[1]: Starting udev Coldplug all Devices...
    [    9.928578] systemd[1]: Starting Load/Save Random Seed...
    [    9.946068] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [    9.947963] systemd[1]: Starting Create Static Device Nodes in /dev...
    [   10.028043] input: dreambox ir keyboard as /devices/virtual/input/input4
    [   10.028306] input: dreambox ir mouse as /devices/virtual/input/input5
    [   10.029738] systemd[1]: Started Load Kernel Modules.
    [   10.031597] systemd[1]: Starting Apply Kernel Variables...
    [   10.047816] systemd[1]: Started Load/Save Random Seed.
    [   10.063671] systemd[1]: Started Apply Kernel Variables.
    [   10.133486] systemd[1]: Started Journal Service.
    [   10.200627] systemd-journald[124]: Received request to flush runtime journal from PID 1
    [   11.152469] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   11.235523] VIDEO0: set blank to 0
    [   11.235688] sync0 is off so we enable it
    [   11.235695] sync0: allocated pcroffset 0
    [   11.235704] sync0: playback!
    [   11.235722] VIDEO0: total delay: 0 (0 ms)
    [   11.240539] VIDEO0: start decode
    [   11.240558] VIDEO0: flush video decoder
    [   11.240565] VIDEO0 got pts failed !!!! (ret 0)
    [   11.258617] VIDEO0: first pts 0x0
    [   11.258635] VIDEO0: EOTF changed to SDR
    [   11.258640] VIDEO0: framerate changed 3
    [   11.258644] VIDEO0: resolution changed (1280 720)
    [   11.258647] VIDEO0: aspect changed 3
    [   11.258762] set current avs auto aspect to 16:9
    [   11.258775] set current avs auto aspect to 16:9
    [   11.258784] HDMI: using SDR eotf
    [   11.258813] set sb to 3(1)
    [   11.397072] VIDEO0: stop decode
    [   11.397088] sync0 1fff no decoder left in sync handling so disable
    [   11.397092] sync0: was last pcroffset0 user so free it
    [   12.257210] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [   12.259336] f0b00000.ethernet: configuring instance for internal PHY
    [   12.259424] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   13.409561] si2183(0): DVB-S(2) voltage disabled now
    [   13.411042] si2183(0): DVB-S(2) voltage disabled now
    [   13.413950] si2183(1): DVB-S(2) voltage disabled now
    [   13.415100] si2183(1): DVB-S(2) voltage disabled now
    [   13.432599] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
    [   13.432712] HDMI: CEC set devtype to 0
    [   13.432722] HDMI: CEC start ... state is now 1
    [   13.432749] HDMI: CEC returned state 1
    [   13.432755] HDMI: CEC state now 801
    [   13.495735] HDMI: CEC use logical address 3
    [   13.495774] HDMI: CEC init completed... state is now 3!
    [   13.564020] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   13.632481] HDMI: CEC send ok!
    [   14.263315] libphy: f0b00000.etherne:01 - Link is Down
    [   14.588480] 0 ms: 
    [   14.621594] 33 ms: 0
    [   14.631391] 10 ms: 0
    [   14.642444] 11 ms: 0
    [   14.965447] 323 ms: 0
    [   15.014219] 49 ms: 3
    [   15.021828] 7 ms: 3
    [   15.022713] 1 ms: 3
    [   15.031905] 9 ms: 3
    [   15.168115] 136 ms: 3
    [   15.195171] 27 ms: 5
    [   15.201068] 5 ms: 5
    [   15.201962] 1 ms: 5
    [   15.202886] 1 ms: 5
    [   15.794750] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
    [   15.794781] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   15.917513] 715 ms: 5
    [   15.918932] 1 ms: 9
    [   16.019352] 101 ms: 9
    [   16.020332] 1 ms: 9
    [   16.078777] 58 ms: 9
    [   16.137534] 59 ms: 9
    [   16.138851] 1 ms: 10
    [   16.143636] 5 ms: 10
    [   16.144782] 1 ms: 10
    [   16.145934] 1 ms: 10
    [   16.154673] 9 ms: 10
    [   16.161665] 7 ms: 10
    [   16.252644] change audioenc bitrate to 256000 bits/s
    [   16.261417] vice0: change videoenc bitrate to 6000000 bits/s
    [   16.261430] change audioenc bitrate to 128000 bits/s
    [   16.274394] vice0: change gop length to 0ms
    [   16.274406] vice0: allow new gop on new scene off
    [   16.274413] vice0: change open gop to off
    [   16.274419] vice0: change p-frames to 4
    [   16.274425] vice0: change b-frames to 2
    [   16.274430] vice0: change to 0 slices per pic
    [   16.274497] vice0: change h264 profile to main
    [   16.274506] vice0: change h264 level to 3.1
    [   16.380498] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
    [   16.404410] 243 ms: 10
    [   16.405506] 1 ms: 11
    [   16.682716] 277 ms: 11
    [   16.833804] 151 ms: 12
    [   16.852033] 18 ms: 14
    [   16.860651] 9 ms: 14
    [   16.861759] 1 ms: 14
    [   16.863373] 2 ms: 15
    [   16.867970] 4 ms: 15
    [   16.869297] 2 ms: 15
    [   16.890241] 21 ms: 15
    [   18.580698] 1690 ms: 15
    [   18.610828] 30 ms: 28
    [   18.611872] 1 ms: 28
    [   18.639335] 28 ms: 28
    [   18.641152] 1 ms: 28
    [   18.642330] 2 ms: 28
    [   18.644864] 2 ms: 28
    [   18.649499] 5 ms: 28
    [   18.658895] 9 ms: 28
    [   18.659899] 1 ms: 28
    [   18.760771] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   18.815256] 156 ms: 28
    [   18.940053] 124 ms: 29
    [   18.943039] set input to 0
    [   18.943047] set fb to 2(-1)
    [   18.943057] set current avs auto aspect to 16:9
    [   18.943085] set sb to 3(1)
    [   18.944054] set ac3 to downmix
    [   18.944719] set ac3plus to use_hdmi_caps
    [   18.946369] HDMI: using SDR eotf
    [   18.946663] HDMI: using SDR eotf
    [   18.946954] using 50.00Hz as MonitorRefreshRate
    [   18.946966] VIDEO1: shared window not available
    [   18.946991] SET FORMAT: display[0], format='2160p50'
    [   18.947000] HDMI mode
    [   18.947005] use EDID to detect colorspace
    [   18.947009] preferred colorspace: Itu_R_BT_2020_NCL
    [   18.947013] using 12bit output
    [   19.068952] VIDEO1: shared window not available
    [   19.068990] set current avs auto aspect to 16:9
    [   19.069012] HDMI: using SDR eotf
    [   19.069032] set sb to 3(1)
    [   19.168928] using 50.00Hz as MonitorRefreshRate
    [   19.168941] VIDEO1: shared window not available
    [   19.168965] SET FORMAT: display[0], format='2160p50'
    [   19.168974] HDMI mode
    [   19.168979] use EDID to detect colorspace
    [   19.168983] preferred colorspace: Itu_R_BT_2020_NCL
    [   19.168987] using 12bit output
    [   19.288954] VIDEO1: shared window not available
    [   19.288994] set current avs auto aspect to 16:9
    [   19.289017] HDMI: using SDR eotf
    [   19.289037] set sb to 3(1)
    [   19.289630] 350 ms: 30
    [   19.296215] 7 ms: 35
    [   19.299841] 3 ms: 35
    [   19.340639] 41 ms: 35
    [   19.347215] 7 ms: 35
    [   23.847303] set ac3plus to hdmi_best
    [   23.847451] set dtshd to hdmi_best
    [   23.847560] set aac to hdmi_best
    [   23.847659] set wmapro to hdmi_best
    [   24.147079] set current avs auto aspect to 16:9
    [   24.147108] set sb to 3(1)
    [   24.147366] set current avs auto aspect to 16:9
    [   24.147389] set sb to 3(1)
    [   24.147489] set current avs auto aspect to 16:9
    [   24.147507] set sb to 3(1)
    [   24.147595] set current avs auto aspect to 16:9
    [   24.147607] set sb to 3(1)
    [   24.168882] set current avs auto aspect to 16:9
    [   24.168931] set sb to 3(1)
    [   24.169149] set current avs auto aspect to 16:9
    [   24.169173] set sb to 3(1)
    [   24.189030] set current avs auto aspect to 16:9
    [   24.189749] set current avs auto aspect to 16:9
    [   24.189866] set current avs auto aspect to 16:9
    [   24.189969] set current avs auto aspect to 16:9
    [   24.190412] set current avs auto aspect to 16:9
    [   24.190484] set current avs auto aspect to 16:9
    [   24.190545] set current avs auto aspect to 16:9
    [   24.190895] set current avs auto aspect to 16:9
    [   24.190982] set current avs auto aspect to 16:9
    [   24.191252] set sb to 3(1)
    [   24.192932] set current avs auto aspect to 16:9
    [   24.192964] set sb to 3(1)
    [   24.193076] set current avs auto aspect to 16:9
    [   24.193102] set sb to 3(1)
    [   24.193382] set current avs auto aspect to 16:9
    [   24.193404] set sb to 3(1)
    [   24.300386] 4953 ms: 35
    [   24.354154] 53 ms: 82
    [   25.108956] set current avs auto aspect to 16:9
    [   25.108988] set sb to 3(1)
    [   25.109102] set current avs auto aspect to 16:9
    [   25.109117] set sb to 3(1)
    [   25.110321] set current avs auto aspect to 16:9
    [   25.110348] set sb to 3(1)
    [   25.110477] set current avs auto aspect to 16:9
    [   25.110493] set sb to 3(1)
    [   25.657731] 1304 ms: 83
    [   26.104637] 447 ms: 96
    [   26.144144] set mute 0 1
    [   26.145345] 41 ms: 99
    [   26.150856] 5 ms: 99
    [   26.424260] si2183(1): DVB-S(2) voltage is 18V now
    [   26.425395] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   26.425608] start PCR0 on dmx 0 pid:17e5 index 2
    [   26.425776] start AUDIO0 on dmx 0 pid:17e6 index 1
    [   26.425782] audio ch0: xpt start
    [   26.425791] audio ch0: reset GA threshold to 8ms
    [   26.425808] sync0 is off so we enable it
    [   26.425814] sync0: allocated pcroffset 0
    [   26.425828] sync0: demux-index 0 pcr pid 17e5
    [   26.425852] sync0: using 2 as pcr pidchannel
    [   26.425915] audio ch0: MPEG
    [   26.425923] audio ch0: streamtype set 0
    [   26.425927] audio ch0: streamtype_set: stop rave
    [   26.425955] audio ch0: add stereo input to mixer DAC
    [   26.425976] audio ch0: add stereo input to mixer SPDIF
    [   26.425993] audio ch0: add stereo input to mixer MAI
    [   26.426006] audio ch0: mai sample rate changed isr (48000)
    [   26.426025] audio ch0: streamtype_set: restart rave
    [   26.426130] audio ch0: decoder start
    [   26.426137] audio ch0: video delay 0 (0 ms)
    [   26.426143] VIDEO0: total delay: 0 (0 ms)
    [   26.427176] start VIDEO0 on dmx 0 pid:17e5 index 2
    [   26.427245] VIDEO0: total delay: 0 (0 ms)
    [   26.432410] VIDEO0: start decode
    [   26.444776] HDMI: CEC returned state 3
    [   26.444786] HDMI: CEC state now 803
    [   26.778822] HDMI: CEC send ok!
    [   26.896012] HDMI: CEC send ok!
    [   27.056769] HDMI: CEC send ok!
    [   27.387878] HDMI: CEC send ok!
    [   27.443515] HDMI: CEC send ok!
    [   27.577256] HDMI: CEC recv ok!
    [   27.714720] HDMI: CEC send ok!
    [   27.746359] si2183(1): start tune freq 1943000, sr 34200000, delsys 6
    [   27.746367] si2183(1): IS_ID 35
    [   27.746373] si2183(1): PLS_MODE 1, PLS_CODE 0
    [   27.746814] si2183(1): PLS Gold code 0 set
    [   27.834380] HDMI: CEC send ok!
    [   27.845349] si2183(1): found carrier after 112 ms
    [   27.902522] HDMI: CEC send ok!
    [   28.036272] HDMI: CEC recv ok!
    [   28.104183] HDMI: CEC send ok!
    [   28.131754] si2183(1): final lock after 398 ms
    [   28.228816] HDMI: CEC send ok!
    [   28.333788] HDMI: CEC recv ok!
    [   28.388538] audio ch0: first pts 0xb126ae26, stc 0xb1269b16, pcr valid
    [   28.397768] HDMI: CEC send ok
    [   28.420525] audio ch0: lock
    [   28.420555] audio ch0: sample rate changed isr (48000)
    [   28.487512] audio ch0: status ready isr
    [   28.518963] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   28.608716] HDMI: CEC recv ok!
    [   28.672722] HDMI: CEC send ok!
    [   28.783211] HDMI: CEC recv ok!
    [   28.847212] HDMI: CEC send ok!
    [   28.915405] HDMI: CEC send ok!
    [   28.955337] VIDEO0: first pts 0xb127f1f0
    [   28.955366] VIDEO0: resolution changed (720 576)
    [   29.016455] HDMI: CEC recv ok!
    [   29.105230] VIDEO0: enable tsm
    [   29.475311] VIDEO0: progressive changed (0)
    [   71.108760] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
    [   71.148587] set current avs auto aspect to 16:9
    [   71.148614] set sb to 3(1)
    [ 1971.182737] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
    [ 1971.222562] set current avs auto aspect to 16:9
    [ 1971.222591] set sb to 3(1)
    root@dm900:

  4. #4
    Administrator deskjet's Avatar
    Join Date
    Jan 2014
    Location
    Calabria
    Posts
    1,913
    Post Thanks / Like
    Rep Power
    10

    Default Re: Migliore DTT usb

    Quote Originally Posted by SonnyRed View Post
    Eccomi:

    Code:
    root@dm900:~# lsusb
    Bus 004 Device 002: ID 2040:c000
    Bus 001 Device 001: ID 1d6b:0002
    Bus 002 Device 001: ID 1d6b:0003
    Bus 003 Device 001: ID 1d6b:0002
    Bus 004 Device 001: ID 1d6b:0002
    Bus 005 Device 001: ID 1d6b:0001
    Bus 006 Device 001: ID 1d6b:0001
    root@dm900:~# dmesg
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.14-1.17-dm900 (jenkins@oe25-dev) (gcc version 5.3.0 (GCC) ) #1 SMP Wed May 15 15:24:07 CEST 2019
    [    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] Machine model: BCM97252SSFF
    [    0.000000] moving dtb from 0x0000000007728000 to 0x0000000000837e70
    [    0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
    [    0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
    [    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] On node 0 totalpages: 524288
    [    0.000000]   Normal zone: 512 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
    [    0.000000]   HighMem zone: 3584 pages used for memmap
    [    0.000000]   HighMem zone: 458752 pages, LIFO batch:31
    [    0.000000] MCP: Enabling write pairing
    [    0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s8384 r8192 d16192 u32768
    [    0.000000] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523776
    [    0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Memory: 1006904K/2097152K available (6114K kernel code, 214K rwdata, 1596K rodata, 244K init, 208K bss, 1073864K reserved, 16384K cma-reserved, 786428K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc078fcec   (7712 kB)
    [    0.000000]       .init : 0xc0790000 - 0xc07cd0c0   ( 245 kB)
    [    0.000000]       .data : 0xc07ce000 - 0xc0803b20   ( 215 kB)
    [    0.000000]        .bss : 0xc0803b28 - 0xc0837e70   ( 209 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Additional per-CPU info printed with stalls.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
    [    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
    [    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
    [    0.000011] Switching to timer-based delay loop
    [    0.000236] Console: colour dummy device 80x30
    [    0.000255] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    [    0.000264] pid_max: default: 32768 minimum: 301
    [    0.000356] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000361] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.005895] Initializing cgroup subsys devices
    [    0.005912] Initializing cgroup subsys freezer
    [    0.005918] Initializing cgroup subsys net_cls
    [    0.005947] CPU: Testing write buffer coherency: ok
    [    0.006166] CPU0: update cpu_power 1024
    [    0.006174] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.006222] Setting up static identity map for 0x5d5ab8 - 0x5d5b10
    [    0.007460] CPU1: Booted secondary processor
    [    0.007479] CPU1: update cpu_power 1024
    [    0.007481] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.007551] Brought up 2 CPUs
    [    0.007562] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    [    0.007567] CPU: All CPU(s) started in SVC mode.
    [    0.007949] devtmpfs: initialized
    [    0.011569] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    [    0.012140] regulator-dummy: no parameters
    [    0.012316] NET: Registered protocol family 16
    [    0.013243] DMA: preallocated 2048 KiB pool for atomic coherent allocations
    [    0.013431] cpuidle: using governor ladder
    [    0.013436] cpuidle: using governor menu
    [    0.014585] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
    [    0.014671] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.016362] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
    [    0.016437] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
    [    0.016504] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
    [    0.016570] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
    [    0.016633] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
    [    0.016702] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
    [    0.016768] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
    [    0.016831] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
    [    0.016893] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
    [    0.016963] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
    [    0.017029] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
    [    0.017091] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
    [    0.017168] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
    [    0.017234] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
    [    0.017538] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.017766] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
    [    0.022116] bio: create slab  at 0
    [    0.022423] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022450] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
    [    0.022479] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022491] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
    [    0.022838] SCSI subsystem initialized
    [    0.022938] libata version 3.00 loaded.
    [    0.023054] usbcore: registered new interface driver usbfs
    [    0.023084] usbcore: registered new interface driver hub
    [    0.023141] usbcore: registered new device driver usb
    [    0.023173] media: Linux media interface: v0.10
    [    0.023199] Linux video capture interface: v2.00
    [    0.023235] pps_core: LinuxPPS API ver. 1 registered
    [    0.023238] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
    [    0.023249] PTP clock support registered
    [    0.023462] Advanced Linux Sound Architecture Driver Initialized.
    [    0.023746] Bluetooth: Core ver 2.18
    [    0.023761] NET: Registered protocol family 31
    [    0.023764] Bluetooth: HCI device and connection manager initialized
    [    0.023772] Bluetooth: HCI socket layer initialized
    [    0.023779] Bluetooth: L2CAP socket layer initialized
    [    0.023784] Bluetooth: SCO socket layer initialized
    [    0.024190] Switched to clocksource arch_sys_counter
    [    0.024205] cfg80211: Calling CRDA to update world regulatory domain
    [    0.028568] thermal thermal_zone0: failed to read out thermal zone 0
    [    0.028651] NET: Registered protocol family 2
    [    0.029056] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.029073] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.029095] TCP: Hash tables configured (established 2048 bind 2048)
    [    0.029129] TCP: reno registered
    [    0.029136] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029148] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029282] NET: Registered protocol family 1
    [    0.029502] RPC: Registered named UNIX socket transport module.
    [    0.029508] RPC: Registered udp transport module.
    [    0.029511] RPC: Registered tcp transport module.
    [    0.029515] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.029522] PCI: CLS 0 bytes, default 64
    [    0.030112] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.030454] bounce pool size: 64 pages
    [    0.030973] NFS: Registering the id_resolver key type
    [    0.031010] Key type id_resolver registered
    [    0.031015] Key type id_legacy registered
    [    0.031025] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.031146] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [    0.031455] msgmni has been set to 462
    [    0.032217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.032225] io scheduler noop registered
    [    0.032242] io scheduler cfq registered (default)
    [    0.032463] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
    [    0.032737] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
    [    0.098464] brcmstb_memc f1102000.memc-ddr: registered
    [    0.098492] brcmstb_memc f1182000.memc-ddr: registered
    [    0.098678] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.099459] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    [    0.100304] loop: module loaded
    [    0.100580] ahci brcmstb-ahci.0: can't get clock
    [    0.100661] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
    [    0.111204] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.111212] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part 
    [    0.112986] scsi0 : ahci_platform
    [    0.113236] scsi1 : ahci_platform
    [    0.113359] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    [    0.113364] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    [    0.113868] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
    [    0.113927] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
    [    0.114308] m25p80 spi32766.0: found mx25l25635e, expected m25p80
    [    0.114324] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
    [    0.114343] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
    [    0.114368] 5 ofpart partitions found on MTD device spi32766.0
    [    0.114372] Creating 5 MTD partitions on "spi32766.0":
    [    0.114378] 0x000000000000-0x000000200000 : "flash0.bolt"
    [    0.114875] 0x000000200000-0x000000220000 : "flash0.nvram"
    [    0.115301] 0x000000220000-0x000000240000 : "flash0.devtree"
    [    0.115708] 0x000000240000-0x000001000000 : "flash0.recovery"
    [    0.116101] 0x000000000000-0x000002000000 : "flash0"
    [    0.116808] libphy: Fixed MDIO Bus: probed
    [    0.116932] tun: Universal TUN/TAP device driver, 1.6
    [    0.116936] tun: (C) 1999-2004 Max Krasnyansky 
    [    0.117283] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    [    0.130200] libphy: bcmgenet MII bus: probed
    [    0.151080] xhci-brcm: xHCI BRCM driver
    [    0.151152] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.151171] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    [    0.151496] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    [    0.151624] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.151630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.151634] usb usb1: Product: xHCI Host Controller
    [    0.151639] usb usb1: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.151643] usb usb1: SerialNumber: f0471000.xhci_v2
    [    0.151967] hub 1-0:1.0: USB hub found
    [    0.151991] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    [    0.152106] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.152118] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    [    0.152256] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
    [    0.152262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.152266] usb usb2: Product: xHCI Host Controller
    [    0.152270] usb usb2: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.152274] usb usb2: SerialNumber: f0471000.xhci_v2
    [    0.152548] hub 2-0:1.0: USB hub found
    [    0.152569] hub 2-0:1.0: 2 ports detected
    [    0.152879] ehci-brcm: EHCI BRCM driver
    [    0.152955] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    [    0.152969] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    [    0.163081] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    [    0.168196] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.168306] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.168311] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.168316] usb usb3: Product: EHCI Host Controller
    [    0.168319] usb usb3: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.168324] usb usb3: SerialNumber: f0470300.ehci_v2
    [    0.168597] hub 3-0:1.0: USB hub found
    [    0.168619] hub 3-0:1.0: 1 port detected
    [    0.168824] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    [    0.168838] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    [    0.178936] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    [    0.184199] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.184296] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.184301] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.184305] usb usb4: Product: EHCI Host Controller
    [    0.184309] usb usb4: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.184313] usb usb4: SerialNumber: f0470500.ehci_v2
    [    0.184576] hub 4-0:1.0: USB hub found
    [    0.184599] hub 4-0:1.0: 1 port detected
    [    0.184840] ohci-brcm: OHCI BRCM driver
    [    0.184900] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    [    0.184916] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    [    0.184936] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    [    0.239316] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.239322] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.239326] usb usb5: Product: BRCM OHCI controller
    [    0.239330] usb usb5: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.239334] usb usb5: SerialNumber: f0470400.ohci_v2
    [    0.239600] hub 5-0:1.0: USB hub found
    [    0.239622] hub 5-0:1.0: 1 port detected
    [    0.239818] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    [    0.239831] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    [    0.239850] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    [    0.294307] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.294313] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.294317] usb usb6: Product: BRCM OHCI controller
    [    0.294322] usb usb6: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.294326] usb usb6: SerialNumber: f0470600.ohci_v2
    [    0.294596] hub 6-0:1.0: USB hub found
    [    0.294616] hub 6-0:1.0: 1 port detected
    [    0.294863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.294867] ehci-pci: EHCI PCI platform driver
    [    0.294905] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.294909] ohci-pci: OHCI PCI platform driver
    [    0.295025] usbcore: registered new interface driver usb-storage
    [    0.295031] i2c /dev entries driver
    [    0.295075] lirc_dev: IR Remote Control driver registered, major 250 
    [    0.295399] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    [    0.295498] usbcore: registered new interface driver btusb
    [    0.295558] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [    0.295726] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
    [    0.295801] sdhci: Secure Digital Host Controller Interface driver
    [    0.295804] sdhci: Copyright(c) Pierre Ossman
    [    0.295808] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.296901] mmc0: no vqmmc regulator found
    [    0.296907] mmc0: no vmmc regulator found
    [    0.327206] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    [    0.328269] mmc1: no vqmmc regulator found
    [    0.328273] mmc1: no vmmc regulator found
    [    0.358198] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    [    0.358306] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.358392] usbcore: registered new interface driver usbhid
    [    0.358395] usbhid: USB HID core driver
    [    0.358702] TCP: cubic registered
    [    0.358756] NET: Registered protocol family 10
    [    0.359269] NET: Registered protocol family 17
    [    0.359483] Bluetooth: RFCOMM TTY layer initialized
    [    0.359495] Bluetooth: RFCOMM socket layer initialized
    [    0.359498] Bluetooth: RFCOMM ver 1.11
    [    0.359502] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [    0.359505] Bluetooth: BNEP filters: protocol multicast
    [    0.359512] Bluetooth: BNEP socket layer initialized
    [    0.359515] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.359526] Bluetooth: HIDP socket layer initialized
    [    0.359574] l2tp_core: L2TP core driver, V2.0
    [    0.359595] Key type dns_resolver registered
    [    0.359669] Registering SWP/SWPB emulation handler
    [    0.359938] regulator-dummy: disabling
    [    0.360219] ALSA device list:
    [    0.360225]   No soundcards found.
    [    0.360275] Warning: unable to open an initial console.
    [    0.360329] Waiting for root device /dev/mmcblk0p2...
    [    0.486214] usb 4-1: new high-speed USB device number 2 using ehci-brcm
    [    0.495536] mmc0: new high speed SDHC card at address aaaa
    [    0.495739] mmcblk1: mmc0:aaaa SC16G 14.8 GiB 
    [    0.498003]  mmcblk1: p1
    [    0.565838] mmc1: BKOPS_EN bit is not set
    [    0.572078] mmc1: new high speed MMC card at address 0001
    [    0.572284] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB 
    [    0.572381] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
    [    0.572460] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
    [    0.572542] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
    [    0.575401]  mmcblk0: p1 p2 p3
    [    0.577468]  mmcblk0boot1: unknown partition table
    [    0.577937]  mmcblk0boot0: unknown partition table
    [    0.601343] usb 4-1: New USB device found, idVendor=2040, idProduct=c000
    [    0.601350] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    0.601354] usb 4-1: Product: WinTV MiniStick
    [    0.601359] usb 4-1: Manufacturer: Hauppauge Computer Works
    [    0.601363] usb 4-1: SerialNumber: 4035390616
    [    0.668301] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    0.668329] VFS: Mounted root (ext4 filesystem) readonly on device 179:10.
    [    0.669571] devtmpfs: mounted
    [    0.852238] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
    [    1.116530] random: nonblocking pool is initialized
    [    1.861220] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.862375] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
    [    1.862382] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [    1.863628] ata1.00: configured for UDMA/133
    [    1.863862] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 JA0O PQ: 0 ANSI: 5
    [    1.864273] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    1.864287] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    1.864483] sd 0:0:0:0: [sda] Write Protect is off
    [    1.864490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.864543] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.914450]  sda: sda1
    [    1.915043] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.974204] ata2: SATA link down (SStatus 0 SControl 300)
    [    3.444364] EXT4-fs (mmcblk1p1): recovery complete
    [    3.451805] EXT4-fs (mmcblk1p1): mounted filesystem with journalled data mode. Opts: barrier=1,data=journal
    [    3.627316] stb_core: module license 'Proprietary' taints kernel.
    [    3.627325] Disabling lock debugging due to kernel taint
    [    3.628760] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    3.629000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    3.645550] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [    3.696453] bcm7439: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20190312-dm900
    [    4.309454] 4:309266640 SMCB: controller reset timed out
    [    4.671659] register adapter
    [    4.671808] register adapter
    [    4.671924] register adapter
    [    4.672042] register adapter
    [    4.672150] register adapter
    [    4.672394] fp: uart recv error 98
    [    4.672852] swd: status is 0, pls check
    [    4.672856] swd: cannot init port
    [    4.672859] ble module not found
    [    4.672957] input: dreambox front panel as /devices/virtual/input/input2
    [    4.673136] OFFSET 1562222430 7676371
    [    4.673140] WKTMR 883208 12500630
    [    4.673144] LAST WKTMR 883198
    [    4.673157] set system time to 1563105638:746549
    [    4.673347] HDMI: CEC start ... state is now 1
    [    4.673483] set input to 0
    [    4.673488] set fb to 2(-1)
    [    4.674896] startvideomode '2160p50' read from /etc/videomode
    [    4.675121] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [    4.708804] HDMI: now connected
    [    4.744999] HDMI: CEC Physical Addr 1.0.0.0 set from EDID
    [    4.745003] HDMI: EDID read ok
    [    4.745006] HDMI: initial mode set!
    [    4.745013] using 50.00Hz as MonitorRefreshRate
    [    4.745017] SET FORMAT: display[0], format='2160p50'
    [    4.745025] HDMI mode
    [    4.745029] use EDID to detect colorspace
    [    4.745033] preferred colorspace: Itu_R_BT_2020_NCL
    [    4.745037] using 12bit output
    [    4.850300] HDMI: CEC use logical address 3
    [    4.850329] HDMI: CEC init completed... state is now 3!
    [    4.989600] HDMI: CEC send ok!
    [    5.146781] VIDEO0: enable deinterlacer
    [    5.146894] VIDEO0: set fallback framerate to 60000
    [    5.146904] VIDEO0: set progressive override mode to 1
    [    5.146907] VIDEO0: set streamtype!
    [    5.146913] ->      set MPEG2
    [    5.146916] ->      sw rave disabled!
    [    5.231371] VIDEO1: set fallback framerate to 60000
    [    5.231384] VIDEO1: set progressive override mode to 1
    [    5.231389] VIDEO1: set streamtype!
    [    5.231394] ->      set MPEG2
    [    5.231397] ->      sw rave disabled!
    [    5.266918] VIDEO2: set fallback framerate to 60000
    [    5.266928] VIDEO2: set progressive override mode to 1
    [    5.266931] VIDEO2: set streamtype!
    [    5.266936] ->      set MPEG2
    [    5.266939] ->      sw rave disabled!
    [    5.279488] set ac3 to downmix
    [    5.279502] set wmapro to downmix
    [    5.279510] set ac3plus to use_hdmi_caps
    [    5.279517] set dtshd to force_dts
    [    5.279525] set aac to downmix
    [    5.279859] audio ch2: add stereo (background decoder) input to mixer DUMMY2
    [    5.279896] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
    [    5.280214] DVB: registering new adapter (BCM7439)
    [    5.311066] autodetecting NIMs...
    [    5.821197] Found: Slot 0, ID: 1c (by CA)
    [    5.821204] Initializing adapter 0 (Si2166D-DVB-S2)
    [    5.828209] (NULL device *): DVB: registering adapter 0 frontend 0 (Si2166D)...
    [    5.828310] Initializing adapter 1 (Si2166D-DVB-S2)
    [    5.830255] (NULL device *): DVB: registering adapter 0 frontend 1 (Si2166D)...
    [    5.830690] init ALSA!
    [    5.831008] registered vtuner misc/vtuner0, minor 52
    [    5.831071] registered vtuner misc/vtuner1, minor 51
    [    5.831127] registered vtuner misc/vtuner2, minor 50
    [    5.831201] registered vtuner misc/vtuner3, minor 49
    [    5.831205] HDMI-RX: init
    [    5.831905] HDMI-RX: no device attached
    [    5.831951] HDMI-RX: video format change event
    [    5.831955] HDMI-RX: hdmi packet status stopped
    [    5.831959] HDMI-RX: hdmiInput0 Receiving DVI  format 
    [    5.831963] HDMI-RX: hdmiInput0 Color Space change from '' to ''
    [    5.831986] HDMI-RX: init done
    [    5.831990] bcm_vce_init()
    [    5.831993] bcm_vce_init() 0
    [    5.832386] CI stopped...
    [    5.854572] vice0: allocate output buffers
    [    5.857349] ble init (0)
    [    5.857559] input: dreambox remote control (bluetooth le) as /devices/virtual/input/input3
    [    5.904364] HDMI: SDCD Event
    [    5.969269] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [    9.695139] systemd[1]: Failed to set up the root directory for shared mount propagation: Invalid argument
    [    9.701822] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [    9.702045] systemd[1]: Detected architecture arm.
    [    9.703586] systemd[1]: Set hostname to .
    [    9.833892] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.service is marked executable. Please remove executable permission bits. Proceeding anyway.
    [    9.851140] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.socket is marked executable. Please remove executable permission bits. Proceeding anyway.
    [    9.865449] systemd[1]: Listening on Syslog Socket.
    [    9.865739] systemd[1]: Listening on Journal Socket (/dev/log).
    [    9.865924] systemd[1]: Reached target Swap.
    [    9.867047] systemd[1]: Set up automount data.automount.
    [    9.867113] systemd[1]: Reached target Remote File Systems.
    [    9.867154] systemd[1]: Reached target Paths.
    [    9.867295] systemd[1]: Listening on udev Control Socket.
    [    9.867396] systemd[1]: Listening on udev Kernel Socket.
    [    9.867508] systemd[1]: Listening on Journal Socket.
    [    9.867891] systemd[1]: Created slice User and Session Slice.
    [    9.868059] systemd[1]: Created slice System Slice.
    [    9.869797] systemd[1]: Starting Remount Root and Kernel File Systems...
    [    9.873556] systemd[1]: Starting Load Kernel Modules...
    [    9.875574] systemd[1]: Starting Generate environment for enigma2...
    [    9.876126] systemd[1]: Created slice system-serial\x2dgetty.slice.
    [    9.876298] systemd[1]: Reached target Slices.
    [    9.878748] systemd[1]: Starting Setup Virtual Console...
    [    9.882565] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [    9.888648] systemd[1]: Mounting POSIX Message Queue File System...
    [    9.891820] systemd[1]: Starting Journal Service...
    [    9.913529] systemd[1]: Mounted POSIX Message Queue File System.
    [    9.914568] systemd[1]: Started Remount Root and Kernel File Systems.
    [    9.915117] systemd[1]: Started Setup Virtual Console.
    [    9.926477] systemd[1]: Starting udev Coldplug all Devices...
    [    9.928578] systemd[1]: Starting Load/Save Random Seed...
    [    9.946068] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [    9.947963] systemd[1]: Starting Create Static Device Nodes in /dev...
    [   10.028043] input: dreambox ir keyboard as /devices/virtual/input/input4
    [   10.028306] input: dreambox ir mouse as /devices/virtual/input/input5
    [   10.029738] systemd[1]: Started Load Kernel Modules.
    [   10.031597] systemd[1]: Starting Apply Kernel Variables...
    [   10.047816] systemd[1]: Started Load/Save Random Seed.
    [   10.063671] systemd[1]: Started Apply Kernel Variables.
    [   10.133486] systemd[1]: Started Journal Service.
    [   10.200627] systemd-journald[124]: Received request to flush runtime journal from PID 1
    [   11.152469] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   11.235523] VIDEO0: set blank to 0
    [   11.235688] sync0 is off so we enable it
    [   11.235695] sync0: allocated pcroffset 0
    [   11.235704] sync0: playback!
    [   11.235722] VIDEO0: total delay: 0 (0 ms)
    [   11.240539] VIDEO0: start decode
    [   11.240558] VIDEO0: flush video decoder
    [   11.240565] VIDEO0 got pts failed !!!! (ret 0)
    [   11.258617] VIDEO0: first pts 0x0
    [   11.258635] VIDEO0: EOTF changed to SDR
    [   11.258640] VIDEO0: framerate changed 3
    [   11.258644] VIDEO0: resolution changed (1280 720)
    [   11.258647] VIDEO0: aspect changed 3
    [   11.258762] set current avs auto aspect to 16:9
    [   11.258775] set current avs auto aspect to 16:9
    [   11.258784] HDMI: using SDR eotf
    [   11.258813] set sb to 3(1)
    [   11.397072] VIDEO0: stop decode
    [   11.397088] sync0 1fff no decoder left in sync handling so disable
    [   11.397092] sync0: was last pcroffset0 user so free it
    [   12.257210] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [   12.259336] f0b00000.ethernet: configuring instance for internal PHY
    [   12.259424] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   13.409561] si2183(0): DVB-S(2) voltage disabled now
    [   13.411042] si2183(0): DVB-S(2) voltage disabled now
    [   13.413950] si2183(1): DVB-S(2) voltage disabled now
    [   13.415100] si2183(1): DVB-S(2) voltage disabled now
    [   13.432599] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
    [   13.432712] HDMI: CEC set devtype to 0
    [   13.432722] HDMI: CEC start ... state is now 1
    [   13.432749] HDMI: CEC returned state 1
    [   13.432755] HDMI: CEC state now 801
    [   13.495735] HDMI: CEC use logical address 3
    [   13.495774] HDMI: CEC init completed... state is now 3!
    [   13.564020] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   13.632481] HDMI: CEC send ok!
    [   14.263315] libphy: f0b00000.etherne:01 - Link is Down
    [   14.588480] 0 ms: 
    [   14.621594] 33 ms: 0
    [   14.631391] 10 ms: 0
    [   14.642444] 11 ms: 0
    [   14.965447] 323 ms: 0
    [   15.014219] 49 ms: 3
    [   15.021828] 7 ms: 3
    [   15.022713] 1 ms: 3
    [   15.031905] 9 ms: 3
    [   15.168115] 136 ms: 3
    [   15.195171] 27 ms: 5
    [   15.201068] 5 ms: 5
    [   15.201962] 1 ms: 5
    [   15.202886] 1 ms: 5
    [   15.794750] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
    [   15.794781] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   15.917513] 715 ms: 5
    [   15.918932] 1 ms: 9
    [   16.019352] 101 ms: 9
    [   16.020332] 1 ms: 9
    [   16.078777] 58 ms: 9
    [   16.137534] 59 ms: 9
    [   16.138851] 1 ms: 10
    [   16.143636] 5 ms: 10
    [   16.144782] 1 ms: 10
    [   16.145934] 1 ms: 10
    [   16.154673] 9 ms: 10
    [   16.161665] 7 ms: 10
    [   16.252644] change audioenc bitrate to 256000 bits/s
    [   16.261417] vice0: change videoenc bitrate to 6000000 bits/s
    [   16.261430] change audioenc bitrate to 128000 bits/s
    [   16.274394] vice0: change gop length to 0ms
    [   16.274406] vice0: allow new gop on new scene off
    [   16.274413] vice0: change open gop to off
    [   16.274419] vice0: change p-frames to 4
    [   16.274425] vice0: change b-frames to 2
    [   16.274430] vice0: change to 0 slices per pic
    [   16.274497] vice0: change h264 profile to main
    [   16.274506] vice0: change h264 level to 3.1
    [   16.380498] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
    [   16.404410] 243 ms: 10
    [   16.405506] 1 ms: 11
    [   16.682716] 277 ms: 11
    [   16.833804] 151 ms: 12
    [   16.852033] 18 ms: 14
    [   16.860651] 9 ms: 14
    [   16.861759] 1 ms: 14
    [   16.863373] 2 ms: 15
    [   16.867970] 4 ms: 15
    [   16.869297] 2 ms: 15
    [   16.890241] 21 ms: 15
    [   18.580698] 1690 ms: 15
    [   18.610828] 30 ms: 28
    [   18.611872] 1 ms: 28
    [   18.639335] 28 ms: 28
    [   18.641152] 1 ms: 28
    [   18.642330] 2 ms: 28
    [   18.644864] 2 ms: 28
    [   18.649499] 5 ms: 28
    [   18.658895] 9 ms: 28
    [   18.659899] 1 ms: 28
    [   18.760771] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   18.815256] 156 ms: 28
    [   18.940053] 124 ms: 29
    [   18.943039] set input to 0
    [   18.943047] set fb to 2(-1)
    [   18.943057] set current avs auto aspect to 16:9
    [   18.943085] set sb to 3(1)
    [   18.944054] set ac3 to downmix
    [   18.944719] set ac3plus to use_hdmi_caps
    [   18.946369] HDMI: using SDR eotf
    [   18.946663] HDMI: using SDR eotf
    [   18.946954] using 50.00Hz as MonitorRefreshRate
    [   18.946966] VIDEO1: shared window not available
    [   18.946991] SET FORMAT: display[0], format='2160p50'
    [   18.947000] HDMI mode
    [   18.947005] use EDID to detect colorspace
    [   18.947009] preferred colorspace: Itu_R_BT_2020_NCL
    [   18.947013] using 12bit output
    [   19.068952] VIDEO1: shared window not available
    [   19.068990] set current avs auto aspect to 16:9
    [   19.069012] HDMI: using SDR eotf
    [   19.069032] set sb to 3(1)
    [   19.168928] using 50.00Hz as MonitorRefreshRate
    [   19.168941] VIDEO1: shared window not available
    [   19.168965] SET FORMAT: display[0], format='2160p50'
    [   19.168974] HDMI mode
    [   19.168979] use EDID to detect colorspace
    [   19.168983] preferred colorspace: Itu_R_BT_2020_NCL
    [   19.168987] using 12bit output
    [   19.288954] VIDEO1: shared window not available
    [   19.288994] set current avs auto aspect to 16:9
    [   19.289017] HDMI: using SDR eotf
    [   19.289037] set sb to 3(1)
    [   19.289630] 350 ms: 30
    [   19.296215] 7 ms: 35
    [   19.299841] 3 ms: 35
    [   19.340639] 41 ms: 35
    [   19.347215] 7 ms: 35
    [   23.847303] set ac3plus to hdmi_best
    [   23.847451] set dtshd to hdmi_best
    [   23.847560] set aac to hdmi_best
    [   23.847659] set wmapro to hdmi_best
    [   24.147079] set current avs auto aspect to 16:9
    [   24.147108] set sb to 3(1)
    [   24.147366] set current avs auto aspect to 16:9
    [   24.147389] set sb to 3(1)
    [   24.147489] set current avs auto aspect to 16:9
    [   24.147507] set sb to 3(1)
    [   24.147595] set current avs auto aspect to 16:9
    [   24.147607] set sb to 3(1)
    [   24.168882] set current avs auto aspect to 16:9
    [   24.168931] set sb to 3(1)
    [   24.169149] set current avs auto aspect to 16:9
    [   24.169173] set sb to 3(1)
    [   24.189030] set current avs auto aspect to 16:9
    [   24.189749] set current avs auto aspect to 16:9
    [   24.189866] set current avs auto aspect to 16:9
    [   24.189969] set current avs auto aspect to 16:9
    [   24.190412] set current avs auto aspect to 16:9
    [   24.190484] set current avs auto aspect to 16:9
    [   24.190545] set current avs auto aspect to 16:9
    [   24.190895] set current avs auto aspect to 16:9
    [   24.190982] set current avs auto aspect to 16:9
    [   24.191252] set sb to 3(1)
    [   24.192932] set current avs auto aspect to 16:9
    [   24.192964] set sb to 3(1)
    [   24.193076] set current avs auto aspect to 16:9
    [   24.193102] set sb to 3(1)
    [   24.193382] set current avs auto aspect to 16:9
    [   24.193404] set sb to 3(1)
    [   24.300386] 4953 ms: 35
    [   24.354154] 53 ms: 82
    [   25.108956] set current avs auto aspect to 16:9
    [   25.108988] set sb to 3(1)
    [   25.109102] set current avs auto aspect to 16:9
    [   25.109117] set sb to 3(1)
    [   25.110321] set current avs auto aspect to 16:9
    [   25.110348] set sb to 3(1)
    [   25.110477] set current avs auto aspect to 16:9
    [   25.110493] set sb to 3(1)
    [   25.657731] 1304 ms: 83
    [   26.104637] 447 ms: 96
    [   26.144144] set mute 0 1
    [   26.145345] 41 ms: 99
    [   26.150856] 5 ms: 99
    [   26.424260] si2183(1): DVB-S(2) voltage is 18V now
    [   26.425395] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   26.425608] start PCR0 on dmx 0 pid:17e5 index 2
    [   26.425776] start AUDIO0 on dmx 0 pid:17e6 index 1
    [   26.425782] audio ch0: xpt start
    [   26.425791] audio ch0: reset GA threshold to 8ms
    [   26.425808] sync0 is off so we enable it
    [   26.425814] sync0: allocated pcroffset 0
    [   26.425828] sync0: demux-index 0 pcr pid 17e5
    [   26.425852] sync0: using 2 as pcr pidchannel
    [   26.425915] audio ch0: MPEG
    [   26.425923] audio ch0: streamtype set 0
    [   26.425927] audio ch0: streamtype_set: stop rave
    [   26.425955] audio ch0: add stereo input to mixer DAC
    [   26.425976] audio ch0: add stereo input to mixer SPDIF
    [   26.425993] audio ch0: add stereo input to mixer MAI
    [   26.426006] audio ch0: mai sample rate changed isr (48000)
    [   26.426025] audio ch0: streamtype_set: restart rave
    [   26.426130] audio ch0: decoder start
    [   26.426137] audio ch0: video delay 0 (0 ms)
    [   26.426143] VIDEO0: total delay: 0 (0 ms)
    [   26.427176] start VIDEO0 on dmx 0 pid:17e5 index 2
    [   26.427245] VIDEO0: total delay: 0 (0 ms)
    [   26.432410] VIDEO0: start decode
    [   26.444776] HDMI: CEC returned state 3
    [   26.444786] HDMI: CEC state now 803
    [   26.778822] HDMI: CEC send ok!
    [   26.896012] HDMI: CEC send ok!
    [   27.056769] HDMI: CEC send ok!
    [   27.387878] HDMI: CEC send ok!
    [   27.443515] HDMI: CEC send ok!
    [   27.577256] HDMI: CEC recv ok!
    [   27.714720] HDMI: CEC send ok!
    [   27.746359] si2183(1): start tune freq 1943000, sr 34200000, delsys 6
    [   27.746367] si2183(1): IS_ID 35
    [   27.746373] si2183(1): PLS_MODE 1, PLS_CODE 0
    [   27.746814] si2183(1): PLS Gold code 0 set
    [   27.834380] HDMI: CEC send ok!
    [   27.845349] si2183(1): found carrier after 112 ms
    [   27.902522] HDMI: CEC send ok!
    [   28.036272] HDMI: CEC recv ok!
    [   28.104183] HDMI: CEC send ok!
    [   28.131754] si2183(1): final lock after 398 ms
    [   28.228816] HDMI: CEC send ok!
    [   28.333788] HDMI: CEC recv ok!
    [   28.388538] audio ch0: first pts 0xb126ae26, stc 0xb1269b16, pcr valid
    [   28.397768] HDMI: CEC send ok
    [   28.420525] audio ch0: lock
    [   28.420555] audio ch0: sample rate changed isr (48000)
    [   28.487512] audio ch0: status ready isr
    [   28.518963] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   28.608716] HDMI: CEC recv ok!
    [   28.672722] HDMI: CEC send ok!
    [   28.783211] HDMI: CEC recv ok!
    [   28.847212] HDMI: CEC send ok!
    [   28.915405] HDMI: CEC send ok!
    [   28.955337] VIDEO0: first pts 0xb127f1f0
    [   28.955366] VIDEO0: resolution changed (720 576)
    [   29.016455] HDMI: CEC recv ok!
    [   29.105230] VIDEO0: enable tsm
    [   29.475311] VIDEO0: progressive changed (0)
    [   71.108760] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
    [   71.148587] set current avs auto aspect to 16:9
    [   71.148614] set sb to 3(1)
    [ 1971.182737] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
    [ 1971.222562] set current avs auto aspect to 16:9
    [ 1971.222591] set sb to 3(1)
    root@dm900:
    Grazie ho modificato il post poiche' era troppo lungo..vediamo cosa possiamo fare.
    Dream-Elite Donation - Thanks for your support

    Dream Elite 7

  5. #5
    Newbie
    Join Date
    Dec 2017
    Posts
    12
    Post Thanks / Like
    Rep Power
    0

    Default Re: Migliore DTT usb

    Ottimo, grazie per il lavoro di sviluppo che fate!

  6. #6
    Administrator makaveli's Avatar
    Join Date
    Jul 2016
    Posts
    741
    Post Thanks / Like
    Rep Power
    10

    Default AW: Migliore DTT usb

    Prova a mettere questo file "sms1xxx-hcw-55xxx-dvbt-02.fw" nella cartella /lib/firmware/ con gli diritti 644
    Riavvia e vedi se il tuo USB DVB-T viene riconosciuto
    Attached Files Attached Files
    Dream-Elite Donation - Thanks for your support

  7. #7
    Newbie
    Join Date
    Dec 2017
    Posts
    12
    Post Thanks / Like
    Rep Power
    0

    Default Re: Migliore DTT usb

    Provato ma non me lo vede nella configurazione dei tuner.

  8. #8
    Administrator makaveli's Avatar
    Join Date
    Jul 2016
    Posts
    741
    Post Thanks / Like
    Rep Power
    10

    Default AW: Migliore DTT usb

    Quote Originally Posted by makaveli View Post
    Poi fare dei provi
    Poi attacare la chiavetta e poi lanci gli due commandi
    Code:
    lsusb
    dmesg
    e scrivi qui cosa esce cosi possiamo forse implementare anche la tua chiavetta
    Mi poi mandare di nuovo gli output di queste 2 commandi ?
    GRazie
    Dream-Elite Donation - Thanks for your support

  9. #9
    Newbie
    Join Date
    Dec 2017
    Posts
    12
    Post Thanks / Like
    Rep Power
    0

    Default Re: Migliore DTT usb

    Certamente:
    Code:
    Dream-Elite 2.5.0 dm900
    
    
    dm900 login: root
    Password:
    root@dm900:~# lsusb
    Bus 004 Device 002: ID 2040:c000
    Bus 001 Device 001: ID 1d6b:0002
    Bus 002 Device 001: ID 1d6b:0003
    Bus 003 Device 001: ID 1d6b:0002
    Bus 004 Device 001: ID 1d6b:0002
    Bus 005 Device 001: ID 1d6b:0001
    Bus 006 Device 001: ID 1d6b:0001
    root@dm900:~# dmesg
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.14-1.17-dm900 (jenkins@oe25-dev) (gcc version 5.3.0 (GCC) ) #1 SMP Wed May 15 15:24:07 CEST 2019
    [    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] Machine model: BCM97252SSFF
    [    0.000000] moving dtb from 0x0000000007728000 to 0x0000000000837e70
    [    0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
    [    0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
    [    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] On node 0 totalpages: 524288
    [    0.000000]   Normal zone: 512 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
    [    0.000000]   HighMem zone: 3584 pages used for memmap
    [    0.000000]   HighMem zone: 458752 pages, LIFO batch:31
    [    0.000000] MCP: Enabling write pairing
    [    0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s8384 r8192 d16192 u32768
    [    0.000000] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523776
    [    0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Memory: 1006904K/2097152K available (6114K kernel code, 214K rwdata, 1596K rodata, 244K init, 208K bss, 1073864K reserved, 16384K cma-reserved, 786428K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc078fcec   (7712 kB)
    [    0.000000]       .init : 0xc0790000 - 0xc07cd0c0   ( 245 kB)
    [    0.000000]       .data : 0xc07ce000 - 0xc0803b20   ( 215 kB)
    [    0.000000]        .bss : 0xc0803b28 - 0xc0837e70   ( 209 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Additional per-CPU info printed with stalls.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
    [    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
    [    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
    [    0.000010] Switching to timer-based delay loop
    [    0.000235] Console: colour dummy device 80x30
    [    0.000255] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    [    0.000263] pid_max: default: 32768 minimum: 301
    [    0.000354] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000359] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.005880] Initializing cgroup subsys devices
    [    0.005893] Initializing cgroup subsys freezer
    [    0.005900] Initializing cgroup subsys net_cls
    [    0.005927] CPU: Testing write buffer coherency: ok
    [    0.006143] CPU0: update cpu_power 1024
    [    0.006150] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.006197] Setting up static identity map for 0x5d5ab8 - 0x5d5b10
    [    0.007419] CPU1: Booted secondary processor
    [    0.007438] CPU1: update cpu_power 1024
    [    0.007441] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.007513] Brought up 2 CPUs
    [    0.007524] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    [    0.007529] CPU: All CPU(s) started in SVC mode.
    [    0.007913] devtmpfs: initialized
    [    0.011530] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    [    0.012105] regulator-dummy: no parameters
    [    0.012273] NET: Registered protocol family 16
    [    0.013193] DMA: preallocated 2048 KiB pool for atomic coherent allocations
    [    0.013380] cpuidle: using governor ladder
    [    0.013385] cpuidle: using governor menu
    [    0.014524] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
    [    0.014607] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.016303] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
    [    0.016377] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
    [    0.016444] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
    [    0.016508] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
    [    0.016573] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
    [    0.016639] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
    [    0.016705] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
    [    0.016766] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
    [    0.016830] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
    [    0.016899] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
    [    0.016965] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
    [    0.017027] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
    [    0.017089] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
    [    0.017171] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
    [    0.017477] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.017705] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
    [    0.022043] bio: create slab <bio-0> at 0
    [    0.022349] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022374] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
    [    0.022400] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022413] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
    [    0.022762] SCSI subsystem initialized
    [    0.022863] libata version 3.00 loaded.
    [    0.022979] usbcore: registered new interface driver usbfs
    [    0.023010] usbcore: registered new interface driver hub
    [    0.023068] usbcore: registered new device driver usb
    [    0.023087] media: Linux media interface: v0.10
    [    0.023113] Linux video capture interface: v2.00
    [    0.023161] pps_core: LinuxPPS API ver. 1 registered
    [    0.023166] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    0.023177] PTP clock support registered
    [    0.023395] Advanced Linux Sound Architecture Driver Initialized.
    [    0.023679] Bluetooth: Core ver 2.18
    [    0.023694] NET: Registered protocol family 31
    [    0.023698] Bluetooth: HCI device and connection manager initialized
    [    0.023706] Bluetooth: HCI socket layer initialized
    [    0.023712] Bluetooth: L2CAP socket layer initialized
    [    0.023719] Bluetooth: SCO socket layer initialized
    [    0.024124] Switched to clocksource arch_sys_counter
    [    0.024135] cfg80211: Calling CRDA to update world regulatory domain
    [    0.028512] thermal thermal_zone0: failed to read out thermal zone 0
    [    0.028597] NET: Registered protocol family 2
    [    0.028998] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.029015] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.029037] TCP: Hash tables configured (established 2048 bind 2048)
    [    0.029070] TCP: reno registered
    [    0.029077] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029088] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029222] NET: Registered protocol family 1
    [    0.029449] RPC: Registered named UNIX socket transport module.
    [    0.029454] RPC: Registered udp transport module.
    [    0.029458] RPC: Registered tcp transport module.
    [    0.029461] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.029469] PCI: CLS 0 bytes, default 64
    [    0.030071] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.030417] bounce pool size: 64 pages
    [    0.030942] NFS: Registering the id_resolver key type
    [    0.030975] Key type id_resolver registered
    [    0.030980] Key type id_legacy registered
    [    0.030989] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.031107] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [    0.031416] msgmni has been set to 462
    [    0.032173] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.032180] io scheduler noop registered
    [    0.032199] io scheduler cfq registered (default)
    [    0.032424] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
    [    0.032695] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
    [    0.098391] brcmstb_memc f1102000.memc-ddr: registered
    [    0.098420] brcmstb_memc f1182000.memc-ddr: registered
    [    0.098608] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.099394] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    [    0.100234] loop: module loaded
    [    0.100516] ahci brcmstb-ahci.0: can't get clock
    [    0.100593] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
    [    0.111136] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.111143] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part
    [    0.112911] scsi0 : ahci_platform
    [    0.113160] scsi1 : ahci_platform
    [    0.113288] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    [    0.113293] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    [    0.113783] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
    [    0.113841] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
    [    0.114221] m25p80 spi32766.0: found mx25l25635e, expected m25p80
    [    0.114237] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
    [    0.114256] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
    [    0.114282] 5 ofpart partitions found on MTD device spi32766.0
    [    0.114285] Creating 5 MTD partitions on "spi32766.0":
    [    0.114291] 0x000000000000-0x000000200000 : "flash0.bolt"
    [    0.114791] 0x000000200000-0x000000220000 : "flash0.nvram"
    [    0.115222] 0x000000220000-0x000000240000 : "flash0.devtree"
    [    0.115625] 0x000000240000-0x000001000000 : "flash0.recovery"
    [    0.116019] 0x000000000000-0x000002000000 : "flash0"
    [    0.116725] libphy: Fixed MDIO Bus: probed
    [    0.116846] tun: Universal TUN/TAP device driver, 1.6
    [    0.116849] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.117195] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    [    0.130132] libphy: bcmgenet MII bus: probed
    [    0.151027] xhci-brcm: xHCI BRCM driver
    [    0.151103] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.151149] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    [    0.151436] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    [    0.151569] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.151576] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.151580] usb usb1: Product: xHCI Host Controller
    [    0.151585] usb usb1: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.151589] usb usb1: SerialNumber: f0471000.xhci_v2
    [    0.151919] hub 1-0:1.0: USB hub found
    [    0.151942] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    [    0.152055] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.152065] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    [    0.152212] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
    [    0.152217] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.152221] usb usb2: Product: xHCI Host Controller
    [    0.152225] usb usb2: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.152229] usb usb2: SerialNumber: f0471000.xhci_v2
    [    0.152502] hub 2-0:1.0: USB hub found
    [    0.152524] hub 2-0:1.0: 2 ports detected
    [    0.152835] ehci-brcm: EHCI BRCM driver
    [    0.152906] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    [    0.152923] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    [    0.163039] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    [    0.168126] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.168234] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.168240] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.168244] usb usb3: Product: EHCI Host Controller
    [    0.168248] usb usb3: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.168252] usb usb3: SerialNumber: f0470300.ehci_v2
    [    0.168527] hub 3-0:1.0: USB hub found
    [    0.168549] hub 3-0:1.0: 1 port detected
    [    0.168752] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    [    0.168766] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    [    0.178865] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    [    0.184131] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.184227] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.184233] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.184237] usb usb4: Product: EHCI Host Controller
    [    0.184241] usb usb4: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.184245] usb usb4: SerialNumber: f0470500.ehci_v2
    [    0.184512] hub 4-0:1.0: USB hub found
    [    0.184534] hub 4-0:1.0: 1 port detected
    [    0.184776] ohci-brcm: OHCI BRCM driver
    [    0.184835] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    [    0.184852] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    [    0.184873] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    [    0.239251] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.239256] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.239261] usb usb5: Product: BRCM OHCI controller
    [    0.239265] usb usb5: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.239269] usb usb5: SerialNumber: f0470400.ohci_v2
    [    0.239534] hub 5-0:1.0: USB hub found
    [    0.239555] hub 5-0:1.0: 1 port detected
    [    0.239749] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    [    0.239761] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    [    0.239780] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    [    0.294239] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.294245] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.294249] usb usb6: Product: BRCM OHCI controller
    [    0.294253] usb usb6: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.294257] usb usb6: SerialNumber: f0470600.ohci_v2
    [    0.294529] hub 6-0:1.0: USB hub found
    [    0.294550] hub 6-0:1.0: 1 port detected
    [    0.294792] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.294796] ehci-pci: EHCI PCI platform driver
    [    0.294834] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.294838] ohci-pci: OHCI PCI platform driver
    [    0.294954] usbcore: registered new interface driver usb-storage
    [    0.294960] i2c /dev entries driver
    [    0.295005] lirc_dev: IR Remote Control driver registered, major 250
    [    0.295335] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    [    0.295437] usbcore: registered new interface driver btusb
    [    0.295496] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [    0.295663] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
    [    0.295737] sdhci: Secure Digital Host Controller Interface driver
    [    0.295740] sdhci: Copyright(c) Pierre Ossman
    [    0.295743] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.296842] mmc0: no vqmmc regulator found
    [    0.296847] mmc0: no vmmc regulator found
    [    0.327135] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    [    0.328198] mmc1: no vqmmc regulator found
    [    0.328203] mmc1: no vmmc regulator found
    [    0.360130] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    [    0.360240] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.360322] usbcore: registered new interface driver usbhid
    [    0.360325] usbhid: USB HID core driver
    [    0.360653] TCP: cubic registered
    [    0.360707] NET: Registered protocol family 10
    [    0.361220] NET: Registered protocol family 17
    [    0.361466] Bluetooth: RFCOMM TTY layer initialized
    [    0.361486] Bluetooth: RFCOMM socket layer initialized
    [    0.361490] Bluetooth: RFCOMM ver 1.11
    [    0.361494] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [    0.361498] Bluetooth: BNEP filters: protocol multicast
    [    0.361504] Bluetooth: BNEP socket layer initialized
    [    0.361507] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.361514] Bluetooth: HIDP socket layer initialized
    [    0.361560] l2tp_core: L2TP core driver, V2.0
    [    0.361589] Key type dns_resolver registered
    [    0.361662] Registering SWP/SWPB emulation handler
    [    0.361926] regulator-dummy: disabling
    [    0.362190] ALSA device list:
    [    0.362195]   No soundcards found.
    [    0.362245] Warning: unable to open an initial console.
    [    0.362296] Waiting for root device /dev/mmcblk0p2...
    [    0.486145] usb 4-1: new high-speed USB device number 2 using ehci-brcm
    [    0.500418] mmc0: new high speed SDHC card at address aaaa
    [    0.500618] mmcblk1: mmc0:aaaa SC16G 14.8 GiB
    [    0.502722]  mmcblk1: p1
    [    0.570770] mmc1: BKOPS_EN bit is not set
    [    0.577011] mmc1: new high speed MMC card at address 0001
    [    0.577211] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
    [    0.577305] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
    [    0.577387] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
    [    0.577464] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
    [    0.580339]  mmcblk0: p1 p2 p3
    [    0.582392]  mmcblk0boot1: unknown partition table
    [    0.582871]  mmcblk0boot0: unknown partition table
    [    0.601273] usb 4-1: New USB device found, idVendor=2040, idProduct=c000
    [    0.601279] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    0.601284] usb 4-1: Product: WinTV MiniStick
    [    0.601288] usb 4-1: Manufacturer: Hauppauge Computer Works
    [    0.601293] usb 4-1: SerialNumber: 4035390616
    [    0.670218] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    0.670244] VFS: Mounted root (ext4 filesystem) readonly on device 179:10.
    [    0.671526] devtmpfs: mounted
    [    0.854304] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
    [    0.864725] EXT4-fs (mmcblk1p1): mounted filesystem with journalled data mode. Opts: barrier=1,data=journal
    [    1.044821] stb_core: module license 'Proprietary' taints kernel.
    [    1.044830] Disabling lock debugging due to kernel taint
    [    1.046266] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    1.046510] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    1.102787] bcm7439: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20190312-dm900
    [    1.715415] 1:714298308 SMCB: controller reset timed out
    [    1.911141] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.912292] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
    [    1.912299] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [    1.913548] ata1.00: configured for UDMA/133
    [    1.913777] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 JA0O PQ: 0 ANSI: 5
    [    1.914165] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    1.914172] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    1.914352] sd 0:0:0:0: [sda] Write Protect is off
    [    1.914359] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.914411] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.964408]  sda: sda1
    [    1.964983] sd 0:0:0:0: [sda] Attached SCSI disk
    [    2.024133] ata2: SATA link down (SStatus 0 SControl 300)
    [    2.076970] register adapter
    [    2.077133] register adapter
    [    2.077246] register adapter
    [    2.077360] register adapter
    [    2.077465] register adapter
    [    2.077684] fp: uart recv error 98
    [    2.078155] swd: status is 0, pls check
    [    2.078159] swd: cannot init port
    [    2.078162] ble module not found
    [    2.078263] input: dreambox front panel as /devices/virtual/input/input2
    [    2.078440] OFFSET 1563489657 6894023
    [    2.078444] WKTMR 208772 22563037
    [    2.078447] LAST WKTMR 208765
    [    2.078459] set system time to 1563698430:90911
    [    2.078635] HDMI: CEC start ... state is now 1
    [    2.078768] set input to 0
    [    2.078771] set fb to 2(-1)
    [    2.080189] startvideomode '2160p50' read from /etc/videomode
    [    2.080418] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [    2.114076] HDMI: now powered down
    [    2.148190] HDMI: CEC Physical Addr 1.0.0.0 set from EDID
    [    2.148194] HDMI: EDID read ok
    [    2.148199] HDMI: initial mode set!
    [    2.148205] using 50.00Hz as MonitorRefreshRate
    [    2.148209] SET FORMAT: display[0], format='2160p50'
    [    2.148216] HDMI mode
    [    2.148220] use EDID to detect colorspace
    [    2.148223] preferred colorspace: Itu_R_BT_2020_NCL
    [    2.148227] using 12bit output
    [    2.255232] HDMI: CEC use logical address 3
    [    2.255273] HDMI: CEC init completed... state is now 3!
    [    2.313363] random: nonblocking pool is initialized
    [    2.394535] HDMI: CEC send ok!
    [    2.551361] VIDEO0: enable deinterlacer
    [    2.551472] VIDEO0: set fallback framerate to 60000
    [    2.551482] VIDEO0: set progressive override mode to 1
    [    2.551487] VIDEO0: set streamtype!
    [    2.551493] ->      set MPEG2
    [    2.551495] ->      sw rave disabled!
    [    2.635900] VIDEO1: set fallback framerate to 60000
    [    2.635911] VIDEO1: set progressive override mode to 1
    [    2.635915] VIDEO1: set streamtype!
    [    2.635920] ->      set MPEG2
    [    2.635923] ->      sw rave disabled!
    [    2.671446] VIDEO2: set fallback framerate to 60000
    [    2.671456] VIDEO2: set progressive override mode to 1
    [    2.671459] VIDEO2: set streamtype!
    [    2.671464] ->      set MPEG2
    [    2.671467] ->      sw rave disabled!
    [    2.684418] set ac3 to downmix
    [    2.684433] set wmapro to downmix
    [    2.684442] set ac3plus to use_hdmi_caps
    [    2.684449] set dtshd to force_dts
    [    2.684456] set aac to downmix
    [    2.684789] audio ch2: add stereo (background decoder) input to mixer DUMMY2
    [    2.684830] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
    [    2.685108] DVB: registering new adapter (BCM7439)
    [    2.715595] autodetecting NIMs...
    [    3.226128] Found: Slot 0, ID: 1c (by CA)
    [    3.226134] Initializing adapter 0 (Si2166D-DVB-S2)
    [    3.228139] (NULL device *): DVB: registering adapter 0 frontend 0 (Si2166D)...
    [    3.228232] Initializing adapter 1 (Si2166D-DVB-S2)
    [    3.229282] (NULL device *): DVB: registering adapter 0 frontend 1 (Si2166D)...
    [    3.229649] CI stopped...
    [    3.229718] init ALSA!
    [    3.230019] registered vtuner misc/vtuner0, minor 52
    [    3.230074] registered vtuner misc/vtuner1, minor 51
    [    3.230153] registered vtuner misc/vtuner2, minor 50
    [    3.230216] registered vtuner misc/vtuner3, minor 49
    [    3.230221] HDMI-RX: init
    [    3.230939] HDMI-RX: no device attached
    [    3.230986] HDMI-RX: video format change event
    [    3.230989] HDMI-RX: hdmi packet status stopped
    [    3.230993] HDMI-RX: hdmiInput0 Receiving DVI  format
    [    3.230997] HDMI-RX: hdmiInput0 Color Space change from '' to ''
    [    3.231022] HDMI-RX: init done
    [    3.231026] bcm_vce_init()
    [    3.231029] bcm_vce_init() 0
    [    3.253602] vice0: allocate output buffers
    [    3.256505] ble init (0)
    [    3.256727] input: dreambox remote control (bluetooth le) as /devices/virtual/input/input3
    [    3.309461] HDMI: SDCD Event
    [    3.374772] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   14.154836] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [   14.155073] systemd[1]: Detected architecture arm.
    [   14.156057] systemd[1]: Set hostname to <dm900>.
    [   14.187065] systemd-fstab-generator[108]: Checking was requested for "rootfs", but it is not a device.
    [   14.226574] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.socket is marked executable. Please remove executable permission bits. Proceeding anyway.
    [   14.227210] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.service is marked executable. Please remove executable permission bits. Proceeding anyway.
    [   14.259232] systemd[1]: Listening on Journal Socket.
    [   14.259513] systemd[1]: Listening on Syslog Socket.
    [   14.259563] systemd[1]: Reached target Swap.
    [   14.259675] systemd[1]: Listening on udev Control Socket.
    [   14.259908] systemd[1]: Listening on udev Kernel Socket.
    [   14.259961] systemd[1]: Reached target Paths.
    [   14.260330] systemd[1]: Created slice User and Session Slice.
    [   14.260439] systemd[1]: Listening on Journal Socket (/dev/log).
    [   14.261257] systemd[1]: Set up automount data.automount.
    [   14.261324] systemd[1]: Reached target Remote File Systems.
    [   14.261516] systemd[1]: Created slice System Slice.
    [   14.263067] systemd[1]: Mounting POSIX Message Queue File System...
    [   14.266619] systemd[1]: Starting Load Kernel Modules...
    [   14.267076] systemd[1]: Created slice system-serial\x2dgetty.slice.
    [   14.269405] systemd[1]: Starting Journal Service...
    [   14.272035] systemd[1]: Starting Remount Root and Kernel File Systems...
    [   14.272165] systemd[1]: Reached target Slices.
    [   14.274485] systemd[1]: Starting Generate environment for enigma2...
    [   14.279608] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [   14.282055] systemd[1]: Starting Setup Virtual Console...
    [   14.290396] input: dreambox ir keyboard as /devices/virtual/input/input4
    [   14.291802] input: dreambox ir mouse as /devices/virtual/input/input5
    [   14.301931] systemd[1]: Mounted POSIX Message Queue File System.
    [   14.319257] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
    [   14.319920] systemd[1]: Started Load Kernel Modules.
    [   14.320701] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [   14.321274] systemd[1]: Started Setup Virtual Console.
    [   14.328476] systemd[1]: Started Remount Root and Kernel File Systems.
    [   14.342085] systemd[1]: Starting udev Coldplug all Devices...
    [   14.344270] systemd[1]: Starting Create Static Device Nodes in /dev...
    [   14.346562] systemd[1]: Starting Apply Kernel Variables...
    [   14.352057] systemd[1]: Started Generate environment for enigma2.
    [   14.379972] systemd[1]: Started Create Static Device Nodes in /dev.
    [   14.382428] systemd[1]: Starting udev Kernel Device Manager...
    [   14.382535] systemd[1]: Reached target Local File Systems (Pre).
    [   14.384532] systemd[1]: Mounting /var/volatile...
    [   14.391574] systemd[1]: Mounting /tmp...
    [   14.392879] systemd[1]: Started Apply Kernel Variables.
    [   14.405159] systemd[1]: Mounted /tmp.
    [   14.408711] systemd[1]: Mounted /var/volatile.
    [   14.412615] systemd[1]: Starting Load/Save Random Seed...
    [   14.412741] systemd[1]: Reached target Local File Systems.
    [   14.421798] systemd[1]: Started Journal Service.
    [   14.461165] systemd-journald[114]: Received request to flush runtime journal from PID 1
    [   15.248000] VIDEO0: set blank to 0
    [   15.248386] sync0 is off so we enable it
    [   15.248395] sync0: allocated pcroffset 0
    [   15.248407] sync0: playback!
    [   15.248434] VIDEO0: total delay: 0 (0 ms)
    [   15.253291] VIDEO0: start decode
    [   15.253320] VIDEO0: flush video decoder
    [   15.253331] VIDEO0 got pts failed !!!! (ret 0)
    [   15.280593] VIDEO0: first pts 0x0
    [   15.280620] VIDEO0: EOTF changed to SDR
    [   15.280627] VIDEO0: framerate changed 3
    [   15.280631] VIDEO0: resolution changed (1280 720)
    [   15.280634] VIDEO0: aspect changed 3
    [   15.280806] set current avs auto aspect to 16:9
    [   15.280825] set current avs auto aspect to 16:9
    [   15.280840] HDMI: using SDR eotf
    [   15.280891] set sb to 3(1)
    [   15.362130] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [   15.364977] f0b00000.ethernet: configuring instance for internal PHY
    [   15.365109] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   15.409867] VIDEO0: stop decode
    [   15.409880] sync0 1fff no decoder left in sync handling so disable
    [   15.409885] sync0: was last pcroffset0 user so free it
    [   15.426491] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   16.650112] si2183(0): DVB-S(2) voltage disabled now
    [   16.651708] si2183(0): DVB-S(2) voltage disabled now
    [   16.654010] si2183(1): DVB-S(2) voltage disabled now
    [   16.655290] si2183(1): DVB-S(2) voltage disabled now
    [   16.663448] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
    [   16.663563] HDMI: CEC set devtype to 0
    [   16.663573] HDMI: CEC start ... state is now 1
    [   16.663605] HDMI: CEC returned state 1
    [   16.663612] HDMI: CEC state now 801
    [   16.726501] HDMI: CEC use logical address 3
    [   16.726522] HDMI: CEC init completed... state is now 3!
    [   16.744722] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   16.863307] HDMI: CEC send ok!
    [   17.367242] libphy: f0b00000.etherne:01 - Link is Down
    [   17.536515] 0 ms:
    [   17.569657] 33 ms: 0
    [   17.573212] 4 ms: 0
    [   17.577151] 4 ms: 0
    [   17.836500] 259 ms: 0
    [   17.861914] 25 ms: 2
    [   17.868113] 6 ms: 3
    [   17.869190] 1 ms: 3
    [   17.875855] 6 ms: 3
    [   18.018598] 143 ms: 3
    [   18.040597] 22 ms: 4
    [   18.043720] 3 ms: 5
    [   18.044803] 1 ms: 5
    [   18.045830] 1 ms: 5
    [   18.775307] 730 ms: 5
    [   18.777683] 2 ms: 8
    [   18.817538] 40 ms: 8
    [   18.819671] 2 ms: 9
    [   18.838231] 19 ms: 9
    [   18.886864] 48 ms: 9
    [   18.887981] 1 ms: 9
    [   18.891669] 4 ms: 9
    [   18.892762] 1 ms: 9
    [   18.893946] 1 ms: 9
    [   18.899244] 6 ms: 9
    [   18.904675] 5 ms: 9
    [   18.968230] change audioenc bitrate to 256000 bits/s
    [   18.970385] vice0: change videoenc bitrate to 10000000 bits/s
    [   18.970397] change audioenc bitrate to 448000 bits/s
    [   18.973433] vice0: change gop length to 0ms
    [   18.973444] vice0: allow new gop on new scene off
    [   18.973450] vice0: change open gop to on
    [   18.973456] vice0: change p-frames to 4
    [   18.973461] vice0: change b-frames to 2
    [   18.973466] vice0: change to 0 slices per pic
    [   18.973522] vice0: change h264 profile to high
    [   18.973531] vice0: change h264 level to 3.2
    [   19.063822] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
    [   19.081571] 177 ms: 9
    [   19.082712] 1 ms: 11
    [   19.135356] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
    [   19.135389] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   19.368958] 286 ms: 11
    [   19.559754] 191 ms: 12
    [   19.572387] 13 ms: 13
    [   19.578110] 5 ms: 13
    [   19.579005] 0 ms: 13
    [   19.580403] 2 ms: 13
    [   19.584452] 4 ms: 13
    [   19.585327] 1 ms: 13
    [   19.596413] 11 ms: 13
    [   20.680021] 1083 ms: 13
    [   20.700720] 21 ms: 24
    [   20.701795] 1 ms: 24
    [   20.715344] 14 ms: 24
    [   20.716405] 1 ms: 24
    [   20.717576] 1 ms: 24
    [   20.720195] 3 ms: 24
    [   20.723658] 3 ms: 24
    [   20.731839] 8 ms: 24
    [   20.732938] 1 ms: 24
    [   20.799837] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   20.845731] 113 ms: 24
    [   20.990482] 145 ms: 25
    [   20.995078] set input to 0
    [   20.995089] set fb to 2(-1)
    [   20.995097] set current avs auto aspect to 16:9
    [   20.995164] set sb to 3(1)
    [   20.998290] set ac3 to downmix
    [   20.998835] set ac3plus to use_hdmi_caps
    [   21.002670] HDMI: using SDR eotf
    [   21.002964] HDMI: using SDR eotf
    [   21.005486] using 50.00Hz as MonitorRefreshRate
    [   21.005503] VIDEO1: shared window not available
    [   21.005532] SET FORMAT: display[0], format='2160p50'
    [   21.005545] HDMI mode
    [   21.005549] use EDID to detect colorspace
    [   21.005554] preferred colorspace: Itu_R_BT_2020_NCL
    [   21.005559] using 12bit output
    [   21.134251] VIDEO1: shared window not available
    [   21.134301] set current avs auto aspect to 16:9
    [   21.134324] HDMI: using SDR eotf
    [   21.134901] set sb to 3(1)
    [   21.234210] using 50.00Hz as MonitorRefreshRate
    [   21.234224] VIDEO1: shared window not available
    [   21.234249] SET FORMAT: display[0], format='2160p50'
    [   21.234260] HDMI mode
    [   21.234265] use EDID to detect colorspace
    [   21.234269] preferred colorspace: Itu_R_BT_2020_NCL
    [   21.234273] using 12bit output
    [   21.354232] VIDEO1: shared window not available
    [   21.354265] set current avs auto aspect to 16:9
    [   21.354289] HDMI: using SDR eotf
    [   21.354728] 364 ms: 27
    [   21.356002] set sb to 3(1)
    [   21.358276] 4 ms: 30
    [   21.361839] 3 ms: 30
    [   21.400762] 39 ms: 30
    [   21.404809] 4 ms: 31
    [   26.220911] set ac3plus to hdmi_best
    [   26.221050] set dtshd to hdmi_best
    [   26.221384] set aac to hdmi_best
    [   26.221607] set wmapro to hdmi_best
    [   26.277763] set current avs auto aspect to 16:9
    [   26.277809] set sb to 3(1)
    [   26.279648] set current avs auto aspect to 16:9
    [   26.279687] set sb to 3(1)
    [   26.283420] set current avs auto aspect to 16:9
    [   26.283456] set sb to 3(1)
    [   26.292092] set current avs auto aspect to 16:9
    [   26.292167] set sb to 3(1)
    [   26.293896] set current avs auto aspect to 16:9
    [   26.293925] set sb to 3(1)
    [   26.294035] set current avs auto aspect to 16:9
    [   26.294053] set sb to 3(1)
    [   26.300967] set current avs auto aspect to 16:9
    [   26.301012] set sb to 3(1)
    [   26.305409] set current avs auto aspect to 16:9
    [   26.305444] set sb to 3(1)
    [   26.305865] set current avs auto aspect to 16:9
    [   26.305886] set sb to 3(1)
    [   26.309563] set current avs auto aspect to 16:9
    [   26.309594] set sb to 3(1)
    [   26.309872] set current avs auto aspect to 16:9
    [   26.309891] set sb to 3(1)
    [   26.314494] set current avs auto aspect to 16:9
    [   26.314528] set sb to 3(1)
    [   26.315979] set current avs auto aspect to 16:9
    [   26.316013] set sb to 3(1)
    [   26.316369] set current avs auto aspect to 16:9
    [   26.316396] set sb to 3(1)
    [   26.394112] 4989 ms: 31
    [   26.452481] 58 ms: 81
    [   27.963623] 1511 ms: 82
    [   28.338044] 374 ms: 96
    [   28.359590] set mute 0 1
    [   28.360851] 23 ms: 99
    [   28.366883] 6 ms: 99
    [   28.619735] si2183(1): DVB-S(2) voltage is 13V now
    [   28.621461] start PCR0 on dmx 0 pid:1f8 index 3
    [   28.622076] start AUDIO0 on dmx 0 pid:25c index 1
    [   28.622083] audio ch0: xpt start
    [   28.622095] audio ch0: reset GA threshold to 8ms
    [   28.622147] sync0 is off so we enable it
    [   28.622154] sync0: allocated pcroffset 0
    [   28.622171] sync0: demux-index 0 pcr pid 1f8
    [   28.622185] sync0: using 3 as pcr pidchannel
    [   28.622426] audio ch0: MPEG
    [   28.622435] audio ch0: streamtype set 0
    [   28.622441] audio ch0: streamtype_set: stop rave
    [   28.622473] audio ch0: add stereo input to mixer DAC
    [   28.622496] audio ch0: add stereo input to mixer SPDIF
    [   28.622510] audio ch0: add stereo input to mixer MAI
    [   28.622523] audio ch0: mai sample rate changed isr (48000)
    [   28.622547] audio ch0: streamtype_set: restart rave
    [   28.622969] audio ch0: decoder start
    [   28.622984] audio ch0: video delay 0 (0 ms)
    [   28.622990] VIDEO0: total delay: 0 (0 ms)
    [   28.624166] VIDEO0: set streamtype!
    [   28.624179] ->      set H264
    [   28.624183] ->      sw rave disabled!
    [   28.624201] audio ch0 delay 18000 (200 ms)
    [   28.624207] VIDEO0: total delay: 18000 (200 ms)
    [   28.624601] start VIDEO0 on dmx 0 pid:1f8 index 3
    [   28.624644] VIDEO0: total delay: 18000 (200 ms)
    [   28.632367] VIDEO0: start decode
    [   28.643740] HDMI: CEC returned state 3
    [   28.643750] HDMI: CEC state now 803
    [   29.308408] HDMI: CEC send ok!
    [   29.958208] si2183(1): start tune freq 1166000, sr 29900000, delsys 6
    [   29.986394] HDMI: CEC send ok!
    [   30.057759] si2183(1): found carrier after 112 ms
    [   30.078474] si2183(1): final lock after 133 ms
    [   30.103573] HDMI: CEC send ok!
    [   30.171772] HDMI: CEC send ok!
    [   30.305553] HDMI: CEC recv ok!
    [   30.443032] HDMI: CEC send ok!
    [   30.547169] HDMI: force disconnect!
    [   30.547240] HDMI: now disconnected
    [   30.547247] HDMI: CEC RX stopped, state is now 0
    [   30.596420] HDMI: CEC send ok!
    [   30.637586] HDMI: CEC returned state 0
    [   30.637597] HDMI: CEC state now 800
    [   30.784209] HDMI: CEC send ok!
    [   30.917997] HDMI: CEC recv ok!
    [   31.100878] audio ch0: first pts 0xff61f8f2, stc 0xff61e2f0, pcr valid
    [   31.123229] audio ch0: lock
    [   31.123259] audio ch0: sample rate changed isr (48000)
    [   31.132659] HDMI: CEC recv ok!
    [   31.196665] HDMI: CEC send ok!
    [   31.408196] audio ch0: status ready isr
    [   31.447758] HDMI: CEC send ok!
    [   31.511864] HDMI: CEC recv ok!
    [   31.537288] VIDEO0: first pts 0xff63b2d2
    [   31.537311] VIDEO0: resolution changed (1920 1080)
    [   31.557187] HDMI: now connected
    [   31.594526] HDMI: CEC Physical Addr 1.0.0.0 set from EDID
    [   31.594534] HDMI: EDID read ok
    [   31.594601] using 50.00Hz as MonitorRefreshRate
    [   31.594612] VIDEO1: shared window not available
    [   31.594638] SET FORMAT: display[0], format='2160p50'
    [   31.594647] HDMI mode
    [   31.594651] use EDID to detect colorspace
    [   31.594655] preferred colorspace: Itu_R_BT_2020_NCL
    [   31.594659] using 12bit output
    [   31.677259] VIDEO0: progressive changed (0)
    [   31.735233] VIDEO1: shared window not available
    [   31.735295] set current avs auto aspect to 16:9
    [   31.735328] HDMI: using SDR eotf
    [   31.735343] HDMI: CEC start ... state is now 1
    [   31.735413] VIDEO0: enable tsm
    [   31.735438] HDMI: CEC recv ok!
    [   31.735506] set sb to 3(1)
    [   31.793240] HDMI: CEC returned state 1
    [   31.793250] HDMI: CEC state now 801
    [   31.817652] HDMI: CEC recv ok!
    [   31.891032] HDMI: CEC use logical address 3
    [   31.891056] HDMI: CEC init completed... state is now 3!
    [   31.956847] HDMI: CEC returned state 3
    [   31.956855] HDMI: CEC state now 803
    [   32.027712] HDMI: CEC send ok!
    [   32.176657] HDMI: CEC recv ok!
    [   32.240656] HDMI: CEC send ok!
    [   32.332068] HDMI: CEC recv ok!
    [   32.396085] HDMI: CEC send ok!
    [   32.487146] HDMI: CEC recv ok!
    [   32.598336] HDMI: CEC recv ok!
    [   32.662321] HDMI: CEC send ok!
    [   32.762517] HDMI: CEC recv ok!
    [   32.789790] HDMI: SDCD Event
    [   32.919262] HDMI: CEC send ok!
    [   33.097827] HDMI: CEC send ok!
    [   33.240399] HDMI: CEC send ok!
    [   33.379052] HDMI: CEC recv ok!
    [   33.516547] HDMI: CEC send ok!
    [   33.657199] HDMI: CEC recv ok!
    [   33.745691] HDMI: CEC send ok!
    [   33.834738] HDMI: CEC recv ok!
    [   33.898744] HDMI: CEC send ok!
    [   34.193970] HDMI: CEC recv ok!
    [   34.437563] HDMI: CEC recv ok!
    [   34.713015] HDMI: CEC recv ok!
    [   35.880800] HDMI: CEC recv ok!
    [   39.896290] HDMI: CEC recv ok!
    [   40.009299] HDMI: CEC send ok!
    [   44.806297] HDMI: CEC recv ok!
    [   44.894789] HDMI: CEC send ok!
    [   45.296286] HDMI: CEC recv ok!
    [   45.667289] HDMI: CEC recv ok!
    [   45.731302] HDMI: CEC send ok!
    [   45.820545] HDMI: CEC recv ok!
    [   57.282944] HDMI: CEC recv ok!
    [   57.574943] HDMI: CEC send ok!
    [   57.709940] HDMI: CEC recv ok!
    [   57.773950] HDMI: CEC send ok!
    [   57.980935] HDMI: CEC recv ok!
    [   58.074233] HDMI: CEC recv ok!
    [   63.862734] HDMI: CEC recv ok!
    [   63.935195] HDMI: CEC recv ok!
    [   64.023695] HDMI: CEC send ok!
    [   64.319750] HDMI: CEC recv ok!
    [   64.457244] HDMI: CEC send ok!
    [   64.664204] HDMI: CEC recv ok!
    [   64.777258] HDMI: CEC send ok!

  10. #10
    Newbie
    Join Date
    Dec 2017
    Posts
    12
    Post Thanks / Like
    Rep Power
    0

    Default Re: Migliore DTT usb

    Alla fine ho trovato una chiavetta Mygica t230, dal blue panel compariva fra le compatibili e l'ho presa, ma la mia sorpresa č che anche questa non viene vista.
    Ho aggiunto manualmemte:
    dvb-demod-si2168-02.fw
    dvb-demod-si2168-b40-01.fw
    dvb-tuner-si2158-a20-01.fw
    e permessi 644 poi
    opkg install kernel-module-dvb-usb-cxusb
    ma ancora non me la vede.
    Code:
    Dream-Elite 2.5.0 dm900
    
    
    dm900 login: root
    Password:
    root@dm900:~# lsusb
    Bus 004 Device 002: ID 0572:c688
    Bus 001 Device 001: ID 1d6b:0002
    Bus 002 Device 001: ID 1d6b:0003
    Bus 003 Device 001: ID 1d6b:0002
    Bus 004 Device 001: ID 1d6b:0002
    Bus 005 Device 001: ID 1d6b:0001
    Bus 006 Device 001: ID 1d6b:0001
    root@dm900:~# dmesg | grep dvb
    [   12.606548] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
    [   12.836472] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
    [   12.971923] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
    [   12.972013] usbcore: registered new interface driver dvb_usb_cxusb
    [   15.829720] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
    [   16.016352] si2157 6-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
    [   31.940694] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   33.998953] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    root@dm900:~# dmesg
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.14-1.17-dm900 (weazle@lumen) (gcc version 5.3.0 (GCC) ) #6 SMP Mon Oct 16 17:41:33 CEST 2017
    [    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] Machine model: BCM97252SSFF
    [    0.000000] moving dtb from 0x0000000007728000 to 0x0000000000839e70
    [    0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
    [    0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
    [    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] On node 0 totalpages: 524288
    [    0.000000]   Normal zone: 512 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
    [    0.000000]   HighMem zone: 3584 pages used for memmap
    [    0.000000]   HighMem zone: 458752 pages, LIFO batch:31
    [    0.000000] MCP: Enabling write pairing
    [    0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s8384 r8192 d16192 u32768
    [    0.000000] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523776
    [    0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 roo
    twait rootfstype=ext4 coherent_pool=2M
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Memory: 1006896K/2097152K available (6114K kernel code, 214K rwdata, 1604K rodata, 244K init, 208
    K bss, 1073872K reserved, 16384K cma-reserved, 786428K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc0791cec   (7720 kB)
    [    0.000000]       .init : 0xc0792000 - 0xc07cf0c0   ( 245 kB)
    [    0.000000]       .data : 0xc07d0000 - 0xc0805b20   ( 215 kB)
    [    0.000000]        .bss : 0xc0805b28 - 0xc0839e70   ( 209 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Additional per-CPU info printed with stalls.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
    [    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
    [    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
    [    0.000010] Switching to timer-based delay loop
    [    0.000236] Console: colour dummy device 80x30
    [    0.000256] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27
    000)
    [    0.000264] pid_max: default: 32768 minimum: 301
    [    0.000356] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000361] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.005900] Initializing cgroup subsys devices
    [    0.005915] Initializing cgroup subsys freezer
    [    0.005922] Initializing cgroup subsys net_cls
    [    0.005951] CPU: Testing write buffer coherency: ok
    [    0.006172] CPU0: update cpu_power 1024
    [    0.006179] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.006226] Setting up static identity map for 0x5d5ab8 - 0x5d5b10
    [    0.007464] CPU1: Booted secondary processor
    [    0.007482] CPU1: update cpu_power 1024
    [    0.007485] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.007554] Brought up 2 CPUs
    [    0.007565] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    [    0.007570] CPU: All CPU(s) started in SVC mode.
    [    0.007955] devtmpfs: initialized
    [    0.011548] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    [    0.012124] regulator-dummy: no parameters
    [    0.012297] NET: Registered protocol family 16
    [    0.013216] DMA: preallocated 2048 KiB pool for atomic coherent allocations
    [    0.013404] cpuidle: using governor ladder
    [    0.013409] cpuidle: using governor menu
    [    0.014540] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
    [    0.014623] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.016328] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
    [    0.016403] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
    [    0.016470] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
    [    0.016533] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
    [    0.016595] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
    [    0.016661] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
    [    0.016727] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
    [    0.016791] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
    [    0.016854] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
    [    0.016924] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
    [    0.016990] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
    [    0.017052] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
    [    0.017129] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
    [    0.017194] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
    [    0.017499] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.017724] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
    [    0.022070] bio: create slab <bio-0> at 0
    [    0.022370] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO inter
    rupt support
    [    0.022397] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
    [    0.022424] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO inter
    rupt support
    [    0.022437] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
    [    0.022786] SCSI subsystem initialized
    [    0.022887] libata version 3.00 loaded.
    [    0.023001] usbcore: registered new interface driver usbfs
    [    0.023031] usbcore: registered new interface driver hub
    [    0.023091] usbcore: registered new device driver usb
    [    0.023110] media: Linux media interface: v0.10
    [    0.023136] Linux video capture interface: v2.00
    [    0.023186] pps_core: LinuxPPS API ver. 1 registered
    [    0.023190] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    0.023200] PTP clock support registered
    [    0.023415] Advanced Linux Sound Architecture Driver Initialized.
    [    0.023701] Bluetooth: Core ver 2.18
    [    0.023716] NET: Registered protocol family 31
    [    0.023719] Bluetooth: HCI device and connection manager initialized
    [    0.023727] Bluetooth: HCI socket layer initialized
    [    0.023733] Bluetooth: L2CAP socket layer initialized
    [    0.023740] Bluetooth: SCO socket layer initialized
    [    0.024142] Switched to clocksource arch_sys_counter
    [    0.024151] cfg80211: Calling CRDA to update world regulatory domain
    [    0.028505] thermal thermal_zone0: failed to read out thermal zone 0
    [    0.028587] NET: Registered protocol family 2
    [    0.028988] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.029005] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.029026] TCP: Hash tables configured (established 2048 bind 2048)
    [    0.029060] TCP: reno registered
    [    0.029066] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029078] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029208] NET: Registered protocol family 1
    [    0.029441] RPC: Registered named UNIX socket transport module.
    [    0.029446] RPC: Registered udp transport module.
    [    0.029450] RPC: Registered tcp transport module.
    [    0.029453] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.029460] PCI: CLS 0 bytes, default 64
    [    0.030049] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.030395] bounce pool size: 64 pages
    [    0.030921] NFS: Registering the id_resolver key type
    [    0.030955] Key type id_resolver registered
    [    0.030960] Key type id_legacy registered
    [    0.030970] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.031088] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [    0.031398] msgmni has been set to 462
    [    0.032158] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.032166] io scheduler noop registered
    [    0.032185] io scheduler cfq registered (default)
    [    0.032408] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
    [    0.032679] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
    [    0.098413] brcmstb_memc f1102000.memc-ddr: registered
    [    0.098445] brcmstb_memc f1182000.memc-ddr: registered
    [    0.098631] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.099412] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    [    0.100244] loop: module loaded
    [    0.100524] ahci brcmstb-ahci.0: can't get clock
    [    0.100600] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
    [    0.111154] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.111161] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part
    [    0.112938] scsi0 : ahci_platform
    [    0.113187] scsi1 : ahci_platform
    [    0.113317] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    [    0.113323] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    [    0.113774] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
    [    0.113831] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
    [    0.114297] m25p80 spi32766.0: found mx25l25635e, expected m25p80
    [    0.114315] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
    [    0.114334] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
    [    0.114360] 5 ofpart partitions found on MTD device spi32766.0
    [    0.114364] Creating 5 MTD partitions on "spi32766.0":
    [    0.114371] 0x000000000000-0x000000200000 : "flash0.bolt"
    [    0.114859] 0x000000200000-0x000000220000 : "flash0.nvram"
    [    0.115304] 0x000000220000-0x000000240000 : "flash0.devtree"
    [    0.115701] 0x000000240000-0x000001000000 : "flash0.recovery"
    [    0.116095] 0x000000000000-0x000002000000 : "flash0"
    [    0.116806] libphy: Fixed MDIO Bus: probed
    [    0.116920] tun: Universal TUN/TAP device driver, 1.6
    [    0.116924] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.117274] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    [    0.130141] libphy: bcmgenet MII bus: probed
    [    0.151024] xhci-brcm: xHCI BRCM driver
    [    0.151096] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.151114] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    [    0.151439] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    [    0.151568] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.151574] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.151579] usb usb1: Product: xHCI Host Controller
    [    0.151583] usb usb1: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.151587] usb usb1: SerialNumber: f0471000.xhci_v2
    [    0.151917] hub 1-0:1.0: USB hub found
    [    0.151942] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    [    0.152053] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.152066] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    [    0.152200] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
    [    0.152206] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.152210] usb usb2: Product: xHCI Host Controller
    [    0.152214] usb usb2: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.152218] usb usb2: SerialNumber: f0471000.xhci_v2
    [    0.152497] hub 2-0:1.0: USB hub found
    [    0.152518] hub 2-0:1.0: 2 ports detected
    [    0.152828] ehci-brcm: EHCI BRCM driver
    [    0.152902] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    [    0.152917] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    [    0.163036] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    [    0.168149] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.168262] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.168267] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.168272] usb usb3: Product: EHCI Host Controller
    [    0.168276] usb usb3: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.168280] usb usb3: SerialNumber: f0470300.ehci_v2
    [    0.168552] hub 3-0:1.0: USB hub found
    [    0.168572] hub 3-0:1.0: 1 port detected
    [    0.168774] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    [    0.168788] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    [    0.178883] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    [    0.184147] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.184245] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.184250] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.184254] usb usb4: Product: EHCI Host Controller
    [    0.184258] usb usb4: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.184262] usb usb4: SerialNumber: f0470500.ehci_v2
    [    0.184518] hub 4-0:1.0: USB hub found
    [    0.184540] hub 4-0:1.0: 1 port detected
    [    0.184780] ohci-brcm: OHCI BRCM driver
    [    0.184837] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    [    0.184854] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    [    0.184874] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    [    0.239267] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.239272] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.239277] usb usb5: Product: BRCM OHCI controller
    [    0.239280] usb usb5: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.239284] usb usb5: SerialNumber: f0470400.ohci_v2
    [    0.239543] hub 5-0:1.0: USB hub found
    [    0.239566] hub 5-0:1.0: 1 port detected
    [    0.239762] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    [    0.239775] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    [    0.239795] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    [    0.294256] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.294262] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.294266] usb usb6: Product: BRCM OHCI controller
    [    0.294270] usb usb6: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.294274] usb usb6: SerialNumber: f0470600.ohci_v2
    [    0.294543] hub 6-0:1.0: USB hub found
    [    0.294564] hub 6-0:1.0: 1 port detected
    [    0.294806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.294810] ehci-pci: EHCI PCI platform driver
    [    0.294850] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.294854] ohci-pci: OHCI PCI platform driver
    [    0.294972] usbcore: registered new interface driver usb-storage
    [    0.294978] i2c /dev entries driver
    [    0.295022] lirc_dev: IR Remote Control driver registered, major 250
    [    0.295339] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    [    0.295438] usbcore: registered new interface driver btusb
    [    0.295496] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [    0.295666] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
    [    0.295741] sdhci: Secure Digital Host Controller Interface driver
    [    0.295744] sdhci: Copyright(c) Pierre Ossman
    [    0.295747] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.296844] mmc0: no vqmmc regulator found
    [    0.296850] mmc0: no vmmc regulator found
    [    0.327150] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    [    0.329504] mmc1: no vqmmc regulator found
    [    0.329509] mmc1: no vmmc regulator found
    [    0.361146] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    [    0.361252] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.361334] usbcore: registered new interface driver usbhid
    [    0.361337] usbhid: USB HID core driver
    [    0.361653] TCP: cubic registered
    [    0.361707] NET: Registered protocol family 10
    [    0.362205] NET: Registered protocol family 17
    [    0.362422] Bluetooth: RFCOMM TTY layer initialized
    [    0.362433] Bluetooth: RFCOMM socket layer initialized
    [    0.362437] Bluetooth: RFCOMM ver 1.11
    [    0.362441] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [    0.362444] Bluetooth: BNEP filters: protocol multicast
    [    0.362450] Bluetooth: BNEP socket layer initialized
    [    0.362454] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.362460] Bluetooth: HIDP socket layer initialized
    [    0.362507] l2tp_core: L2TP core driver, V2.0
    [    0.362528] Key type dns_resolver registered
    [    0.362601] Registering SWP/SWPB emulation handler
    [    0.362861] regulator-dummy: disabling
    [    0.363112] ALSA device list:
    [    0.363116]   No soundcards found.
    [    0.363181] Warning: unable to open an initial console.
    [    0.363234] Waiting for root device /dev/mmcblk0p2...
    [    0.494468] mmc0: new high speed SDHC card at address aaaa
    [    0.494672] mmcblk1: mmc0:aaaa SC16G 14.8 GiB
    [    0.496943]  mmcblk1: p1
    [    0.564785] mmc1: BKOPS_EN bit is not set
    [    0.571040] mmc1: new high speed MMC card at address 0001
    [    0.571234] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB
    [    0.571330] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
    [    0.571409] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
    [    0.571486] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
    [    0.574356]  mmcblk0: p1 p2 p3
    [    0.576416]  mmcblk0boot1: unknown partition table
    [    0.576897]  mmcblk0boot0: unknown partition table
    [    0.586172] usb 4-1: new high-speed USB device number 2 using ehci-brcm
    [    0.671221] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    0.671248] VFS: Mounted root (ext4 filesystem) readonly on device 179:10.
    [    0.672065] devtmpfs: mounted
    [    0.700554] usb 4-1: config 1 interface 0 altsetting 0 bulk endpoint 0x86 has invalid maxpacket 188
    [    0.701309] usb 4-1: string descriptor 0 malformed (err = -61), defaulting to 0x0409
    [    0.703672] usb 4-1: New USB device found, idVendor=0572, idProduct=c688
    [    0.703681] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    0.853565] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
    [    1.207181] random: nonblocking pool is initialized
    [    1.859179] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.860329] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
    [    1.860335] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [    1.861580] ata1.00: configured for UDMA/133
    [    1.861804] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 JA0O PQ: 0 ANSI: 5
    [    1.862487] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    1.862495] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    1.862649] sd 0:0:0:0: [sda] Write Protect is off
    [    1.862657] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.862713] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.921357]  sda: sda1
    [    1.922047] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.973156] ata2: SATA link down (SStatus 0 SControl 300)
    [    3.461437] EXT4-fs (mmcblk1p1): recovery complete
    [    3.467742] EXT4-fs (mmcblk1p1): mounted filesystem with journalled data mode. Opts: barrier=1,data=journal
    [    3.645834] stb_core: module license 'Proprietary' taints kernel.
    [    3.645844] Disabling lock debugging due to kernel taint
    [    3.647347] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    3.647587] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    3.663948] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [    3.715261] bcm7439: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20190312-dm900
    [    4.328400] 4:327263918 SMCB: controller reset timed out
    [    4.690467] register adapter
    [    4.690615] register adapter
    [    4.690736] register adapter
    [    4.690846] register adapter
    [    4.690957] register adapter
    [    4.691189] fp: uart recv error 98
    [    4.691646] swd: status is 0, pls check
    [    4.691650] swd: cannot init port
    [    4.691653] ble module not found
    [    4.691759] input: dreambox front panel as /devices/virtual/input/input2
    [    4.691931] OFFSET 1565087275 7763452
    [    4.691936] WKTMR 38976 12735580
    [    4.691939] LAST WKTMR 38966
    [    4.691952] set system time to 1565126251:758464
    [    4.692127] HDMI: CEC start ... state is now 1
    [    4.692273] set input to 0
    [    4.692277] set fb to 2(-1)
    [    4.693678] startvideomode '2160p50' read from /etc/videomode
    [    4.693908] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [    4.727578] HDMI: now connected
    [    4.763787] HDMI: CEC Physical Addr 1.0.0.0 set from EDID
    [    4.763792] HDMI: EDID read ok
    [    4.763795] HDMI: initial mode set!
    [    4.763802] using 50.00Hz as MonitorRefreshRate
    [    4.763806] SET FORMAT: display[0], format='2160p50'
    [    4.763814] HDMI mode
    [    4.763818] use EDID to detect colorspace
    [    4.763821] preferred colorspace: Itu_R_BT_2020_NCL
    [    4.763825] using 12bit output
    [    4.888234] HDMI: CEC use logical address 3
    [    4.888277] HDMI: CEC init completed... state is now 3!
    [    5.027546] HDMI: CEC send ok!
    [    5.184266] VIDEO0: enable deinterlacer
    [    5.184377] VIDEO0: set fallback framerate to 60000
    [    5.184387] VIDEO0: set progressive override mode to 1
    [    5.184392] VIDEO0: set streamtype!
    [    5.184398] ->      set MPEG2
    [    5.184401] ->      sw rave disabled!
    [    5.268815] VIDEO1: set fallback framerate to 60000
    [    5.268826] VIDEO1: set progressive override mode to 1
    [    5.268831] VIDEO1: set streamtype!
    [    5.268836] ->      set MPEG2
    [    5.268839] ->      sw rave disabled!
    [    5.304372] VIDEO2: set fallback framerate to 60000
    [    5.304381] VIDEO2: set progressive override mode to 1
    [    5.304384] VIDEO2: set streamtype!
    [    5.304389] ->      set MPEG2
    [    5.304392] ->      sw rave disabled!
    [    5.317441] set ac3 to downmix
    [    5.317455] set wmapro to downmix
    [    5.317462] set ac3plus to use_hdmi_caps
    [    5.317470] set dtshd to force_dts
    [    5.317476] set aac to downmix
    [    5.317807] audio ch2: add stereo (background decoder) input to mixer DUMMY2
    [    5.317846] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
    [    5.318161] DVB: registering new adapter (BCM7439)
    [    5.348737] autodetecting NIMs...
    [    5.859147] Found: Slot 0, ID: 1c (by CA)
    [    5.859155] Initializing adapter 0 (Si2166D-DVB-S2)
    [    5.868183] (NULL device *): DVB: registering adapter 0 frontend 0 (Si2166D)...
    [    5.868296] Initializing adapter 1 (Si2166D-DVB-S2)
    [    5.870155] (NULL device *): DVB: registering adapter 0 frontend 1 (Si2166D)...
    [    5.870579] init ALSA!
    [    5.870884] registered vtuner misc/vtuner0, minor 52
    [    5.870950] registered vtuner misc/vtuner1, minor 51
    [    5.871010] registered vtuner misc/vtuner2, minor 50
    [    5.871071] registered vtuner misc/vtuner3, minor 49
    [    5.871075] HDMI-RX: init
    [    5.871791] HDMI-RX: no device attached
    [    5.871838] HDMI-RX: video format change event
    [    5.871841] HDMI-RX: hdmi packet status stopped
    [    5.871845] HDMI-RX: hdmiInput0 Receiving DVI  format
    [    5.871848] HDMI-RX: hdmiInput0 Color Space change from '' to ''
    [    5.871872] HDMI-RX: init done
    [    5.871875] bcm_vce_init()
    [    5.871878] bcm_vce_init() 0
    [    5.872279] CI stopped...
    [    5.894534] vice0: allocate output buffers
    [    5.897311] ble init (0)
    [    5.897521] input: dreambox remote control (bluetooth le) as /devices/virtual/input/input3
    [    5.923158] HDMI: SDCD Event
    [    6.013568] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   11.810093] systemd[1]: Failed to set up the root directory for shared mount propagation: Invalid argument
    [   11.823386] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSV
    INIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [   11.823620] systemd[1]: Detected architecture arm.
    [   11.825064] systemd[1]: Set hostname to <dm900>.
    [   11.978859] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.service is marked executable. Pl
    ease remove executable permission bits. Proceeding anyway.
    [   11.995403] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.socket is marked executable. Ple
    ase remove executable permission bits. Proceeding anyway.
    [   12.009376] systemd[1]: Listening on udev Control Socket.
    [   12.009684] systemd[1]: Listening on Journal Socket (/dev/log).
    [   12.009732] systemd[1]: Reached target Swap.
    [   12.009773] systemd[1]: Reached target Remote File Systems.
    [   12.011068] systemd[1]: Set up automount data.automount.
    [   12.011252] systemd[1]: Listening on udev Kernel Socket.
    [   12.011311] systemd[1]: Reached target Paths.
    [   12.011435] systemd[1]: Listening on Journal Socket.
    [   12.011523] systemd[1]: Listening on Syslog Socket.
    [   12.011885] systemd[1]: Created slice System Slice.
    [   12.013529] systemd[1]: Starting Generate environment for enigma2...
    [   12.016809] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [   12.026929] systemd[1]: Starting Load Kernel Modules...
    [   12.027622] systemd[1]: Created slice system-serial\x2dgetty.slice.
    [   12.030275] systemd[1]: Starting Journal Service...
    [   12.030661] systemd[1]: Created slice User and Session Slice.
    [   12.030742] systemd[1]: Reached target Slices.
    [   12.033066] systemd[1]: Mounting POSIX Message Queue File System...
    [   12.035640] systemd[1]: Starting Remount Root and Kernel File Systems...
    [   12.037910] systemd[1]: Starting Setup Virtual Console...
    [   12.098220] systemd[1]: Mounted POSIX Message Queue File System.
    [   12.129059] systemd[1]: Started Remount Root and Kernel File Systems.
    [   12.131125] systemd[1]: Starting Load/Save Random Seed...
    [   12.144419] systemd[1]: Starting udev Coldplug all Devices...
    [   12.145559] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [   12.147819] systemd[1]: Starting Create Static Device Nodes in /dev...
    [   12.162208] systemd[1]: Started Setup Virtual Console.
    [   12.217836] systemd[1]: Started Generate environment for enigma2.
    [   12.218665] systemd[1]: Started Load/Save Random Seed.
    [   12.252845] input: dreambox ir keyboard as /devices/virtual/input/input4
    [   12.253249] input: dreambox ir mouse as /devices/virtual/input/input5
    [   12.254894] systemd[1]: Started Load Kernel Modules.
    [   12.256816] systemd[1]: Starting Apply Kernel Variables...
    [   12.265664] systemd[1]: Started Create Static Device Nodes in /dev.
    [   12.268011] systemd[1]: Starting udev Kernel Device Manager...
    [   12.268087] systemd[1]: Reached target Local File Systems (Pre).
    [   12.268207] systemd[1]: Reached target Local File Systems.
    [   12.298986] systemd[1]: Started Apply Kernel Variables.
    [   12.311664] systemd[1]: Started Journal Service.
    [   12.376966] systemd-journald[117]: Received request to flush runtime journal from PID 1
    [   12.606548] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state.
    [   12.836472] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
    [   12.838631] DVB: registering new adapter (Mygica T230 DVB-T/T2/C)
    [   12.956207] i2c i2c-5: Added multiplexed i2c bus 6
    [   12.956221] si2168 5-0064: Silicon Labs Si2168 successfully attached
    [   12.970769] si2157 6-0060: Silicon Labs Si2147/2148/2157/Si2158 successfully attached
    [   12.970805] usb 4-1: DVB: registering adapter 1 frontend 0 (Silicon Labs Si2168)...
    [   12.971923] dvb-usb: Mygica T230 DVB-T/T2/C successfully initialized and connected.
    [   12.972013] usbcore: registered new interface driver dvb_usb_cxusb
    [   13.350624] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   13.356272] VIDEO0: set blank to 0
    [   13.356445] sync0 is off so we enable it
    [   13.356452] sync0: allocated pcroffset 0
    [   13.356461] sync0: playback!
    [   13.356481] VIDEO0: total delay: 0 (0 ms)
    [   13.361354] VIDEO0: start decode
    [   13.361375] VIDEO0: flush video decoder
    [   13.361382] VIDEO0 got pts failed !!!! (ret 0)
    [   13.377396] VIDEO0: first pts 0x0
    [   13.377417] VIDEO0: EOTF changed to SDR
    [   13.377422] VIDEO0: framerate changed 3
    [   13.377426] VIDEO0: resolution changed (1280 720)
    [   13.377429] VIDEO0: aspect changed 3
    [   13.377551] set current avs auto aspect to 16:9
    [   13.377565] set current avs auto aspect to 16:9
    [   13.377575] HDMI: using SDR eotf
    [   13.377605] set sb to 3(1)
    [   13.517752] VIDEO0: stop decode
    [   13.517767] sync0 1fff no decoder left in sync handling so disable
    [   13.517771] sync0: was last pcroffset0 user so free it
    [   13.689179] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [   13.691621] f0b00000.ethernet: configuring instance for internal PHY
    [   13.691721] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   15.583213] si2183(0): DVB-S(2) voltage disabled now
    [   15.585877] si2183(1): DVB-S(2) voltage disabled now
    [   15.587063] si2183(1): DVB-S(2) voltage disabled now
    [   15.591101] si2183(0): DVB-S(2) voltage disabled now
    [   15.695261] libphy: f0b00000.etherne:01 - Link is Down
    [   15.825043] si2168 5-0064: found a 'Silicon Labs Si2168' in cold state
    [   15.829720] si2168 5-0064: downloading firmware from file 'dvb-demod-si2168-b40-01.fw'
    [   16.003166] si2168 5-0064: firmware download failed=-110
    [   16.012664] si2157 6-0060: found a 'Silicon Labs Si2157/Si2158' in cold state
    [   16.016352] si2157 6-0060: downloading firmware from file 'dvb-tuner-si2158-a20-01.fw'
    [   17.048069] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
    [   17.048095] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   17.376863] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
    [   17.376968] HDMI: CEC set devtype to 0
    [   17.376976] HDMI: CEC start ... state is now 1
    [   17.376996] HDMI: CEC returned state 1
    [   17.377000] HDMI: CEC state now 801
    [   17.439900] HDMI: CEC use logical address 3
    [   17.439919] HDMI: CEC init completed... state is now 3!
    [   17.506941] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   17.576714] HDMI: CEC send ok!
    [   18.556469] 0 ms:
    [   18.589685] 33 ms: 0
    [   18.603429] 14 ms: 0
    [   18.607837] 4 ms: 0
    [   18.952597] 345 ms: 0
    [   18.993971] 41 ms: 3
    [   19.001677] 8 ms: 3
    [   19.003170] 2 ms: 3
    [   19.010780] 7 ms: 3
    [   19.160453] 150 ms: 3
    [   19.188544] 28 ms: 4
    [   19.194660] 6 ms: 4
    [   19.195707] 1 ms: 4
    [   19.196740] 1 ms: 4
    [   20.064228] 868 ms: 4
    [   20.067772] 3 ms: 11
    [   20.209482] 142 ms: 11
    [   20.210725] 1 ms: 11
    [   20.245422] 35 ms: 11
    [   20.303182] 58 ms: 11
    [   20.304121] 0 ms: 12
    [   20.308259] 4 ms: 12
    [   20.308982] 0 ms: 12
    [   20.309939] 1 ms: 12
    [   20.315814] 6 ms: 12
    [   20.323000] 7 ms: 12
    [   20.417655] change audioenc bitrate to 256000 bits/s
    [   20.420047] vice0: change videoenc bitrate to 10000000 bits/s
    [   20.420061] change audioenc bitrate to 448000 bits/s
    [   20.434352] vice0: change gop length to 0ms
    [   20.434365] vice0: allow new gop on new scene off
    [   20.434372] vice0: change open gop to on
    [   20.434378] vice0: change p-frames to 4
    [   20.434383] vice0: change b-frames to 2
    [   20.434389] vice0: change to 0 slices per pic
    [   20.434455] vice0: change h264 profile to main
    [   20.434465] vice0: change h264 level to 3.1
    [   20.542065] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
    [   20.563916] 241 ms: 12
    [   20.565038] 1 ms: 14
    [   20.872923] 308 ms: 14
    [   21.019946] 147 ms: 16
    [   21.025163] 6 ms: 17
    [   21.031248] 6 ms: 17
    [   21.032311] 1 ms: 17
    [   21.033691] 1 ms: 17
    [   21.037329] 4 ms: 17
    [   21.038392] 1 ms: 17
    [   21.057448] 19 ms: 17
    [   22.437095] 1379 ms: 18
    [   22.463243] 27 ms: 31
    [   22.464011] 0 ms: 31
    [   22.481071] 17 ms: 31
    [   22.482278] 2 ms: 31
    [   22.483543] 1 ms: 31
    [   22.486112] 2 ms: 31
    [   22.491240] 6 ms: 31
    [   22.500216] 9 ms: 31
    [   22.501486] 1 ms: 32
    [   22.602765] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   22.659002] 157 ms: 32
    [   22.782552] 124 ms: 33
    [   22.785504] set input to 0
    [   22.785514] set fb to 2(-1)
    [   22.785524] set current avs auto aspect to 16:9
    [   22.785550] set sb to 3(1)
    [   22.786258] set ac3 to downmix
    [   22.786816] set ac3plus to use_hdmi_caps
    [   22.788523] HDMI: using SDR eotf
    [   22.788810] HDMI: using SDR eotf
    [   22.789082] using 50.00Hz as MonitorRefreshRate
    [   22.789095] VIDEO1: shared window not available
    [   22.789123] SET FORMAT: display[0], format='2160p50'
    [   22.789175] HDMI mode
    [   22.789185] use EDID to detect colorspace
    [   22.789196] preferred colorspace: Itu_R_BT_2020_NCL
    [   22.789203] using 12bit output
    [   22.907724] VIDEO1: shared window not available
    [   22.907762] set current avs auto aspect to 16:9
    [   22.907786] HDMI: using SDR eotf
    [   22.907807] set sb to 3(1)
    [   23.007702] using 50.00Hz as MonitorRefreshRate
    [   23.007713] VIDEO1: shared window not available
    [   23.007737] SET FORMAT: display[0], format='2160p50'
    [   23.007747] HDMI mode
    [   23.007751] use EDID to detect colorspace
    [   23.007754] preferred colorspace: Itu_R_BT_2020_NCL
    [   23.007758] using 12bit output
    [   23.127719] VIDEO1: shared window not available
    [   23.127755] set current avs auto aspect to 16:9
    [   23.127774] HDMI: using SDR eotf
    [   23.127795] set sb to 3(1)
    [   23.128475] 346 ms: 34
    [   23.135171] 7 ms: 36
    [   23.138976] 3 ms: 36
    [   23.183651] 45 ms: 37
    [   23.190817] 7 ms: 37
    [   28.383546] set ac3plus to hdmi_best
    [   28.383689] set dtshd to hdmi_best
    [   28.383795] set aac to hdmi_best
    [   28.383893] set wmapro to hdmi_best
    [   28.973867] set current avs auto aspect to 16:9
    [   28.973911] set sb to 3(1)
    [   28.974034] set current avs auto aspect to 16:9
    [   28.974066] set sb to 3(1)
    [   28.974344] set current avs auto aspect to 16:9
    [   28.974369] set sb to 3(1)
    [   28.981243] set current avs auto aspect to 16:9
    [   28.981282] set sb to 3(1)
    [   28.981418] set current avs auto aspect to 16:9
    [   28.981439] set sb to 3(1)
    [   28.981539] set current avs auto aspect to 16:9
    [   28.981555] set sb to 3(1)
    [   28.982648] set current avs auto aspect to 16:9
    [   28.982676] set sb to 3(1)
    [   28.982812] set current avs auto aspect to 16:9
    [   28.982835] set sb to 3(1)
    [   28.982928] set current avs auto aspect to 16:9
    [   28.982946] set sb to 3(1)
    [   28.983986] set current avs auto aspect to 16:9
    [   28.984016] set sb to 3(1)
    [   28.988862] set current avs auto aspect to 16:9
    [   28.988905] set sb to 3(1)
    [   28.995695] set current avs auto aspect to 16:9
    [   28.995730] set sb to 3(1)
    [   28.995884] set current avs auto aspect to 16:9
    [   28.995908] set sb to 3(1)
    [   28.996030] set current avs auto aspect to 16:9
    [   28.996047] set sb to 3(1)
    [   29.086847] 5896 ms: 37
    [   29.094566] 8 ms: 83
    [   30.638006] 1543 ms: 84
    [   31.158615] 521 ms: 96
    [   31.178491] set mute 0 1
    [   31.179660] 21 ms: 99
    [   31.187189] 8 ms: 99
    [   31.935028] si2183(1): DVB-S(2) voltage is 13V now
    [   31.940694] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   31.942204] start PCR0 on dmx 0 pid:4ce index 2
    [   31.942731] start AUDIO0 on dmx 0 pid:4cf index 1
    [   31.942738] audio ch0: xpt start
    [   31.942746] audio ch0: reset GA threshold to 8ms
    [   31.942761] sync0 is off so we enable it
    [   31.942766] sync0: allocated pcroffset 0
    [   31.942777] sync0: demux-index 0 pcr pid 4ce
    [   31.942789] sync0: using 2 as pcr pidchannel
    [   31.942805] audio ch0: AC3
    [   31.942810] audio ch0: streamtype set 1
    [   31.942814] audio ch0: streamtype_set: stop rave
    [   31.942839] audio ch0: decode
    [   31.942844] audio ch0: add stereo input to mixer DAC
    [   31.942863] audio ch0: add stereo input to mixer SPDIF
    [   31.942874] audio ch0: add stereo input to mixer MAI
    [   31.942885] audio ch0: mai sample rate changed isr (48000)
    [   31.942904] audio ch0: streamtype_set: restart rave
    [   31.943001] audio ch0: decoder start
    [   31.943010] audio ch0: video delay 0 (0 ms)
    [   31.943014] VIDEO0: total delay: 0 (0 ms)
    [   31.944404] VIDEO0: set streamtype!
    [   31.944417] ->      set H264
    [   31.944422] ->      sw rave disabled!
    [   31.944437] audio ch0 delay 18000 (200 ms)
    [   31.944441] VIDEO0: total delay: 18000 (200 ms)
    [   31.944677] start VIDEO0 on dmx 0 pid:4ce index 2
    [   31.944712] VIDEO0: total delay: 18000 (200 ms)
    [   31.950024] VIDEO0: start decode
    [   31.956785] HDMI: CEC returned state 3
    [   31.956796] HDMI: CEC state now 803
    [   32.945931] HDMI: CEC send ok!
    [   33.063099] HDMI: CEC send ok!
    [   33.180296] HDMI: CEC send ok!
    [   33.258024] si2183(1): start tune freq 1681000, sr 29900000, delsys 6
    [   33.263501] HDMI: CEC send ok!
    [   33.355729] si2183(1): found carrier after 123 ms
    [   33.377445] si2183(1): final lock after 145 ms
    [   33.492542] HDMI: CEC send ok!
    [   33.626206] HDMI: CEC recv ok!
    [   33.690208] HDMI: CEC send ok!
    [   33.876961] HDMI: CEC send ok!
    [   33.998953] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   34.010824] HDMI: CEC recv ok!
    [   34.074649] HDMI: CEC send ok!
    [   34.142853] HDMI: CEC send ok!
    [   34.211046] HDMI: CEC send ok!
    [   34.279364] HDMI: CEC send ok!
    [   34.347450] HDMI: CEC send ok!
    [   34.415660] HDMI: CEC send ok!
    [   34.522779] HDMI: CEC recv ok!
    [   34.556477] audio ch0: first pts 0x17793a42c, stc 0x177939186, pcr valid
    [   34.586710] audio ch0: lock
    [   34.586741] audio ch0: sample rate changed isr (48000)
    [   34.613307] HDMI: CEC recv ok!
    [   34.747748] HDMI: CEC recv ok!
    [   34.854313] audio ch0: status ready isr
    [   34.854355] audio ch0: dialnorm change isr
    [   34.862493] HDMI: CEC recv ok!
    [   34.926505] HDMI: CEC send ok!
    [   35.065453] HDMI: CEC recv ok!
    [   35.129477] HDMI: CEC send ok!
    [   35.366177] HDMI: CEC recv ok!
    [   35.374115] VIDEO0: first pts 0x177955e64
    [   35.374169] VIDEO0: resolution changed (1920 1080)
    [   35.454205] HDMI: CEC recv ok!
    [   35.524174] VIDEO0: enable tsm
    [   35.575952] HDMI: CEC recv ok!
    [   36.014064] VIDEO0: progressive changed (0)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •