Results 1 to 7 of 7
  1. #1
    Newbie
    Join Date
    Dec 2017
    Posts
    6
    Post Thanks / Like
    Rep Power
    0

    Default Migliore DTT usb

    Ciao, ho visto il grande lavoro che avete fatto sui driver per le periferiche USB dvb-t e devo dire che siete stati magnifici. A questo punto mi chiedevo quale fra i vari tuner vi sentireste di consigliare all'acquisto visto che con i due del nostro principale provider sia con led verde che blu non mi trovo bene e che non ci sono ancora i driver per chiavette con chip siano (sms) come la mia hauppage ministick?

  2. #2
    Administrator makaveli's Avatar
    Join Date
    Jul 2016
    Posts
    737
    Post Thanks / Like
    Rep Power
    10

    Default AW: Migliore DTT usb

    Poi fare dei provi
    Poi attacare la chiavetta e poi lanci gli due commandi
    Code:
    lsusb
    dmesg
    e scrivi qui cosa esce cosi possiamo forse implementare anche la tua chiavetta
    Dream-Elite Donation - Thanks for your support

  3. #3
    Newbie
    Join Date
    Dec 2017
    Posts
    6
    Post Thanks / Like
    Rep Power
    0

    Default Re: Migliore DTT usb

    Eccomi:

    Code:
    root@dm900:~# lsusb
    Bus 004 Device 002: ID 2040:c000
    Bus 001 Device 001: ID 1d6b:0002
    Bus 002 Device 001: ID 1d6b:0003
    Bus 003 Device 001: ID 1d6b:0002
    Bus 004 Device 001: ID 1d6b:0002
    Bus 005 Device 001: ID 1d6b:0001
    Bus 006 Device 001: ID 1d6b:0001
    root@dm900:~# dmesg
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.14-1.17-dm900 (jenkins@oe25-dev) (gcc version 5.3.0 (GCC) ) #1 SMP Wed May 15 15:24:07 CEST 2019
    [    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] Machine model: BCM97252SSFF
    [    0.000000] moving dtb from 0x0000000007728000 to 0x0000000000837e70
    [    0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
    [    0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
    [    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] On node 0 totalpages: 524288
    [    0.000000]   Normal zone: 512 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
    [    0.000000]   HighMem zone: 3584 pages used for memmap
    [    0.000000]   HighMem zone: 458752 pages, LIFO batch:31
    [    0.000000] MCP: Enabling write pairing
    [    0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s8384 r8192 d16192 u32768
    [    0.000000] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523776
    [    0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Memory: 1006904K/2097152K available (6114K kernel code, 214K rwdata, 1596K rodata, 244K init, 208K bss, 1073864K reserved, 16384K cma-reserved, 786428K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc078fcec   (7712 kB)
    [    0.000000]       .init : 0xc0790000 - 0xc07cd0c0   ( 245 kB)
    [    0.000000]       .data : 0xc07ce000 - 0xc0803b20   ( 215 kB)
    [    0.000000]        .bss : 0xc0803b28 - 0xc0837e70   ( 209 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Additional per-CPU info printed with stalls.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
    [    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
    [    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
    [    0.000011] Switching to timer-based delay loop
    [    0.000236] Console: colour dummy device 80x30
    [    0.000255] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    [    0.000264] pid_max: default: 32768 minimum: 301
    [    0.000356] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000361] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.005895] Initializing cgroup subsys devices
    [    0.005912] Initializing cgroup subsys freezer
    [    0.005918] Initializing cgroup subsys net_cls
    [    0.005947] CPU: Testing write buffer coherency: ok
    [    0.006166] CPU0: update cpu_power 1024
    [    0.006174] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.006222] Setting up static identity map for 0x5d5ab8 - 0x5d5b10
    [    0.007460] CPU1: Booted secondary processor
    [    0.007479] CPU1: update cpu_power 1024
    [    0.007481] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.007551] Brought up 2 CPUs
    [    0.007562] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    [    0.007567] CPU: All CPU(s) started in SVC mode.
    [    0.007949] devtmpfs: initialized
    [    0.011569] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    [    0.012140] regulator-dummy: no parameters
    [    0.012316] NET: Registered protocol family 16
    [    0.013243] DMA: preallocated 2048 KiB pool for atomic coherent allocations
    [    0.013431] cpuidle: using governor ladder
    [    0.013436] cpuidle: using governor menu
    [    0.014585] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
    [    0.014671] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.016362] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
    [    0.016437] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
    [    0.016504] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
    [    0.016570] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
    [    0.016633] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
    [    0.016702] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
    [    0.016768] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
    [    0.016831] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
    [    0.016893] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
    [    0.016963] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
    [    0.017029] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
    [    0.017091] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
    [    0.017168] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
    [    0.017234] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
    [    0.017538] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.017766] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
    [    0.022116] bio: create slab  at 0
    [    0.022423] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022450] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
    [    0.022479] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022491] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
    [    0.022838] SCSI subsystem initialized
    [    0.022938] libata version 3.00 loaded.
    [    0.023054] usbcore: registered new interface driver usbfs
    [    0.023084] usbcore: registered new interface driver hub
    [    0.023141] usbcore: registered new device driver usb
    [    0.023173] media: Linux media interface: v0.10
    [    0.023199] Linux video capture interface: v2.00
    [    0.023235] pps_core: LinuxPPS API ver. 1 registered
    [    0.023238] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
    [    0.023249] PTP clock support registered
    [    0.023462] Advanced Linux Sound Architecture Driver Initialized.
    [    0.023746] Bluetooth: Core ver 2.18
    [    0.023761] NET: Registered protocol family 31
    [    0.023764] Bluetooth: HCI device and connection manager initialized
    [    0.023772] Bluetooth: HCI socket layer initialized
    [    0.023779] Bluetooth: L2CAP socket layer initialized
    [    0.023784] Bluetooth: SCO socket layer initialized
    [    0.024190] Switched to clocksource arch_sys_counter
    [    0.024205] cfg80211: Calling CRDA to update world regulatory domain
    [    0.028568] thermal thermal_zone0: failed to read out thermal zone 0
    [    0.028651] NET: Registered protocol family 2
    [    0.029056] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.029073] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.029095] TCP: Hash tables configured (established 2048 bind 2048)
    [    0.029129] TCP: reno registered
    [    0.029136] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029148] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029282] NET: Registered protocol family 1
    [    0.029502] RPC: Registered named UNIX socket transport module.
    [    0.029508] RPC: Registered udp transport module.
    [    0.029511] RPC: Registered tcp transport module.
    [    0.029515] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.029522] PCI: CLS 0 bytes, default 64
    [    0.030112] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.030454] bounce pool size: 64 pages
    [    0.030973] NFS: Registering the id_resolver key type
    [    0.031010] Key type id_resolver registered
    [    0.031015] Key type id_legacy registered
    [    0.031025] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.031146] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [    0.031455] msgmni has been set to 462
    [    0.032217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.032225] io scheduler noop registered
    [    0.032242] io scheduler cfq registered (default)
    [    0.032463] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
    [    0.032737] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
    [    0.098464] brcmstb_memc f1102000.memc-ddr: registered
    [    0.098492] brcmstb_memc f1182000.memc-ddr: registered
    [    0.098678] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.099459] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    [    0.100304] loop: module loaded
    [    0.100580] ahci brcmstb-ahci.0: can't get clock
    [    0.100661] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
    [    0.111204] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.111212] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part 
    [    0.112986] scsi0 : ahci_platform
    [    0.113236] scsi1 : ahci_platform
    [    0.113359] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    [    0.113364] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    [    0.113868] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
    [    0.113927] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
    [    0.114308] m25p80 spi32766.0: found mx25l25635e, expected m25p80
    [    0.114324] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
    [    0.114343] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
    [    0.114368] 5 ofpart partitions found on MTD device spi32766.0
    [    0.114372] Creating 5 MTD partitions on "spi32766.0":
    [    0.114378] 0x000000000000-0x000000200000 : "flash0.bolt"
    [    0.114875] 0x000000200000-0x000000220000 : "flash0.nvram"
    [    0.115301] 0x000000220000-0x000000240000 : "flash0.devtree"
    [    0.115708] 0x000000240000-0x000001000000 : "flash0.recovery"
    [    0.116101] 0x000000000000-0x000002000000 : "flash0"
    [    0.116808] libphy: Fixed MDIO Bus: probed
    [    0.116932] tun: Universal TUN/TAP device driver, 1.6
    [    0.116936] tun: (C) 1999-2004 Max Krasnyansky 
    [    0.117283] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    [    0.130200] libphy: bcmgenet MII bus: probed
    [    0.151080] xhci-brcm: xHCI BRCM driver
    [    0.151152] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.151171] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    [    0.151496] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    [    0.151624] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.151630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.151634] usb usb1: Product: xHCI Host Controller
    [    0.151639] usb usb1: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.151643] usb usb1: SerialNumber: f0471000.xhci_v2
    [    0.151967] hub 1-0:1.0: USB hub found
    [    0.151991] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    [    0.152106] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.152118] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    [    0.152256] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
    [    0.152262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.152266] usb usb2: Product: xHCI Host Controller
    [    0.152270] usb usb2: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.152274] usb usb2: SerialNumber: f0471000.xhci_v2
    [    0.152548] hub 2-0:1.0: USB hub found
    [    0.152569] hub 2-0:1.0: 2 ports detected
    [    0.152879] ehci-brcm: EHCI BRCM driver
    [    0.152955] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    [    0.152969] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    [    0.163081] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    [    0.168196] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.168306] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.168311] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.168316] usb usb3: Product: EHCI Host Controller
    [    0.168319] usb usb3: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.168324] usb usb3: SerialNumber: f0470300.ehci_v2
    [    0.168597] hub 3-0:1.0: USB hub found
    [    0.168619] hub 3-0:1.0: 1 port detected
    [    0.168824] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    [    0.168838] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    [    0.178936] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    [    0.184199] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.184296] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.184301] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.184305] usb usb4: Product: EHCI Host Controller
    [    0.184309] usb usb4: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.184313] usb usb4: SerialNumber: f0470500.ehci_v2
    [    0.184576] hub 4-0:1.0: USB hub found
    [    0.184599] hub 4-0:1.0: 1 port detected
    [    0.184840] ohci-brcm: OHCI BRCM driver
    [    0.184900] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    [    0.184916] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    [    0.184936] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    [    0.239316] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.239322] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.239326] usb usb5: Product: BRCM OHCI controller
    [    0.239330] usb usb5: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.239334] usb usb5: SerialNumber: f0470400.ohci_v2
    [    0.239600] hub 5-0:1.0: USB hub found
    [    0.239622] hub 5-0:1.0: 1 port detected
    [    0.239818] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    [    0.239831] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    [    0.239850] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    [    0.294307] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.294313] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.294317] usb usb6: Product: BRCM OHCI controller
    [    0.294322] usb usb6: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.294326] usb usb6: SerialNumber: f0470600.ohci_v2
    [    0.294596] hub 6-0:1.0: USB hub found
    [    0.294616] hub 6-0:1.0: 1 port detected
    [    0.294863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.294867] ehci-pci: EHCI PCI platform driver
    [    0.294905] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.294909] ohci-pci: OHCI PCI platform driver
    [    0.295025] usbcore: registered new interface driver usb-storage
    [    0.295031] i2c /dev entries driver
    [    0.295075] lirc_dev: IR Remote Control driver registered, major 250 
    [    0.295399] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    [    0.295498] usbcore: registered new interface driver btusb
    [    0.295558] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [    0.295726] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
    [    0.295801] sdhci: Secure Digital Host Controller Interface driver
    [    0.295804] sdhci: Copyright(c) Pierre Ossman
    [    0.295808] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.296901] mmc0: no vqmmc regulator found
    [    0.296907] mmc0: no vmmc regulator found
    [    0.327206] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    [    0.328269] mmc1: no vqmmc regulator found
    [    0.328273] mmc1: no vmmc regulator found
    [    0.358198] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    [    0.358306] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.358392] usbcore: registered new interface driver usbhid
    [    0.358395] usbhid: USB HID core driver
    [    0.358702] TCP: cubic registered
    [    0.358756] NET: Registered protocol family 10
    [    0.359269] NET: Registered protocol family 17
    [    0.359483] Bluetooth: RFCOMM TTY layer initialized
    [    0.359495] Bluetooth: RFCOMM socket layer initialized
    [    0.359498] Bluetooth: RFCOMM ver 1.11
    [    0.359502] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [    0.359505] Bluetooth: BNEP filters: protocol multicast
    [    0.359512] Bluetooth: BNEP socket layer initialized
    [    0.359515] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.359526] Bluetooth: HIDP socket layer initialized
    [    0.359574] l2tp_core: L2TP core driver, V2.0
    [    0.359595] Key type dns_resolver registered
    [    0.359669] Registering SWP/SWPB emulation handler
    [    0.359938] regulator-dummy: disabling
    [    0.360219] ALSA device list:
    [    0.360225]   No soundcards found.
    [    0.360275] Warning: unable to open an initial console.
    [    0.360329] Waiting for root device /dev/mmcblk0p2...
    [    0.486214] usb 4-1: new high-speed USB device number 2 using ehci-brcm
    [    0.495536] mmc0: new high speed SDHC card at address aaaa
    [    0.495739] mmcblk1: mmc0:aaaa SC16G 14.8 GiB 
    [    0.498003]  mmcblk1: p1
    [    0.565838] mmc1: BKOPS_EN bit is not set
    [    0.572078] mmc1: new high speed MMC card at address 0001
    [    0.572284] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB 
    [    0.572381] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
    [    0.572460] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
    [    0.572542] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
    [    0.575401]  mmcblk0: p1 p2 p3
    [    0.577468]  mmcblk0boot1: unknown partition table
    [    0.577937]  mmcblk0boot0: unknown partition table
    [    0.601343] usb 4-1: New USB device found, idVendor=2040, idProduct=c000
    [    0.601350] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    0.601354] usb 4-1: Product: WinTV MiniStick
    [    0.601359] usb 4-1: Manufacturer: Hauppauge Computer Works
    [    0.601363] usb 4-1: SerialNumber: 4035390616
    [    0.668301] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    0.668329] VFS: Mounted root (ext4 filesystem) readonly on device 179:10.
    [    0.669571] devtmpfs: mounted
    [    0.852238] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
    [    1.116530] random: nonblocking pool is initialized
    [    1.861220] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.862375] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
    [    1.862382] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [    1.863628] ata1.00: configured for UDMA/133
    [    1.863862] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 JA0O PQ: 0 ANSI: 5
    [    1.864273] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    1.864287] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    1.864483] sd 0:0:0:0: [sda] Write Protect is off
    [    1.864490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.864543] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.914450]  sda: sda1
    [    1.915043] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.974204] ata2: SATA link down (SStatus 0 SControl 300)
    [    3.444364] EXT4-fs (mmcblk1p1): recovery complete
    [    3.451805] EXT4-fs (mmcblk1p1): mounted filesystem with journalled data mode. Opts: barrier=1,data=journal
    [    3.627316] stb_core: module license 'Proprietary' taints kernel.
    [    3.627325] Disabling lock debugging due to kernel taint
    [    3.628760] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    3.629000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    3.645550] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [    3.696453] bcm7439: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20190312-dm900
    [    4.309454] 4:309266640 SMCB: controller reset timed out
    [    4.671659] register adapter
    [    4.671808] register adapter
    [    4.671924] register adapter
    [    4.672042] register adapter
    [    4.672150] register adapter
    [    4.672394] fp: uart recv error 98
    [    4.672852] swd: status is 0, pls check
    [    4.672856] swd: cannot init port
    [    4.672859] ble module not found
    [    4.672957] input: dreambox front panel as /devices/virtual/input/input2
    [    4.673136] OFFSET 1562222430 7676371
    [    4.673140] WKTMR 883208 12500630
    [    4.673144] LAST WKTMR 883198
    [    4.673157] set system time to 1563105638:746549
    [    4.673347] HDMI: CEC start ... state is now 1
    [    4.673483] set input to 0
    [    4.673488] set fb to 2(-1)
    [    4.674896] startvideomode '2160p50' read from /etc/videomode
    [    4.675121] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [    4.708804] HDMI: now connected
    [    4.744999] HDMI: CEC Physical Addr 1.0.0.0 set from EDID
    [    4.745003] HDMI: EDID read ok
    [    4.745006] HDMI: initial mode set!
    [    4.745013] using 50.00Hz as MonitorRefreshRate
    [    4.745017] SET FORMAT: display[0], format='2160p50'
    [    4.745025] HDMI mode
    [    4.745029] use EDID to detect colorspace
    [    4.745033] preferred colorspace: Itu_R_BT_2020_NCL
    [    4.745037] using 12bit output
    [    4.850300] HDMI: CEC use logical address 3
    [    4.850329] HDMI: CEC init completed... state is now 3!
    [    4.989600] HDMI: CEC send ok!
    [    5.146781] VIDEO0: enable deinterlacer
    [    5.146894] VIDEO0: set fallback framerate to 60000
    [    5.146904] VIDEO0: set progressive override mode to 1
    [    5.146907] VIDEO0: set streamtype!
    [    5.146913] ->      set MPEG2
    [    5.146916] ->      sw rave disabled!
    [    5.231371] VIDEO1: set fallback framerate to 60000
    [    5.231384] VIDEO1: set progressive override mode to 1
    [    5.231389] VIDEO1: set streamtype!
    [    5.231394] ->      set MPEG2
    [    5.231397] ->      sw rave disabled!
    [    5.266918] VIDEO2: set fallback framerate to 60000
    [    5.266928] VIDEO2: set progressive override mode to 1
    [    5.266931] VIDEO2: set streamtype!
    [    5.266936] ->      set MPEG2
    [    5.266939] ->      sw rave disabled!
    [    5.279488] set ac3 to downmix
    [    5.279502] set wmapro to downmix
    [    5.279510] set ac3plus to use_hdmi_caps
    [    5.279517] set dtshd to force_dts
    [    5.279525] set aac to downmix
    [    5.279859] audio ch2: add stereo (background decoder) input to mixer DUMMY2
    [    5.279896] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
    [    5.280214] DVB: registering new adapter (BCM7439)
    [    5.311066] autodetecting NIMs...
    [    5.821197] Found: Slot 0, ID: 1c (by CA)
    [    5.821204] Initializing adapter 0 (Si2166D-DVB-S2)
    [    5.828209] (NULL device *): DVB: registering adapter 0 frontend 0 (Si2166D)...
    [    5.828310] Initializing adapter 1 (Si2166D-DVB-S2)
    [    5.830255] (NULL device *): DVB: registering adapter 0 frontend 1 (Si2166D)...
    [    5.830690] init ALSA!
    [    5.831008] registered vtuner misc/vtuner0, minor 52
    [    5.831071] registered vtuner misc/vtuner1, minor 51
    [    5.831127] registered vtuner misc/vtuner2, minor 50
    [    5.831201] registered vtuner misc/vtuner3, minor 49
    [    5.831205] HDMI-RX: init
    [    5.831905] HDMI-RX: no device attached
    [    5.831951] HDMI-RX: video format change event
    [    5.831955] HDMI-RX: hdmi packet status stopped
    [    5.831959] HDMI-RX: hdmiInput0 Receiving DVI  format 
    [    5.831963] HDMI-RX: hdmiInput0 Color Space change from '' to ''
    [    5.831986] HDMI-RX: init done
    [    5.831990] bcm_vce_init()
    [    5.831993] bcm_vce_init() 0
    [    5.832386] CI stopped...
    [    5.854572] vice0: allocate output buffers
    [    5.857349] ble init (0)
    [    5.857559] input: dreambox remote control (bluetooth le) as /devices/virtual/input/input3
    [    5.904364] HDMI: SDCD Event
    [    5.969269] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [    9.695139] systemd[1]: Failed to set up the root directory for shared mount propagation: Invalid argument
    [    9.701822] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [    9.702045] systemd[1]: Detected architecture arm.
    [    9.703586] systemd[1]: Set hostname to .
    [    9.833892] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.service is marked executable. Please remove executable permission bits. Proceeding anyway.
    [    9.851140] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.socket is marked executable. Please remove executable permission bits. Proceeding anyway.
    [    9.865449] systemd[1]: Listening on Syslog Socket.
    [    9.865739] systemd[1]: Listening on Journal Socket (/dev/log).
    [    9.865924] systemd[1]: Reached target Swap.
    [    9.867047] systemd[1]: Set up automount data.automount.
    [    9.867113] systemd[1]: Reached target Remote File Systems.
    [    9.867154] systemd[1]: Reached target Paths.
    [    9.867295] systemd[1]: Listening on udev Control Socket.
    [    9.867396] systemd[1]: Listening on udev Kernel Socket.
    [    9.867508] systemd[1]: Listening on Journal Socket.
    [    9.867891] systemd[1]: Created slice User and Session Slice.
    [    9.868059] systemd[1]: Created slice System Slice.
    [    9.869797] systemd[1]: Starting Remount Root and Kernel File Systems...
    [    9.873556] systemd[1]: Starting Load Kernel Modules...
    [    9.875574] systemd[1]: Starting Generate environment for enigma2...
    [    9.876126] systemd[1]: Created slice system-serial\x2dgetty.slice.
    [    9.876298] systemd[1]: Reached target Slices.
    [    9.878748] systemd[1]: Starting Setup Virtual Console...
    [    9.882565] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [    9.888648] systemd[1]: Mounting POSIX Message Queue File System...
    [    9.891820] systemd[1]: Starting Journal Service...
    [    9.913529] systemd[1]: Mounted POSIX Message Queue File System.
    [    9.914568] systemd[1]: Started Remount Root and Kernel File Systems.
    [    9.915117] systemd[1]: Started Setup Virtual Console.
    [    9.926477] systemd[1]: Starting udev Coldplug all Devices...
    [    9.928578] systemd[1]: Starting Load/Save Random Seed...
    [    9.946068] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [    9.947963] systemd[1]: Starting Create Static Device Nodes in /dev...
    [   10.028043] input: dreambox ir keyboard as /devices/virtual/input/input4
    [   10.028306] input: dreambox ir mouse as /devices/virtual/input/input5
    [   10.029738] systemd[1]: Started Load Kernel Modules.
    [   10.031597] systemd[1]: Starting Apply Kernel Variables...
    [   10.047816] systemd[1]: Started Load/Save Random Seed.
    [   10.063671] systemd[1]: Started Apply Kernel Variables.
    [   10.133486] systemd[1]: Started Journal Service.
    [   10.200627] systemd-journald[124]: Received request to flush runtime journal from PID 1
    [   11.152469] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   11.235523] VIDEO0: set blank to 0
    [   11.235688] sync0 is off so we enable it
    [   11.235695] sync0: allocated pcroffset 0
    [   11.235704] sync0: playback!
    [   11.235722] VIDEO0: total delay: 0 (0 ms)
    [   11.240539] VIDEO0: start decode
    [   11.240558] VIDEO0: flush video decoder
    [   11.240565] VIDEO0 got pts failed !!!! (ret 0)
    [   11.258617] VIDEO0: first pts 0x0
    [   11.258635] VIDEO0: EOTF changed to SDR
    [   11.258640] VIDEO0: framerate changed 3
    [   11.258644] VIDEO0: resolution changed (1280 720)
    [   11.258647] VIDEO0: aspect changed 3
    [   11.258762] set current avs auto aspect to 16:9
    [   11.258775] set current avs auto aspect to 16:9
    [   11.258784] HDMI: using SDR eotf
    [   11.258813] set sb to 3(1)
    [   11.397072] VIDEO0: stop decode
    [   11.397088] sync0 1fff no decoder left in sync handling so disable
    [   11.397092] sync0: was last pcroffset0 user so free it
    [   12.257210] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [   12.259336] f0b00000.ethernet: configuring instance for internal PHY
    [   12.259424] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   13.409561] si2183(0): DVB-S(2) voltage disabled now
    [   13.411042] si2183(0): DVB-S(2) voltage disabled now
    [   13.413950] si2183(1): DVB-S(2) voltage disabled now
    [   13.415100] si2183(1): DVB-S(2) voltage disabled now
    [   13.432599] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
    [   13.432712] HDMI: CEC set devtype to 0
    [   13.432722] HDMI: CEC start ... state is now 1
    [   13.432749] HDMI: CEC returned state 1
    [   13.432755] HDMI: CEC state now 801
    [   13.495735] HDMI: CEC use logical address 3
    [   13.495774] HDMI: CEC init completed... state is now 3!
    [   13.564020] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   13.632481] HDMI: CEC send ok!
    [   14.263315] libphy: f0b00000.etherne:01 - Link is Down
    [   14.588480] 0 ms: 
    [   14.621594] 33 ms: 0
    [   14.631391] 10 ms: 0
    [   14.642444] 11 ms: 0
    [   14.965447] 323 ms: 0
    [   15.014219] 49 ms: 3
    [   15.021828] 7 ms: 3
    [   15.022713] 1 ms: 3
    [   15.031905] 9 ms: 3
    [   15.168115] 136 ms: 3
    [   15.195171] 27 ms: 5
    [   15.201068] 5 ms: 5
    [   15.201962] 1 ms: 5
    [   15.202886] 1 ms: 5
    [   15.794750] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
    [   15.794781] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   15.917513] 715 ms: 5
    [   15.918932] 1 ms: 9
    [   16.019352] 101 ms: 9
    [   16.020332] 1 ms: 9
    [   16.078777] 58 ms: 9
    [   16.137534] 59 ms: 9
    [   16.138851] 1 ms: 10
    [   16.143636] 5 ms: 10
    [   16.144782] 1 ms: 10
    [   16.145934] 1 ms: 10
    [   16.154673] 9 ms: 10
    [   16.161665] 7 ms: 10
    [   16.252644] change audioenc bitrate to 256000 bits/s
    [   16.261417] vice0: change videoenc bitrate to 6000000 bits/s
    [   16.261430] change audioenc bitrate to 128000 bits/s
    [   16.274394] vice0: change gop length to 0ms
    [   16.274406] vice0: allow new gop on new scene off
    [   16.274413] vice0: change open gop to off
    [   16.274419] vice0: change p-frames to 4
    [   16.274425] vice0: change b-frames to 2
    [   16.274430] vice0: change to 0 slices per pic
    [   16.274497] vice0: change h264 profile to main
    [   16.274506] vice0: change h264 level to 3.1
    [   16.380498] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
    [   16.404410] 243 ms: 10
    [   16.405506] 1 ms: 11
    [   16.682716] 277 ms: 11
    [   16.833804] 151 ms: 12
    [   16.852033] 18 ms: 14
    [   16.860651] 9 ms: 14
    [   16.861759] 1 ms: 14
    [   16.863373] 2 ms: 15
    [   16.867970] 4 ms: 15
    [   16.869297] 2 ms: 15
    [   16.890241] 21 ms: 15
    [   18.580698] 1690 ms: 15
    [   18.610828] 30 ms: 28
    [   18.611872] 1 ms: 28
    [   18.639335] 28 ms: 28
    [   18.641152] 1 ms: 28
    [   18.642330] 2 ms: 28
    [   18.644864] 2 ms: 28
    [   18.649499] 5 ms: 28
    [   18.658895] 9 ms: 28
    [   18.659899] 1 ms: 28
    [   18.760771] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   18.815256] 156 ms: 28
    [   18.940053] 124 ms: 29
    [   18.943039] set input to 0
    [   18.943047] set fb to 2(-1)
    [   18.943057] set current avs auto aspect to 16:9
    [   18.943085] set sb to 3(1)
    [   18.944054] set ac3 to downmix
    [   18.944719] set ac3plus to use_hdmi_caps
    [   18.946369] HDMI: using SDR eotf
    [   18.946663] HDMI: using SDR eotf
    [   18.946954] using 50.00Hz as MonitorRefreshRate
    [   18.946966] VIDEO1: shared window not available
    [   18.946991] SET FORMAT: display[0], format='2160p50'
    [   18.947000] HDMI mode
    [   18.947005] use EDID to detect colorspace
    [   18.947009] preferred colorspace: Itu_R_BT_2020_NCL
    [   18.947013] using 12bit output
    [   19.068952] VIDEO1: shared window not available
    [   19.068990] set current avs auto aspect to 16:9
    [   19.069012] HDMI: using SDR eotf
    [   19.069032] set sb to 3(1)
    [   19.168928] using 50.00Hz as MonitorRefreshRate
    [   19.168941] VIDEO1: shared window not available
    [   19.168965] SET FORMAT: display[0], format='2160p50'
    [   19.168974] HDMI mode
    [   19.168979] use EDID to detect colorspace
    [   19.168983] preferred colorspace: Itu_R_BT_2020_NCL
    [   19.168987] using 12bit output
    [   19.288954] VIDEO1: shared window not available
    [   19.288994] set current avs auto aspect to 16:9
    [   19.289017] HDMI: using SDR eotf
    [   19.289037] set sb to 3(1)
    [   19.289630] 350 ms: 30
    [   19.296215] 7 ms: 35
    [   19.299841] 3 ms: 35
    [   19.340639] 41 ms: 35
    [   19.347215] 7 ms: 35
    [   23.847303] set ac3plus to hdmi_best
    [   23.847451] set dtshd to hdmi_best
    [   23.847560] set aac to hdmi_best
    [   23.847659] set wmapro to hdmi_best
    [   24.147079] set current avs auto aspect to 16:9
    [   24.147108] set sb to 3(1)
    [   24.147366] set current avs auto aspect to 16:9
    [   24.147389] set sb to 3(1)
    [   24.147489] set current avs auto aspect to 16:9
    [   24.147507] set sb to 3(1)
    [   24.147595] set current avs auto aspect to 16:9
    [   24.147607] set sb to 3(1)
    [   24.168882] set current avs auto aspect to 16:9
    [   24.168931] set sb to 3(1)
    [   24.169149] set current avs auto aspect to 16:9
    [   24.169173] set sb to 3(1)
    [   24.189030] set current avs auto aspect to 16:9
    [   24.189749] set current avs auto aspect to 16:9
    [   24.189866] set current avs auto aspect to 16:9
    [   24.189969] set current avs auto aspect to 16:9
    [   24.190412] set current avs auto aspect to 16:9
    [   24.190484] set current avs auto aspect to 16:9
    [   24.190545] set current avs auto aspect to 16:9
    [   24.190895] set current avs auto aspect to 16:9
    [   24.190982] set current avs auto aspect to 16:9
    [   24.191252] set sb to 3(1)
    [   24.192932] set current avs auto aspect to 16:9
    [   24.192964] set sb to 3(1)
    [   24.193076] set current avs auto aspect to 16:9
    [   24.193102] set sb to 3(1)
    [   24.193382] set current avs auto aspect to 16:9
    [   24.193404] set sb to 3(1)
    [   24.300386] 4953 ms: 35
    [   24.354154] 53 ms: 82
    [   25.108956] set current avs auto aspect to 16:9
    [   25.108988] set sb to 3(1)
    [   25.109102] set current avs auto aspect to 16:9
    [   25.109117] set sb to 3(1)
    [   25.110321] set current avs auto aspect to 16:9
    [   25.110348] set sb to 3(1)
    [   25.110477] set current avs auto aspect to 16:9
    [   25.110493] set sb to 3(1)
    [   25.657731] 1304 ms: 83
    [   26.104637] 447 ms: 96
    [   26.144144] set mute 0 1
    [   26.145345] 41 ms: 99
    [   26.150856] 5 ms: 99
    [   26.424260] si2183(1): DVB-S(2) voltage is 18V now
    [   26.425395] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   26.425608] start PCR0 on dmx 0 pid:17e5 index 2
    [   26.425776] start AUDIO0 on dmx 0 pid:17e6 index 1
    [   26.425782] audio ch0: xpt start
    [   26.425791] audio ch0: reset GA threshold to 8ms
    [   26.425808] sync0 is off so we enable it
    [   26.425814] sync0: allocated pcroffset 0
    [   26.425828] sync0: demux-index 0 pcr pid 17e5
    [   26.425852] sync0: using 2 as pcr pidchannel
    [   26.425915] audio ch0: MPEG
    [   26.425923] audio ch0: streamtype set 0
    [   26.425927] audio ch0: streamtype_set: stop rave
    [   26.425955] audio ch0: add stereo input to mixer DAC
    [   26.425976] audio ch0: add stereo input to mixer SPDIF
    [   26.425993] audio ch0: add stereo input to mixer MAI
    [   26.426006] audio ch0: mai sample rate changed isr (48000)
    [   26.426025] audio ch0: streamtype_set: restart rave
    [   26.426130] audio ch0: decoder start
    [   26.426137] audio ch0: video delay 0 (0 ms)
    [   26.426143] VIDEO0: total delay: 0 (0 ms)
    [   26.427176] start VIDEO0 on dmx 0 pid:17e5 index 2
    [   26.427245] VIDEO0: total delay: 0 (0 ms)
    [   26.432410] VIDEO0: start decode
    [   26.444776] HDMI: CEC returned state 3
    [   26.444786] HDMI: CEC state now 803
    [   26.778822] HDMI: CEC send ok!
    [   26.896012] HDMI: CEC send ok!
    [   27.056769] HDMI: CEC send ok!
    [   27.387878] HDMI: CEC send ok!
    [   27.443515] HDMI: CEC send ok!
    [   27.577256] HDMI: CEC recv ok!
    [   27.714720] HDMI: CEC send ok!
    [   27.746359] si2183(1): start tune freq 1943000, sr 34200000, delsys 6
    [   27.746367] si2183(1): IS_ID 35
    [   27.746373] si2183(1): PLS_MODE 1, PLS_CODE 0
    [   27.746814] si2183(1): PLS Gold code 0 set
    [   27.834380] HDMI: CEC send ok!
    [   27.845349] si2183(1): found carrier after 112 ms
    [   27.902522] HDMI: CEC send ok!
    [   28.036272] HDMI: CEC recv ok!
    [   28.104183] HDMI: CEC send ok!
    [   28.131754] si2183(1): final lock after 398 ms
    [   28.228816] HDMI: CEC send ok!
    [   28.333788] HDMI: CEC recv ok!
    [   28.388538] audio ch0: first pts 0xb126ae26, stc 0xb1269b16, pcr valid
    [   28.397768] HDMI: CEC send ok
    [   28.420525] audio ch0: lock
    [   28.420555] audio ch0: sample rate changed isr (48000)
    [   28.487512] audio ch0: status ready isr
    [   28.518963] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   28.608716] HDMI: CEC recv ok!
    [   28.672722] HDMI: CEC send ok!
    [   28.783211] HDMI: CEC recv ok!
    [   28.847212] HDMI: CEC send ok!
    [   28.915405] HDMI: CEC send ok!
    [   28.955337] VIDEO0: first pts 0xb127f1f0
    [   28.955366] VIDEO0: resolution changed (720 576)
    [   29.016455] HDMI: CEC recv ok!
    [   29.105230] VIDEO0: enable tsm
    [   29.475311] VIDEO0: progressive changed (0)
    [   71.108760] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
    [   71.148587] set current avs auto aspect to 16:9
    [   71.148614] set sb to 3(1)
    [ 1971.182737] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
    [ 1971.222562] set current avs auto aspect to 16:9
    [ 1971.222591] set sb to 3(1)
    root@dm900:

  4. #4
    Administrator deskjet's Avatar
    Join Date
    Jan 2014
    Location
    Calabria
    Posts
    1,818
    Post Thanks / Like
    Rep Power
    10

    Default Re: Migliore DTT usb

    Quote Originally Posted by SonnyRed View Post
    Eccomi:

    Code:
    root@dm900:~# lsusb
    Bus 004 Device 002: ID 2040:c000
    Bus 001 Device 001: ID 1d6b:0002
    Bus 002 Device 001: ID 1d6b:0003
    Bus 003 Device 001: ID 1d6b:0002
    Bus 004 Device 001: ID 1d6b:0002
    Bus 005 Device 001: ID 1d6b:0001
    Bus 006 Device 001: ID 1d6b:0001
    root@dm900:~# dmesg
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.14-1.17-dm900 (jenkins@oe25-dev) (gcc version 5.3.0 (GCC) ) #1 SMP Wed May 15 15:24:07 CEST 2019
    [    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] Machine model: BCM97252SSFF
    [    0.000000] moving dtb from 0x0000000007728000 to 0x0000000000837e70
    [    0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
    [    0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
    [    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] On node 0 totalpages: 524288
    [    0.000000]   Normal zone: 512 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
    [    0.000000]   HighMem zone: 3584 pages used for memmap
    [    0.000000]   HighMem zone: 458752 pages, LIFO batch:31
    [    0.000000] MCP: Enabling write pairing
    [    0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s8384 r8192 d16192 u32768
    [    0.000000] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523776
    [    0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Memory: 1006904K/2097152K available (6114K kernel code, 214K rwdata, 1596K rodata, 244K init, 208K bss, 1073864K reserved, 16384K cma-reserved, 786428K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc078fcec   (7712 kB)
    [    0.000000]       .init : 0xc0790000 - 0xc07cd0c0   ( 245 kB)
    [    0.000000]       .data : 0xc07ce000 - 0xc0803b20   ( 215 kB)
    [    0.000000]        .bss : 0xc0803b28 - 0xc0837e70   ( 209 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Additional per-CPU info printed with stalls.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
    [    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
    [    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
    [    0.000011] Switching to timer-based delay loop
    [    0.000236] Console: colour dummy device 80x30
    [    0.000255] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    [    0.000264] pid_max: default: 32768 minimum: 301
    [    0.000356] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000361] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.005895] Initializing cgroup subsys devices
    [    0.005912] Initializing cgroup subsys freezer
    [    0.005918] Initializing cgroup subsys net_cls
    [    0.005947] CPU: Testing write buffer coherency: ok
    [    0.006166] CPU0: update cpu_power 1024
    [    0.006174] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.006222] Setting up static identity map for 0x5d5ab8 - 0x5d5b10
    [    0.007460] CPU1: Booted secondary processor
    [    0.007479] CPU1: update cpu_power 1024
    [    0.007481] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.007551] Brought up 2 CPUs
    [    0.007562] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    [    0.007567] CPU: All CPU(s) started in SVC mode.
    [    0.007949] devtmpfs: initialized
    [    0.011569] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    [    0.012140] regulator-dummy: no parameters
    [    0.012316] NET: Registered protocol family 16
    [    0.013243] DMA: preallocated 2048 KiB pool for atomic coherent allocations
    [    0.013431] cpuidle: using governor ladder
    [    0.013436] cpuidle: using governor menu
    [    0.014585] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
    [    0.014671] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.016362] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
    [    0.016437] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
    [    0.016504] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
    [    0.016570] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
    [    0.016633] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
    [    0.016702] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
    [    0.016768] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
    [    0.016831] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
    [    0.016893] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
    [    0.016963] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
    [    0.017029] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
    [    0.017091] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
    [    0.017168] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
    [    0.017234] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
    [    0.017538] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.017766] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
    [    0.022116] bio: create slab  at 0
    [    0.022423] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022450] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
    [    0.022479] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022491] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
    [    0.022838] SCSI subsystem initialized
    [    0.022938] libata version 3.00 loaded.
    [    0.023054] usbcore: registered new interface driver usbfs
    [    0.023084] usbcore: registered new interface driver hub
    [    0.023141] usbcore: registered new device driver usb
    [    0.023173] media: Linux media interface: v0.10
    [    0.023199] Linux video capture interface: v2.00
    [    0.023235] pps_core: LinuxPPS API ver. 1 registered
    [    0.023238] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
    [    0.023249] PTP clock support registered
    [    0.023462] Advanced Linux Sound Architecture Driver Initialized.
    [    0.023746] Bluetooth: Core ver 2.18
    [    0.023761] NET: Registered protocol family 31
    [    0.023764] Bluetooth: HCI device and connection manager initialized
    [    0.023772] Bluetooth: HCI socket layer initialized
    [    0.023779] Bluetooth: L2CAP socket layer initialized
    [    0.023784] Bluetooth: SCO socket layer initialized
    [    0.024190] Switched to clocksource arch_sys_counter
    [    0.024205] cfg80211: Calling CRDA to update world regulatory domain
    [    0.028568] thermal thermal_zone0: failed to read out thermal zone 0
    [    0.028651] NET: Registered protocol family 2
    [    0.029056] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.029073] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.029095] TCP: Hash tables configured (established 2048 bind 2048)
    [    0.029129] TCP: reno registered
    [    0.029136] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029148] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029282] NET: Registered protocol family 1
    [    0.029502] RPC: Registered named UNIX socket transport module.
    [    0.029508] RPC: Registered udp transport module.
    [    0.029511] RPC: Registered tcp transport module.
    [    0.029515] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.029522] PCI: CLS 0 bytes, default 64
    [    0.030112] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.030454] bounce pool size: 64 pages
    [    0.030973] NFS: Registering the id_resolver key type
    [    0.031010] Key type id_resolver registered
    [    0.031015] Key type id_legacy registered
    [    0.031025] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.031146] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [    0.031455] msgmni has been set to 462
    [    0.032217] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.032225] io scheduler noop registered
    [    0.032242] io scheduler cfq registered (default)
    [    0.032463] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
    [    0.032737] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
    [    0.098464] brcmstb_memc f1102000.memc-ddr: registered
    [    0.098492] brcmstb_memc f1182000.memc-ddr: registered
    [    0.098678] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.099459] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    [    0.100304] loop: module loaded
    [    0.100580] ahci brcmstb-ahci.0: can't get clock
    [    0.100661] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
    [    0.111204] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.111212] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part 
    [    0.112986] scsi0 : ahci_platform
    [    0.113236] scsi1 : ahci_platform
    [    0.113359] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    [    0.113364] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    [    0.113868] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
    [    0.113927] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
    [    0.114308] m25p80 spi32766.0: found mx25l25635e, expected m25p80
    [    0.114324] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
    [    0.114343] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
    [    0.114368] 5 ofpart partitions found on MTD device spi32766.0
    [    0.114372] Creating 5 MTD partitions on "spi32766.0":
    [    0.114378] 0x000000000000-0x000000200000 : "flash0.bolt"
    [    0.114875] 0x000000200000-0x000000220000 : "flash0.nvram"
    [    0.115301] 0x000000220000-0x000000240000 : "flash0.devtree"
    [    0.115708] 0x000000240000-0x000001000000 : "flash0.recovery"
    [    0.116101] 0x000000000000-0x000002000000 : "flash0"
    [    0.116808] libphy: Fixed MDIO Bus: probed
    [    0.116932] tun: Universal TUN/TAP device driver, 1.6
    [    0.116936] tun: (C) 1999-2004 Max Krasnyansky 
    [    0.117283] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    [    0.130200] libphy: bcmgenet MII bus: probed
    [    0.151080] xhci-brcm: xHCI BRCM driver
    [    0.151152] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.151171] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    [    0.151496] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    [    0.151624] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.151630] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.151634] usb usb1: Product: xHCI Host Controller
    [    0.151639] usb usb1: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.151643] usb usb1: SerialNumber: f0471000.xhci_v2
    [    0.151967] hub 1-0:1.0: USB hub found
    [    0.151991] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    [    0.152106] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.152118] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    [    0.152256] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
    [    0.152262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.152266] usb usb2: Product: xHCI Host Controller
    [    0.152270] usb usb2: Manufacturer: Linux 3.14-1.17-dm900 xhci-hcd
    [    0.152274] usb usb2: SerialNumber: f0471000.xhci_v2
    [    0.152548] hub 2-0:1.0: USB hub found
    [    0.152569] hub 2-0:1.0: 2 ports detected
    [    0.152879] ehci-brcm: EHCI BRCM driver
    [    0.152955] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    [    0.152969] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    [    0.163081] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    [    0.168196] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.168306] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.168311] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.168316] usb usb3: Product: EHCI Host Controller
    [    0.168319] usb usb3: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.168324] usb usb3: SerialNumber: f0470300.ehci_v2
    [    0.168597] hub 3-0:1.0: USB hub found
    [    0.168619] hub 3-0:1.0: 1 port detected
    [    0.168824] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    [    0.168838] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    [    0.178936] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    [    0.184199] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.184296] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.184301] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.184305] usb usb4: Product: EHCI Host Controller
    [    0.184309] usb usb4: Manufacturer: Linux 3.14-1.17-dm900 ehci_hcd
    [    0.184313] usb usb4: SerialNumber: f0470500.ehci_v2
    [    0.184576] hub 4-0:1.0: USB hub found
    [    0.184599] hub 4-0:1.0: 1 port detected
    [    0.184840] ohci-brcm: OHCI BRCM driver
    [    0.184900] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    [    0.184916] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    [    0.184936] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    [    0.239316] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.239322] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.239326] usb usb5: Product: BRCM OHCI controller
    [    0.239330] usb usb5: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.239334] usb usb5: SerialNumber: f0470400.ohci_v2
    [    0.239600] hub 5-0:1.0: USB hub found
    [    0.239622] hub 5-0:1.0: 1 port detected
    [    0.239818] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    [    0.239831] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    [    0.239850] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    [    0.294307] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.294313] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.294317] usb usb6: Product: BRCM OHCI controller
    [    0.294322] usb usb6: Manufacturer: Linux 3.14-1.17-dm900 ohci_hcd
    [    0.294326] usb usb6: SerialNumber: f0470600.ohci_v2
    [    0.294596] hub 6-0:1.0: USB hub found
    [    0.294616] hub 6-0:1.0: 1 port detected
    [    0.294863] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.294867] ehci-pci: EHCI PCI platform driver
    [    0.294905] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.294909] ohci-pci: OHCI PCI platform driver
    [    0.295025] usbcore: registered new interface driver usb-storage
    [    0.295031] i2c /dev entries driver
    [    0.295075] lirc_dev: IR Remote Control driver registered, major 250 
    [    0.295399] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    [    0.295498] usbcore: registered new interface driver btusb
    [    0.295558] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [    0.295726] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
    [    0.295801] sdhci: Secure Digital Host Controller Interface driver
    [    0.295804] sdhci: Copyright(c) Pierre Ossman
    [    0.295808] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.296901] mmc0: no vqmmc regulator found
    [    0.296907] mmc0: no vmmc regulator found
    [    0.327206] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    [    0.328269] mmc1: no vqmmc regulator found
    [    0.328273] mmc1: no vmmc regulator found
    [    0.358198] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    [    0.358306] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.358392] usbcore: registered new interface driver usbhid
    [    0.358395] usbhid: USB HID core driver
    [    0.358702] TCP: cubic registered
    [    0.358756] NET: Registered protocol family 10
    [    0.359269] NET: Registered protocol family 17
    [    0.359483] Bluetooth: RFCOMM TTY layer initialized
    [    0.359495] Bluetooth: RFCOMM socket layer initialized
    [    0.359498] Bluetooth: RFCOMM ver 1.11
    [    0.359502] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [    0.359505] Bluetooth: BNEP filters: protocol multicast
    [    0.359512] Bluetooth: BNEP socket layer initialized
    [    0.359515] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.359526] Bluetooth: HIDP socket layer initialized
    [    0.359574] l2tp_core: L2TP core driver, V2.0
    [    0.359595] Key type dns_resolver registered
    [    0.359669] Registering SWP/SWPB emulation handler
    [    0.359938] regulator-dummy: disabling
    [    0.360219] ALSA device list:
    [    0.360225]   No soundcards found.
    [    0.360275] Warning: unable to open an initial console.
    [    0.360329] Waiting for root device /dev/mmcblk0p2...
    [    0.486214] usb 4-1: new high-speed USB device number 2 using ehci-brcm
    [    0.495536] mmc0: new high speed SDHC card at address aaaa
    [    0.495739] mmcblk1: mmc0:aaaa SC16G 14.8 GiB 
    [    0.498003]  mmcblk1: p1
    [    0.565838] mmc1: BKOPS_EN bit is not set
    [    0.572078] mmc1: new high speed MMC card at address 0001
    [    0.572284] mmcblk0: mmc1:0001 4FPD3R 3.64 GiB 
    [    0.572381] mmcblk0boot0: mmc1:0001 4FPD3R partition 1 4.00 MiB
    [    0.572460] mmcblk0boot1: mmc1:0001 4FPD3R partition 2 4.00 MiB
    [    0.572542] mmcblk0rpmb: mmc1:0001 4FPD3R partition 3 512 KiB
    [    0.575401]  mmcblk0: p1 p2 p3
    [    0.577468]  mmcblk0boot1: unknown partition table
    [    0.577937]  mmcblk0boot0: unknown partition table
    [    0.601343] usb 4-1: New USB device found, idVendor=2040, idProduct=c000
    [    0.601350] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    0.601354] usb 4-1: Product: WinTV MiniStick
    [    0.601359] usb 4-1: Manufacturer: Hauppauge Computer Works
    [    0.601363] usb 4-1: SerialNumber: 4035390616
    [    0.668301] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    0.668329] VFS: Mounted root (ext4 filesystem) readonly on device 179:10.
    [    0.669571] devtmpfs: mounted
    [    0.852238] EXT4-fs: Warning: mounting with data=journal disables delayed allocation and O_DIRECT support!
    [    1.116530] random: nonblocking pool is initialized
    [    1.861220] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    1.862375] ata1.00: ATA-8: HGST HTS541010A9E680, JA0OA560, max UDMA/133
    [    1.862382] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [    1.863628] ata1.00: configured for UDMA/133
    [    1.863862] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS541010A9 JA0O PQ: 0 ANSI: 5
    [    1.864273] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [    1.864287] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    1.864483] sd 0:0:0:0: [sda] Write Protect is off
    [    1.864490] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    1.864543] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    1.914450]  sda: sda1
    [    1.915043] sd 0:0:0:0: [sda] Attached SCSI disk
    [    1.974204] ata2: SATA link down (SStatus 0 SControl 300)
    [    3.444364] EXT4-fs (mmcblk1p1): recovery complete
    [    3.451805] EXT4-fs (mmcblk1p1): mounted filesystem with journalled data mode. Opts: barrier=1,data=journal
    [    3.627316] stb_core: module license 'Proprietary' taints kernel.
    [    3.627325] Disabling lock debugging due to kernel taint
    [    3.628760] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    3.629000] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    3.645550] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
    [    3.696453] bcm7439: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20190312-dm900
    [    4.309454] 4:309266640 SMCB: controller reset timed out
    [    4.671659] register adapter
    [    4.671808] register adapter
    [    4.671924] register adapter
    [    4.672042] register adapter
    [    4.672150] register adapter
    [    4.672394] fp: uart recv error 98
    [    4.672852] swd: status is 0, pls check
    [    4.672856] swd: cannot init port
    [    4.672859] ble module not found
    [    4.672957] input: dreambox front panel as /devices/virtual/input/input2
    [    4.673136] OFFSET 1562222430 7676371
    [    4.673140] WKTMR 883208 12500630
    [    4.673144] LAST WKTMR 883198
    [    4.673157] set system time to 1563105638:746549
    [    4.673347] HDMI: CEC start ... state is now 1
    [    4.673483] set input to 0
    [    4.673488] set fb to 2(-1)
    [    4.674896] startvideomode '2160p50' read from /etc/videomode
    [    4.675121] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [    4.708804] HDMI: now connected
    [    4.744999] HDMI: CEC Physical Addr 1.0.0.0 set from EDID
    [    4.745003] HDMI: EDID read ok
    [    4.745006] HDMI: initial mode set!
    [    4.745013] using 50.00Hz as MonitorRefreshRate
    [    4.745017] SET FORMAT: display[0], format='2160p50'
    [    4.745025] HDMI mode
    [    4.745029] use EDID to detect colorspace
    [    4.745033] preferred colorspace: Itu_R_BT_2020_NCL
    [    4.745037] using 12bit output
    [    4.850300] HDMI: CEC use logical address 3
    [    4.850329] HDMI: CEC init completed... state is now 3!
    [    4.989600] HDMI: CEC send ok!
    [    5.146781] VIDEO0: enable deinterlacer
    [    5.146894] VIDEO0: set fallback framerate to 60000
    [    5.146904] VIDEO0: set progressive override mode to 1
    [    5.146907] VIDEO0: set streamtype!
    [    5.146913] ->      set MPEG2
    [    5.146916] ->      sw rave disabled!
    [    5.231371] VIDEO1: set fallback framerate to 60000
    [    5.231384] VIDEO1: set progressive override mode to 1
    [    5.231389] VIDEO1: set streamtype!
    [    5.231394] ->      set MPEG2
    [    5.231397] ->      sw rave disabled!
    [    5.266918] VIDEO2: set fallback framerate to 60000
    [    5.266928] VIDEO2: set progressive override mode to 1
    [    5.266931] VIDEO2: set streamtype!
    [    5.266936] ->      set MPEG2
    [    5.266939] ->      sw rave disabled!
    [    5.279488] set ac3 to downmix
    [    5.279502] set wmapro to downmix
    [    5.279510] set ac3plus to use_hdmi_caps
    [    5.279517] set dtshd to force_dts
    [    5.279525] set aac to downmix
    [    5.279859] audio ch2: add stereo (background decoder) input to mixer DUMMY2
    [    5.279896] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
    [    5.280214] DVB: registering new adapter (BCM7439)
    [    5.311066] autodetecting NIMs...
    [    5.821197] Found: Slot 0, ID: 1c (by CA)
    [    5.821204] Initializing adapter 0 (Si2166D-DVB-S2)
    [    5.828209] (NULL device *): DVB: registering adapter 0 frontend 0 (Si2166D)...
    [    5.828310] Initializing adapter 1 (Si2166D-DVB-S2)
    [    5.830255] (NULL device *): DVB: registering adapter 0 frontend 1 (Si2166D)...
    [    5.830690] init ALSA!
    [    5.831008] registered vtuner misc/vtuner0, minor 52
    [    5.831071] registered vtuner misc/vtuner1, minor 51
    [    5.831127] registered vtuner misc/vtuner2, minor 50
    [    5.831201] registered vtuner misc/vtuner3, minor 49
    [    5.831205] HDMI-RX: init
    [    5.831905] HDMI-RX: no device attached
    [    5.831951] HDMI-RX: video format change event
    [    5.831955] HDMI-RX: hdmi packet status stopped
    [    5.831959] HDMI-RX: hdmiInput0 Receiving DVI  format 
    [    5.831963] HDMI-RX: hdmiInput0 Color Space change from '' to ''
    [    5.831986] HDMI-RX: init done
    [    5.831990] bcm_vce_init()
    [    5.831993] bcm_vce_init() 0
    [    5.832386] CI stopped...
    [    5.854572] vice0: allocate output buffers
    [    5.857349] ble init (0)
    [    5.857559] input: dreambox remote control (bluetooth le) as /devices/virtual/input/input3
    [    5.904364] HDMI: SDCD Event
    [    5.969269] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [    9.695139] systemd[1]: Failed to set up the root directory for shared mount propagation: Invalid argument
    [    9.701822] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [    9.702045] systemd[1]: Detected architecture arm.
    [    9.703586] systemd[1]: Set hostname to .
    [    9.833892] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.service is marked executable. Please remove executable permission bits. Proceeding anyway.
    [    9.851140] systemd[1]: Configuration file /lib/systemd/system/emu-cccam-232.socket is marked executable. Please remove executable permission bits. Proceeding anyway.
    [    9.865449] systemd[1]: Listening on Syslog Socket.
    [    9.865739] systemd[1]: Listening on Journal Socket (/dev/log).
    [    9.865924] systemd[1]: Reached target Swap.
    [    9.867047] systemd[1]: Set up automount data.automount.
    [    9.867113] systemd[1]: Reached target Remote File Systems.
    [    9.867154] systemd[1]: Reached target Paths.
    [    9.867295] systemd[1]: Listening on udev Control Socket.
    [    9.867396] systemd[1]: Listening on udev Kernel Socket.
    [    9.867508] systemd[1]: Listening on Journal Socket.
    [    9.867891] systemd[1]: Created slice User and Session Slice.
    [    9.868059] systemd[1]: Created slice System Slice.
    [    9.869797] systemd[1]: Starting Remount Root and Kernel File Systems...
    [    9.873556] systemd[1]: Starting Load Kernel Modules...
    [    9.875574] systemd[1]: Starting Generate environment for enigma2...
    [    9.876126] systemd[1]: Created slice system-serial\x2dgetty.slice.
    [    9.876298] systemd[1]: Reached target Slices.
    [    9.878748] systemd[1]: Starting Setup Virtual Console...
    [    9.882565] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [    9.888648] systemd[1]: Mounting POSIX Message Queue File System...
    [    9.891820] systemd[1]: Starting Journal Service...
    [    9.913529] systemd[1]: Mounted POSIX Message Queue File System.
    [    9.914568] systemd[1]: Started Remount Root and Kernel File Systems.
    [    9.915117] systemd[1]: Started Setup Virtual Console.
    [    9.926477] systemd[1]: Starting udev Coldplug all Devices...
    [    9.928578] systemd[1]: Starting Load/Save Random Seed...
    [    9.946068] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [    9.947963] systemd[1]: Starting Create Static Device Nodes in /dev...
    [   10.028043] input: dreambox ir keyboard as /devices/virtual/input/input4
    [   10.028306] input: dreambox ir mouse as /devices/virtual/input/input5
    [   10.029738] systemd[1]: Started Load Kernel Modules.
    [   10.031597] systemd[1]: Starting Apply Kernel Variables...
    [   10.047816] systemd[1]: Started Load/Save Random Seed.
    [   10.063671] systemd[1]: Started Apply Kernel Variables.
    [   10.133486] systemd[1]: Started Journal Service.
    [   10.200627] systemd-journald[124]: Received request to flush runtime journal from PID 1
    [   11.152469] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [   11.235523] VIDEO0: set blank to 0
    [   11.235688] sync0 is off so we enable it
    [   11.235695] sync0: allocated pcroffset 0
    [   11.235704] sync0: playback!
    [   11.235722] VIDEO0: total delay: 0 (0 ms)
    [   11.240539] VIDEO0: start decode
    [   11.240558] VIDEO0: flush video decoder
    [   11.240565] VIDEO0 got pts failed !!!! (ret 0)
    [   11.258617] VIDEO0: first pts 0x0
    [   11.258635] VIDEO0: EOTF changed to SDR
    [   11.258640] VIDEO0: framerate changed 3
    [   11.258644] VIDEO0: resolution changed (1280 720)
    [   11.258647] VIDEO0: aspect changed 3
    [   11.258762] set current avs auto aspect to 16:9
    [   11.258775] set current avs auto aspect to 16:9
    [   11.258784] HDMI: using SDR eotf
    [   11.258813] set sb to 3(1)
    [   11.397072] VIDEO0: stop decode
    [   11.397088] sync0 1fff no decoder left in sync handling so disable
    [   11.397092] sync0: was last pcroffset0 user so free it
    [   12.257210] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [   12.259336] f0b00000.ethernet: configuring instance for internal PHY
    [   12.259424] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [   13.409561] si2183(0): DVB-S(2) voltage disabled now
    [   13.411042] si2183(0): DVB-S(2) voltage disabled now
    [   13.413950] si2183(1): DVB-S(2) voltage disabled now
    [   13.415100] si2183(1): DVB-S(2) voltage disabled now
    [   13.432599] HDMI: CEC device open ... state is 3, flushed 0 old messages from RX fifo
    [   13.432712] HDMI: CEC set devtype to 0
    [   13.432722] HDMI: CEC start ... state is now 1
    [   13.432749] HDMI: CEC returned state 1
    [   13.432755] HDMI: CEC state now 801
    [   13.495735] HDMI: CEC use logical address 3
    [   13.495774] HDMI: CEC init completed... state is now 3!
    [   13.564020] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   13.632481] HDMI: CEC send ok!
    [   14.263315] libphy: f0b00000.etherne:01 - Link is Down
    [   14.588480] 0 ms: 
    [   14.621594] 33 ms: 0
    [   14.631391] 10 ms: 0
    [   14.642444] 11 ms: 0
    [   14.965447] 323 ms: 0
    [   15.014219] 49 ms: 3
    [   15.021828] 7 ms: 3
    [   15.022713] 1 ms: 3
    [   15.031905] 9 ms: 3
    [   15.168115] 136 ms: 3
    [   15.195171] 27 ms: 5
    [   15.201068] 5 ms: 5
    [   15.201962] 1 ms: 5
    [   15.202886] 1 ms: 5
    [   15.794750] libphy: f0b00000.etherne:01 - Link is Up - 1000/Full
    [   15.794781] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [   15.917513] 715 ms: 5
    [   15.918932] 1 ms: 9
    [   16.019352] 101 ms: 9
    [   16.020332] 1 ms: 9
    [   16.078777] 58 ms: 9
    [   16.137534] 59 ms: 9
    [   16.138851] 1 ms: 10
    [   16.143636] 5 ms: 10
    [   16.144782] 1 ms: 10
    [   16.145934] 1 ms: 10
    [   16.154673] 9 ms: 10
    [   16.161665] 7 ms: 10
    [   16.252644] change audioenc bitrate to 256000 bits/s
    [   16.261417] vice0: change videoenc bitrate to 6000000 bits/s
    [   16.261430] change audioenc bitrate to 128000 bits/s
    [   16.274394] vice0: change gop length to 0ms
    [   16.274406] vice0: allow new gop on new scene off
    [   16.274413] vice0: change open gop to off
    [   16.274419] vice0: change p-frames to 4
    [   16.274425] vice0: change b-frames to 2
    [   16.274430] vice0: change to 0 slices per pic
    [   16.274497] vice0: change h264 profile to main
    [   16.274506] vice0: change h264 level to 3.1
    [   16.380498] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
    [   16.404410] 243 ms: 10
    [   16.405506] 1 ms: 11
    [   16.682716] 277 ms: 11
    [   16.833804] 151 ms: 12
    [   16.852033] 18 ms: 14
    [   16.860651] 9 ms: 14
    [   16.861759] 1 ms: 14
    [   16.863373] 2 ms: 15
    [   16.867970] 4 ms: 15
    [   16.869297] 2 ms: 15
    [   16.890241] 21 ms: 15
    [   18.580698] 1690 ms: 15
    [   18.610828] 30 ms: 28
    [   18.611872] 1 ms: 28
    [   18.639335] 28 ms: 28
    [   18.641152] 1 ms: 28
    [   18.642330] 2 ms: 28
    [   18.644864] 2 ms: 28
    [   18.649499] 5 ms: 28
    [   18.658895] 9 ms: 28
    [   18.659899] 1 ms: 28
    [   18.760771] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   18.815256] 156 ms: 28
    [   18.940053] 124 ms: 29
    [   18.943039] set input to 0
    [   18.943047] set fb to 2(-1)
    [   18.943057] set current avs auto aspect to 16:9
    [   18.943085] set sb to 3(1)
    [   18.944054] set ac3 to downmix
    [   18.944719] set ac3plus to use_hdmi_caps
    [   18.946369] HDMI: using SDR eotf
    [   18.946663] HDMI: using SDR eotf
    [   18.946954] using 50.00Hz as MonitorRefreshRate
    [   18.946966] VIDEO1: shared window not available
    [   18.946991] SET FORMAT: display[0], format='2160p50'
    [   18.947000] HDMI mode
    [   18.947005] use EDID to detect colorspace
    [   18.947009] preferred colorspace: Itu_R_BT_2020_NCL
    [   18.947013] using 12bit output
    [   19.068952] VIDEO1: shared window not available
    [   19.068990] set current avs auto aspect to 16:9
    [   19.069012] HDMI: using SDR eotf
    [   19.069032] set sb to 3(1)
    [   19.168928] using 50.00Hz as MonitorRefreshRate
    [   19.168941] VIDEO1: shared window not available
    [   19.168965] SET FORMAT: display[0], format='2160p50'
    [   19.168974] HDMI mode
    [   19.168979] use EDID to detect colorspace
    [   19.168983] preferred colorspace: Itu_R_BT_2020_NCL
    [   19.168987] using 12bit output
    [   19.288954] VIDEO1: shared window not available
    [   19.288994] set current avs auto aspect to 16:9
    [   19.289017] HDMI: using SDR eotf
    [   19.289037] set sb to 3(1)
    [   19.289630] 350 ms: 30
    [   19.296215] 7 ms: 35
    [   19.299841] 3 ms: 35
    [   19.340639] 41 ms: 35
    [   19.347215] 7 ms: 35
    [   23.847303] set ac3plus to hdmi_best
    [   23.847451] set dtshd to hdmi_best
    [   23.847560] set aac to hdmi_best
    [   23.847659] set wmapro to hdmi_best
    [   24.147079] set current avs auto aspect to 16:9
    [   24.147108] set sb to 3(1)
    [   24.147366] set current avs auto aspect to 16:9
    [   24.147389] set sb to 3(1)
    [   24.147489] set current avs auto aspect to 16:9
    [   24.147507] set sb to 3(1)
    [   24.147595] set current avs auto aspect to 16:9
    [   24.147607] set sb to 3(1)
    [   24.168882] set current avs auto aspect to 16:9
    [   24.168931] set sb to 3(1)
    [   24.169149] set current avs auto aspect to 16:9
    [   24.169173] set sb to 3(1)
    [   24.189030] set current avs auto aspect to 16:9
    [   24.189749] set current avs auto aspect to 16:9
    [   24.189866] set current avs auto aspect to 16:9
    [   24.189969] set current avs auto aspect to 16:9
    [   24.190412] set current avs auto aspect to 16:9
    [   24.190484] set current avs auto aspect to 16:9
    [   24.190545] set current avs auto aspect to 16:9
    [   24.190895] set current avs auto aspect to 16:9
    [   24.190982] set current avs auto aspect to 16:9
    [   24.191252] set sb to 3(1)
    [   24.192932] set current avs auto aspect to 16:9
    [   24.192964] set sb to 3(1)
    [   24.193076] set current avs auto aspect to 16:9
    [   24.193102] set sb to 3(1)
    [   24.193382] set current avs auto aspect to 16:9
    [   24.193404] set sb to 3(1)
    [   24.300386] 4953 ms: 35
    [   24.354154] 53 ms: 82
    [   25.108956] set current avs auto aspect to 16:9
    [   25.108988] set sb to 3(1)
    [   25.109102] set current avs auto aspect to 16:9
    [   25.109117] set sb to 3(1)
    [   25.110321] set current avs auto aspect to 16:9
    [   25.110348] set sb to 3(1)
    [   25.110477] set current avs auto aspect to 16:9
    [   25.110493] set sb to 3(1)
    [   25.657731] 1304 ms: 83
    [   26.104637] 447 ms: 96
    [   26.144144] set mute 0 1
    [   26.145345] 41 ms: 99
    [   26.150856] 5 ms: 99
    [   26.424260] si2183(1): DVB-S(2) voltage is 18V now
    [   26.425395] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   26.425608] start PCR0 on dmx 0 pid:17e5 index 2
    [   26.425776] start AUDIO0 on dmx 0 pid:17e6 index 1
    [   26.425782] audio ch0: xpt start
    [   26.425791] audio ch0: reset GA threshold to 8ms
    [   26.425808] sync0 is off so we enable it
    [   26.425814] sync0: allocated pcroffset 0
    [   26.425828] sync0: demux-index 0 pcr pid 17e5
    [   26.425852] sync0: using 2 as pcr pidchannel
    [   26.425915] audio ch0: MPEG
    [   26.425923] audio ch0: streamtype set 0
    [   26.425927] audio ch0: streamtype_set: stop rave
    [   26.425955] audio ch0: add stereo input to mixer DAC
    [   26.425976] audio ch0: add stereo input to mixer SPDIF
    [   26.425993] audio ch0: add stereo input to mixer MAI
    [   26.426006] audio ch0: mai sample rate changed isr (48000)
    [   26.426025] audio ch0: streamtype_set: restart rave
    [   26.426130] audio ch0: decoder start
    [   26.426137] audio ch0: video delay 0 (0 ms)
    [   26.426143] VIDEO0: total delay: 0 (0 ms)
    [   26.427176] start VIDEO0 on dmx 0 pid:17e5 index 2
    [   26.427245] VIDEO0: total delay: 0 (0 ms)
    [   26.432410] VIDEO0: start decode
    [   26.444776] HDMI: CEC returned state 3
    [   26.444786] HDMI: CEC state now 803
    [   26.778822] HDMI: CEC send ok!
    [   26.896012] HDMI: CEC send ok!
    [   27.056769] HDMI: CEC send ok!
    [   27.387878] HDMI: CEC send ok!
    [   27.443515] HDMI: CEC send ok!
    [   27.577256] HDMI: CEC recv ok!
    [   27.714720] HDMI: CEC send ok!
    [   27.746359] si2183(1): start tune freq 1943000, sr 34200000, delsys 6
    [   27.746367] si2183(1): IS_ID 35
    [   27.746373] si2183(1): PLS_MODE 1, PLS_CODE 0
    [   27.746814] si2183(1): PLS Gold code 0 set
    [   27.834380] HDMI: CEC send ok!
    [   27.845349] si2183(1): found carrier after 112 ms
    [   27.902522] HDMI: CEC send ok!
    [   28.036272] HDMI: CEC recv ok!
    [   28.104183] HDMI: CEC send ok!
    [   28.131754] si2183(1): final lock after 398 ms
    [   28.228816] HDMI: CEC send ok!
    [   28.333788] HDMI: CEC recv ok!
    [   28.388538] audio ch0: first pts 0xb126ae26, stc 0xb1269b16, pcr valid
    [   28.397768] HDMI: CEC send ok
    [   28.420525] audio ch0: lock
    [   28.420555] audio ch0: sample rate changed isr (48000)
    [   28.487512] audio ch0: status ready isr
    [   28.518963] dvb_demux_feed_del: feed not in list (type=0 state=0 pid=ffff)
    [   28.608716] HDMI: CEC recv ok!
    [   28.672722] HDMI: CEC send ok!
    [   28.783211] HDMI: CEC recv ok!
    [   28.847212] HDMI: CEC send ok!
    [   28.915405] HDMI: CEC send ok!
    [   28.955337] VIDEO0: first pts 0xb127f1f0
    [   28.955366] VIDEO0: resolution changed (720 576)
    [   29.016455] HDMI: CEC recv ok!
    [   29.105230] VIDEO0: enable tsm
    [   29.475311] VIDEO0: progressive changed (0)
    [   71.108760] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
    [   71.148587] set current avs auto aspect to 16:9
    [   71.148614] set sb to 3(1)
    [ 1971.182737] VIDEO0: dst_left, dst_top, dst_width and dst_height is 0.. reset to defaults!
    [ 1971.222562] set current avs auto aspect to 16:9
    [ 1971.222591] set sb to 3(1)
    root@dm900:
    Grazie ho modificato il post poiche' era troppo lungo..vediamo cosa possiamo fare.
    Dream-Elite Donation - Thanks for your support

    Dream Elite 7

  5. #5
    Newbie
    Join Date
    Dec 2017
    Posts
    6
    Post Thanks / Like
    Rep Power
    0

    Default Re: Migliore DTT usb

    Ottimo, grazie per il lavoro di sviluppo che fate!

  6. #6
    Administrator makaveli's Avatar
    Join Date
    Jul 2016
    Posts
    737
    Post Thanks / Like
    Rep Power
    10

    Default AW: Migliore DTT usb

    Prova a mettere questo file "sms1xxx-hcw-55xxx-dvbt-02.fw" nella cartella /lib/firmware/ con gli diritti 644
    Riavvia e vedi se il tuo USB DVB-T viene riconosciuto
    Attached Files Attached Files
    Dream-Elite Donation - Thanks for your support

  7. #7
    Newbie
    Join Date
    Dec 2017
    Posts
    6
    Post Thanks / Like
    Rep Power
    0

    Default Re: Migliore DTT usb

    Provato ma non me lo vede nella configurazione dei tuner.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •