Page 3 of 3 FirstFirst 123
Results 21 to 26 of 26
  1. #21
    Advanced
    Join Date
    Apr 2017
    Posts
    69
    Post Thanks / Like
    Rep Power
    3

    Default Re: Nuova immagine Dream ELITE 14/10/2018 e drivers chiavette Wifi

    Ho finalmente ricevuto la chiavetta!
    Come supponevo non l'avete implementata nella DREAM ELITE

    Ho visto che questa chiavetta é supportata da LINUX

    Riporto il risultato dei comandi che vengono fuori lanciando i comandi (nel sistema oltre la chiavetta WIFI NUOVA c'é anche la chiavetta originale marchiata DREAMBOX!

    dm920 login: root
    root@dm920:~# lsusb
    Bus 003 Device 002: ID 07b8:8188
    Bus 004 Device 002: ID 0bda:b812
    Bus 001 Device 001: ID 1d6b:0002
    Bus 002 Device 001: ID 1d6b:0003
    Bus 003 Device 001: ID 1d6b:0002
    Bus 004 Device 001: ID 1d6b:0002
    Bus 005 Device 001: ID 1d6b:0001
    Bus 006 Device 001: ID 1d6b:0001
    Last edited by Venturer; 7th November 2019 at 23:00.

  2. #22
    Advanced
    Join Date
    Apr 2017
    Posts
    69
    Post Thanks / Like
    Rep Power
    3

    Default Re: Nuova immagine Dream ELITE 14/10/2018 e drivers chiavette Wifi

    Code:
    root@dm920:~# dmesg
    [    0.000000] Booting Linux on physical CPU 0x0
    [    0.000000] Initializing cgroup subsys cpuset
    [    0.000000] Initializing cgroup subsys cpu
    [    0.000000] Initializing cgroup subsys cpuacct
    [    0.000000] Linux version 3.14-1.17-dm920 (jenkins@oe25-dev) (gcc version 5.3.0 (GCC) ) #1 SMP Wed May 15 15:32:46 CEST 2019
    [    0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c7387d
    [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
    [    0.000000] Machine model: BCM97252SSFF
    [    0.000000] moving dtb from 0x0000000007728000 to 0x0000000000837e70
    [    0.000000] bmem: Reserved 640 MiB at 0x0000000018000000
    [    0.000000] bmem: Reserved 384 MiB at 0x0000000080000000
    [    0.000000] cma: Reserved 16 MiB at 0x000000000f000000
    [    0.000000] Memory policy: Data cache writealloc
    [    0.000000] On node 0 totalpages: 524288
    [    0.000000]   Normal zone: 512 pages used for memmap
    [    0.000000]   Normal zone: 0 pages reserved
    [    0.000000]   Normal zone: 65536 pages, LIFO batch:15
    [    0.000000]   HighMem zone: 3584 pages used for memmap
    [    0.000000]   HighMem zone: 458752 pages, LIFO batch:31
    [    0.000000] MCP: Enabling write pairing
    [    0.000000] PERCPU: Embedded 8 pages/cpu @cdfc0000 s8384 r8192 d16192 u32768
    [    0.000000] pcpu-alloc: s8384 r8192 d16192 u32768 alloc=8*4096
    [    0.000000] pcpu-alloc: [0] 0 [0] 1 
    [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523776
    [    0.000000] Kernel command line: bmem=640M@384M bmem=384M@2048M console=ttyS0,1000000 root=/dev/mmcblk0p2 rootwait rootfstype=ext4 coherent_pool=2M
    [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    [    0.000000] Memory: 1006904K/2097152K available (6114K kernel code, 214K rwdata, 1596K rodata, 244K init, 208K bss, 1073864K reserved, 16384K cma-reserved, 786428K highmem)
    [    0.000000] Virtual kernel memory layout:
    [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    [    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    [    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    [    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
    [    0.000000]       .text : 0xc0008000 - 0xc078fcec   (7712 kB)
    [    0.000000]       .init : 0xc0790000 - 0xc07cd0c0   ( 245 kB)
    [    0.000000]       .data : 0xc07ce000 - 0xc0803b20   ( 215 kB)
    [    0.000000]        .bss : 0xc0803b28 - 0xc0837e70   ( 209 kB)
    [    0.000000] Hierarchical RCU implementation.
    [    0.000000]  Additional per-CPU info printed with stalls.
    [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
    [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
    [    0.000000] NR_IRQS:16 nr_irqs:16 16
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc403000, parent irq: 93)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc3e1000, parent irq: 64)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc410640, parent irq: 95)
    [    0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xfc4d1200, parent irq: 58)
    [    0.000000] Architected cp15 timer(s) running at 27.00MHz (virt).
    [    0.000004] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 2545165795328ns
    [    0.000010] Switching to timer-based delay loop
    [    0.000237] Console: colour dummy device 80x30
    [    0.000257] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
    [    0.000265] pid_max: default: 32768 minimum: 301
    [    0.000357] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.000362] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
    [    0.005847] Initializing cgroup subsys devices
    [    0.005861] Initializing cgroup subsys freezer
    [    0.005867] Initializing cgroup subsys net_cls
    [    0.005892] CPU: Testing write buffer coherency: ok
    [    0.006112] CPU0: update cpu_power 1024
    [    0.006119] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
    [    0.006167] Setting up static identity map for 0x5d5ab8 - 0x5d5b10
    [    0.007381] CPU1: Booted secondary processor
    [    0.007398] CPU1: update cpu_power 1024
    [    0.007401] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
    [    0.007472] Brought up 2 CPUs
    [    0.007481] SMP: Total of 2 processors activated (108.00 BogoMIPS).
    [    0.007486] CPU: All CPU(s) started in SVC mode.
    [    0.007868] devtmpfs: initialized
    [    0.011482] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
    [    0.012038] regulator-dummy: no parameters
    [    0.012230] NET: Registered protocol family 16
    [    0.013164] DMA: preallocated 2048 KiB pool for atomic coherent allocations
    [    0.013354] cpuidle: using governor ladder
    [    0.013359] cpuidle: using governor menu
    [    0.014505] irq: no irq domain found for /rdb/interrupt-controller@f040a700 !
    [    0.014588] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.016288] syscon f0404000.syscon: regmap [mem 0xf0404000-0xf0404523] registered
    [    0.016361] syscon f03e2400.syscon: regmap [mem 0xf03e2400-0xf03e27ff] registered
    [    0.016427] syscon f0452000.syscon: regmap [mem 0xf0452000-0xf04520ff] registered
    [    0.016494] syscon f0404100.syscon: regmap [mem 0xf0404100-0xf040415b] registered
    [    0.016557] syscon f040415c.syscon: regmap [mem 0xf040415c-0xf040419b] registered
    [    0.016623] syscon f0410700.syscon: regmap [mem 0xf0410700-0xf041070b] registered
    [    0.016688] syscon f041070c.syscon: regmap [mem 0xf041070c-0xf0410713] registered
    [    0.016751] syscon f1101004.syscon: regmap [mem 0xf1101004-0xf1101403] registered
    [    0.016812] syscon f1181004.syscon: regmap [mem 0xf1181004-0xf1181403] registered
    [    0.016882] syscon f0404080.syscon: regmap [mem 0xf0404080-0xf0404083] registered
    [    0.016948] syscon f04040a4.syscon: regmap [mem 0xf04040a4-0xf04040a7] registered
    [    0.017011] syscon f03e0154.syscon: regmap [mem 0xf03e0154-0xf03e0157] registered
    [    0.017072] syscon f03e0354.syscon: regmap [mem 0xf03e0354-0xf03e0357] registered
    [    0.017149] syscon f03e0400.syscon: regmap [mem 0xf03e0400-0xf03e0403] registered
    [    0.017451] irq: no irq domain found for /rdb/interrupt-controller@f0417380 !
    [    0.017678] Broadcom Brahma-B15 readahead cache at: 0xfc3e2478
    [    0.022020] bio: create slab <bio-0> at 0
    [    0.022325] brcmstb-gpio f040a600.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022351] brcmstb-gpio f040a600.gpio: Registered 5 banks (GPIO(s): 0-159)
    [    0.022379] brcmstb-gpio f0417400.gpio: Couldn't get IRQ. Enable CONFIG_BCM7120_L2_IRQ if you want GPIO interrupt support
    [    0.022392] brcmstb-gpio f0417400.gpio: Registered 2 banks (GPIO(s): 160-223)
    [    0.022737] SCSI subsystem initialized
    [    0.022836] libata version 3.00 loaded.
    [    0.022955] usbcore: registered new interface driver usbfs
    [    0.022984] usbcore: registered new interface driver hub
    [    0.023043] usbcore: registered new device driver usb
    [    0.023062] media: Linux media interface: v0.10
    [    0.023088] Linux video capture interface: v2.00
    [    0.023125] pps_core: LinuxPPS API ver. 1 registered
    [    0.023128] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
    [    0.023138] PTP clock support registered
    [    0.023377] Advanced Linux Sound Architecture Driver Initialized.
    [    0.023665] Bluetooth: Core ver 2.18
    [    0.023679] NET: Registered protocol family 31
    [    0.023683] Bluetooth: HCI device and connection manager initialized
    [    0.023691] Bluetooth: HCI socket layer initialized
    [    0.023697] Bluetooth: L2CAP socket layer initialized
    [    0.023703] Bluetooth: SCO socket layer initialized
    [    0.024100] Switched to clocksource arch_sys_counter
    [    0.024112] cfg80211: Calling CRDA to update world regulatory domain
    [    0.028488] thermal thermal_zone0: failed to read out thermal zone 0
    [    0.028573] NET: Registered protocol family 2
    [    0.028976] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
    [    0.028994] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
    [    0.029016] TCP: Hash tables configured (established 2048 bind 2048)
    [    0.029049] TCP: reno registered
    [    0.029056] UDP hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029067] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
    [    0.029208] NET: Registered protocol family 1
    [    0.029430] RPC: Registered named UNIX socket transport module.
    [    0.029435] RPC: Registered udp transport module.
    [    0.029439] RPC: Registered tcp transport module.
    [    0.029442] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [    0.029449] PCI: CLS 0 bytes, default 64
    [    0.030051] futex hash table entries: 512 (order: 3, 32768 bytes)
    [    0.030390] bounce pool size: 64 pages
    [    0.030914] NFS: Registering the id_resolver key type
    [    0.030945] Key type id_resolver registered
    [    0.030950] Key type id_legacy registered
    [    0.030960] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
    [    0.031080] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [    0.031390] msgmni has been set to 462
    [    0.032152] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
    [    0.032160] io scheduler noop registered
    [    0.032179] io scheduler cfq registered (default)
    [    0.032394] brcm-gisb-arb f0400000.gisb-arb: registered mem: fc400000, irqs: 258, 259
    [    0.032670] brcm-usb-phy f0470200.usb-phy: USB3.0 clock not found in Device Tree
    [    0.098376] brcmstb_memc f1102000.memc-ddr: registered
    [    0.098405] brcmstb_memc f1182000.memc-ddr: registered
    [    0.098590] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [    0.099370] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 107, base_baud = 5062500) is a 16550A
    [    0.100200] loop: module loaded
    [    0.100477] ahci brcmstb-ahci.0: can't get clock
    [    0.100562] ahci brcmstb-ahci.0: SSS flag set, parallel bus scan disabled
    [    0.111114] ahci brcmstb-ahci.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl platform mode
    [    0.111122] ahci brcmstb-ahci.0: flags: 64bit ncq sntf stag pm clo pmp slum part 
    [    0.112902] scsi0 : ahci_platform
    [    0.113147] scsi1 : ahci_platform
    [    0.113273] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 91
    [    0.113278] ata2: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x180 irq 91
    [    0.113771] spi_brcmstb f03e3400.spi: 1-lane output, 3-byte address
    [    0.113831] spi_brcmstb f03e3400.spi: master is unqueued, this is deprecated
    [    0.114202] m25p80 spi32766.0: found mx25l25635e, expected m25p80
    [    0.114219] spi_brcmstb f03e3400.spi: 1-lane output, 4-byte address
    [    0.114237] m25p80 spi32766.0: mx25l25635e (32768 Kbytes)
    [    0.114262] 5 ofpart partitions found on MTD device spi32766.0
    [    0.114266] Creating 5 MTD partitions on "spi32766.0":
    [    0.114272] 0x000000000000-0x000000200000 : "flash0.bolt"
    [    0.114767] 0x000000200000-0x000000220000 : "flash0.nvram"
    [    0.115200] 0x000000220000-0x000000240000 : "flash0.devtree"
    [    0.115602] 0x000000240000-0x000001000000 : "flash0.recovery"
    [    0.115995] 0x000000000000-0x000002000000 : "flash0"
    [    0.116700] libphy: Fixed MDIO Bus: probed
    [    0.116825] tun: Universal TUN/TAP device driver, 1.6
    [    0.116828] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
    [    0.117169] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
    [    0.130106] libphy: bcmgenet MII bus: probed
    [    0.150986] xhci-brcm: xHCI BRCM driver
    [    0.151058] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.151077] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 1
    [    0.151402] xhci-brcm f0471000.xhci_v2: irq 149, io mem 0xf0471000
    [    0.151534] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.151541] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.151545] usb usb1: Product: xHCI Host Controller
    [    0.151549] usb usb1: Manufacturer: Linux 3.14-1.17-dm920 xhci-hcd
    [    0.151553] usb usb1: SerialNumber: f0471000.xhci_v2
    [    0.151885] hub 1-0:1.0: USB hub found
    [    0.151908] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
    [    0.152020] xhci-brcm f0471000.xhci_v2: xHCI Host Controller
    [    0.152030] xhci-brcm f0471000.xhci_v2: new USB bus registered, assigned bus number 2
    [    0.152173] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
    [    0.152179] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.152183] usb usb2: Product: xHCI Host Controller
    [    0.152187] usb usb2: Manufacturer: Linux 3.14-1.17-dm920 xhci-hcd
    [    0.152191] usb usb2: SerialNumber: f0471000.xhci_v2
    [    0.152472] hub 2-0:1.0: USB hub found
    [    0.152493] hub 2-0:1.0: 2 ports detected
    [    0.152802] ehci-brcm: EHCI BRCM driver
    [    0.152877] ehci-brcm f0470300.ehci_v2: EHCI Host Controller
    [    0.152893] ehci-brcm f0470300.ehci_v2: new USB bus registered, assigned bus number 3
    [    0.163006] ehci-brcm f0470300.ehci_v2: irq 145, io mem 0xf0470300
    [    0.168108] ehci-brcm f0470300.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.168217] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.168222] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.168226] usb usb3: Product: EHCI Host Controller
    [    0.168230] usb usb3: Manufacturer: Linux 3.14-1.17-dm920 ehci_hcd
    [    0.168234] usb usb3: SerialNumber: f0470300.ehci_v2
    [    0.168501] hub 3-0:1.0: USB hub found
    [    0.168522] hub 3-0:1.0: 1 port detected
    [    0.168727] ehci-brcm f0470500.ehci_v2: EHCI Host Controller
    [    0.168741] ehci-brcm f0470500.ehci_v2: new USB bus registered, assigned bus number 4
    [    0.178868] ehci-brcm f0470500.ehci_v2: irq 146, io mem 0xf0470500
    [    0.184106] ehci-brcm f0470500.ehci_v2: USB 2.0 started, EHCI 1.00
    [    0.184208] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
    [    0.184213] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.184217] usb usb4: Product: EHCI Host Controller
    [    0.184222] usb usb4: Manufacturer: Linux 3.14-1.17-dm920 ehci_hcd
    [    0.184226] usb usb4: SerialNumber: f0470500.ehci_v2
    [    0.184477] hub 4-0:1.0: USB hub found
    [    0.184499] hub 4-0:1.0: 1 port detected
    [    0.184752] ohci-brcm: OHCI BRCM driver
    [    0.184814] ohci-brcm f0470400.ohci_v2: BRCM OHCI controller
    [    0.184828] ohci-brcm f0470400.ohci_v2: new USB bus registered, assigned bus number 5
    [    0.184852] ohci-brcm f0470400.ohci_v2: irq 147, io mem 0xf0470400
    [    0.239212] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.239217] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.239221] usb usb5: Product: BRCM OHCI controller
    [    0.239225] usb usb5: Manufacturer: Linux 3.14-1.17-dm920 ohci_hcd
    [    0.239229] usb usb5: SerialNumber: f0470400.ohci_v2
    [    0.239490] hub 5-0:1.0: USB hub found
    [    0.239511] hub 5-0:1.0: 1 port detected
    [    0.239699] ohci-brcm f0470600.ohci_v2: BRCM OHCI controller
    [    0.239712] ohci-brcm f0470600.ohci_v2: new USB bus registered, assigned bus number 6
    [    0.239731] ohci-brcm f0470600.ohci_v2: irq 148, io mem 0xf0470600
    [    0.294208] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
    [    0.294213] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
    [    0.294217] usb usb6: Product: BRCM OHCI controller
    [    0.294221] usb usb6: Manufacturer: Linux 3.14-1.17-dm920 ohci_hcd
    [    0.294225] usb usb6: SerialNumber: f0470600.ohci_v2
    [    0.294482] hub 6-0:1.0: USB hub found
    [    0.294507] hub 6-0:1.0: 1 port detected
    [    0.294744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [    0.294748] ehci-pci: EHCI PCI platform driver
    [    0.294789] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [    0.294794] ohci-pci: OHCI PCI platform driver
    [    0.294908] usbcore: registered new interface driver usb-storage
    [    0.294915] i2c /dev entries driver
    [    0.294958] lirc_dev: IR Remote Control driver registered, major 250 
    [    0.295300] brcmstb_thermal f04d1500.thermal: registered AVS TMON of-sensor driver
    [    0.295406] usbcore: registered new interface driver btusb
    [    0.295465] cpufreq_cpu0: failed to get cpu0 regulator: -19
    [    0.295633] brcmstb-cpufreq: probe of f03e257c.cpu-clk-div failed with error -17
    [    0.295706] sdhci: Secure Digital Host Controller Interface driver
    [    0.295709] sdhci: Copyright(c) Pierre Ossman
    [    0.295712] sdhci-pltfm: SDHCI platform and OF driver helper
    [    0.296808] mmc0: no vqmmc regulator found
    [    0.296814] mmc0: no vmmc regulator found
    [    0.327109] mmc0: SDHCI controller on f03e0000.sdhci [f03e0000.sdhci] using ADMA
    [    0.328179] mmc1: no vqmmc regulator found
    [    0.328184] mmc1: no vmmc regulator found
    [    0.358105] mmc1: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
    [    0.358211] hidraw: raw HID events driver (C) Jiri Kosina
    [    0.358297] usbcore: registered new interface driver usbhid
    [    0.358300] usbhid: USB HID core driver
    [    0.360526] TCP: cubic registered
    [    0.360583] NET: Registered protocol family 10
    [    0.363006] NET: Registered protocol family 17
    [    0.363914] Bluetooth: RFCOMM TTY layer initialized
    [    0.363926] Bluetooth: RFCOMM socket layer initialized
    [    0.363929] Bluetooth: RFCOMM ver 1.11
    [    0.363934] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [    0.363937] Bluetooth: BNEP filters: protocol multicast
    [    0.363943] Bluetooth: BNEP socket layer initialized
    [    0.363946] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
    [    0.363953] Bluetooth: HIDP socket layer initialized
    [    0.363996] l2tp_core: L2TP core driver, V2.0
    [    0.364018] Key type dns_resolver registered
    [    0.364108] Registering SWP/SWPB emulation handler
    [    0.364369] regulator-dummy: disabling
    [    0.364626] ALSA device list:
    [    0.364632]   No soundcards found.
    [    0.364682] Warning: unable to open an initial console.
    [    0.364736] Waiting for root device /dev/mmcblk0p2...
    [    0.425745] mmc1: BKOPS_EN bit is not set
    [    0.432121] mmc1: new high speed MMC card at address 0001
    [    0.432330] mmcblk0: mmc1:0001 8GME4R 7.28 GiB 
    [    0.432427] mmcblk0boot0: mmc1:0001 8GME4R partition 1 4.00 MiB
    [    0.432526] mmcblk0boot1: mmc1:0001 8GME4R partition 2 4.00 MiB
    [    0.432610] mmcblk0rpmb: mmc1:0001 8GME4R partition 3 512 KiB
    [    0.435948]  mmcblk0: p1 p2 p3
    [    0.438061]  mmcblk0boot1: unknown partition table
    [    0.438548]  mmcblk0boot0: unknown partition table
    [    0.466646] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
    [    0.466653] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
    [    0.470134] usb 3-1: new high-speed USB device number 2 using ehci-brcm
    [    0.586921] usb 3-1: New USB device found, idVendor=07b8, idProduct=8188
    [    0.586930] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    0.586935] usb 3-1: Product: RTL8188S WLAN Adapter 
    [    0.586939] usb 3-1: Manufacturer: Manufacturer Realtek 
    [    0.586943] usb 3-1: SerialNumber: 00e04c000001
    [    0.623412] EXT4-fs (mmcblk0p2): recovery complete
    [    0.624090] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
    [    0.624134] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
    [    0.624902] devtmpfs: mounted
    [    0.689146] usb 4-1: new high-speed USB device number 2 using ehci-brcm
    [    0.727810] random: systemd: uninitialized urandom read (16 bytes read, 64 bits of entropy available)
    [    0.731001] systemd[1]: systemd 230 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
    [    0.731279] systemd[1]: Detected architecture arm.
    [    0.732200] systemd[1]: Set hostname to <dm920>.
    [    0.744909] random: systemd: uninitialized urandom read (16 bytes read, 67 bits of entropy available)
    [    0.761658] systemd-fstab-generator[72]: Checking was requested for "rootfs", but it is not a device.
    [    0.761830] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 70 bits of entropy available)
    [    0.778199] random: systemd: uninitialized urandom read (16 bytes read, 73 bits of entropy available)
    [    0.778334] random: systemd: uninitialized urandom read (16 bytes read, 73 bits of entropy available)
    [    0.778589] random: systemd: uninitialized urandom read (16 bytes read, 73 bits of entropy available)
    [    0.778720] random: systemd: uninitialized urandom read (16 bytes read, 73 bits of entropy available)
    [    0.778945] random: systemd: uninitialized urandom read (16 bytes read, 73 bits of entropy available)
    [    0.783549] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available)
    [    0.786248] random: systemd: uninitialized urandom read (16 bytes read, 74 bits of entropy available)
    [    0.805281] usb 4-1: New USB device found, idVendor=0bda, idProduct=b812
    [    0.805291] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [    0.805299] usb 4-1: Product: USB3.0 802.11ac 1200M Adapter
    [    0.805305] usb 4-1: Manufacturer: Realtek
    [    0.805309] usb 4-1: SerialNumber: 123456
    [    0.814631] systemd[1]: Configuration file /lib/systemd/system/emu-oscam-11529.socket is marked executable. Please remove executable permission bits. Proceeding anyway.
    [    0.816825] systemd[1]: Configuration file /lib/systemd/system/emu-oscam-11529.service is marked executable. Please remove executable permission bits. Proceeding anyway.
    [    0.850218] systemd[1]: Reached target Paths.
    [    0.850456] systemd[1]: Reached target Swap.
    [    0.850593] systemd[1]: Listening on udev Kernel Socket.
    [    0.854625] systemd[1]: Set up automount media-Diskstation.automount.
    [    0.855147] systemd[1]: Set up automount data.automount.
    [    0.855541] systemd[1]: Created slice System Slice.
    [    0.855680] systemd[1]: Listening on Syslog Socket.
    [    0.855806] systemd[1]: Listening on udev Control Socket.
    [    0.855911] systemd[1]: Listening on Journal Socket.
    [    0.858700] systemd[1]: Starting Load Kernel Modules...
    [    0.861191] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [    0.861381] systemd[1]: Listening on Journal Socket (/dev/log).
    [    0.862959] systemd[1]: Starting Journal Service...
    [    0.863449] systemd[1]: Created slice system-serial\x2dgetty.slice.
    [    0.864895] systemd[1]: Starting Remount Root and Kernel File Systems...
    [    0.865315] systemd[1]: Created slice User and Session Slice.
    [    0.865410] systemd[1]: Reached target Slices.
    [    0.880530] systemd[1]: Set up automount media-DiskstationUSB.automount.
    [    0.880711] systemd[1]: Reached target Remote File Systems.
    [    0.882540] systemd[1]: Starting Setup Virtual Console...
    [    0.884348] systemd[1]: Mounting POSIX Message Queue File System...
    [    0.886138] systemd[1]: Starting Generate environment for enigma2...
    [    0.895792] systemd[1]: Started Setup Virtual Console.
    [    0.912587] systemd[1]: Mounted POSIX Message Queue File System.
    [    0.921245] systemd[1]: Started Create list of required static device nodes for the current kernel.
    [    0.936495] stb_core: module license 'Proprietary' taints kernel.
    [    0.936508] Disabling lock debugging due to kernel taint
    [    0.960483] input: dreambox remote control (native) as /devices/virtual/input/input0
    [    0.960848] input: dreambox advanced remote control (native) as /devices/virtual/input/input1
    [    0.970500] systemd[1]: Started Journal Service.
    [    1.063245] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
    [    1.217687] bcm7439: xvd 20160630, vdc 20160630, rap 20160630, xpt 20160630, driver version 20190720-dm920
    [    1.239501] systemd-journald[83]: Received request to flush runtime journal from PID 1
    [    1.240896] random: nonblocking pool is initialized
    [    1.506016] r8712u: module is from the staging directory, the quality is unknown, you have been warned.
    [    1.507354] r8712u: Staging version
    [    1.507396] r8712u: register rtl8712_netdev_ops to netdev_ops
    [    1.507408] usb 3-1: r8712u: USB_SPEED_HIGH with 4 endpoints
    [    1.510660] usb 3-1: r8712u: Boot from EFUSE: Autoload OK
    [    1.833327] 1:832234376 SMCB: controller reset timed out
    [    2.198276] register adapter
    [    2.198500] register adapter
    [    2.198653] register adapter
    [    2.198792] register adapter
    [    2.198939] register adapter
    [    2.199067] fpga init
    [    2.326576] usb 3-1: r8712u: CustomerID = 0x0000
    [    2.326595] usb 3-1: r8712u: MAC Address from efuse = ec:f0:0e:16:41:4d
    [    2.326608] usb 3-1: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
    [    2.326783] usbcore: registered new interface driver r8712u
    [    4.244581] fpga prog done
    [    4.250015] using fpga version 47
    [    4.250364] fp: uart recv error 98
    [    4.250745] swd: status is 0, pls check
    [    4.250748] swd: cannot init port
    [    4.250752] ble module not found
    [    4.250904] input: dreambox front panel as /devices/virtual/input/input2
    [    4.251760] HDMI: CEC start ... state is now 1
    [    4.252003] set input to 0
    [    4.252008] set fb to 2(-1)
    [    4.253682] startvideomode '1080p50' read from /etc/videomode
    [    4.254070] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8_G8_B8)
    [    4.321137] HDMI: ignore false positive disconnect!
    [    4.321146] HDMI: now powered down
    [    4.321152] HDMI: Unable to retrieve Rx EDID info.. no rx device
    [    4.321160] using 50.00Hz as MonitorRefreshRate
    [    4.321164] SET FORMAT: display[0], format='1080p50'
    [    4.324501] HDMI: CEC use logical address 3
    [    4.324526] HDMI: CEC init completed... state is now 3!
    [    4.463800] HDMI: CEC send ok!
    [    4.626445] HDMI: CEC recv ok!
    [    4.685100] HDMI: CEC recv ok!
    [    4.708209] VIDEO0: enable deinterlacer
    [    4.708320] VIDEO0: set fallback framerate to 60000
    [    4.708331] VIDEO0: set progressive override mode to 1
    [    4.708336] VIDEO0: set streamtype!
    [    4.708342] ->      set MPEG2
    [    4.708346] ->      sw rave disabled!
    [    4.792769] VIDEO1: set fallback framerate to 60000
    [    4.792782] VIDEO1: set progressive override mode to 1
    [    4.792787] VIDEO1: set streamtype!
    [    4.792793] ->      set MPEG2
    [    4.792796] ->      sw rave disabled!
    [    4.828345] VIDEO2: set fallback framerate to 60000
    [    4.828356] VIDEO2: set progressive override mode to 1
    [    4.828360] VIDEO2: set streamtype!
    [    4.828365] ->      set MPEG2
    [    4.828368] ->      sw rave disabled!
    [    4.841404] set ac3 to downmix
    [    4.841418] set wmapro to downmix
    [    4.841426] set ac3plus to use_hdmi_caps
    [    4.841433] set dtshd to force_dts
    [    4.841443] set aac to downmix
    [    4.841782] audio ch2: add stereo (background decoder) input to mixer DUMMY2
    [    4.841822] audio ch1: add stereo (hdmi-rx) input to mixer DUMMY
    [    4.842150] DVB: registering new adapter (BCM7439)
    [    5.032755] autodetecting NIMs...
    [    5.038340] i2c: ret=-110
    [    5.057865] VIDEO0: set blank to 0
    [    5.058032] sync0 is off so we enable it
    [    5.058039] sync0: allocated pcroffset 0
    [    5.058047] sync0: playback!
    [    5.058065] VIDEO0: total delay: 0 (0 ms)
    [    5.062876] VIDEO0: start decode
    [    5.062892] VIDEO0: flush video decoder
    [    5.062898] VIDEO0 got pts failed !!!! (ret 0)
    [    5.087603] VIDEO0: first pts 0x0
    [    5.087628] VIDEO0: EOTF changed to SDR
    [    5.087642] VIDEO0: framerate changed 3
    [    5.087658] VIDEO0: resolution changed (1280 720)
    [    5.087670] VIDEO0: aspect changed 3
    [    5.087774] set current avs auto aspect to 16:9
    [    5.087791] set current avs auto aspect to 16:9
    [    5.087818] set sb to 3(1)
    [    5.089695] i2c: ret=-110
    [    5.140663] i2c: ret=-110
    [    5.191660] i2c: ret=-110
    [    5.219279] VIDEO0: stop decode
    [    5.219289] sync0 1fff no decoder left in sync handling so disable
    [    5.219292] sync0: was last pcroffset0 user so free it
    [    5.242672] i2c: ret=-110
    [    5.293659] i2c: ret=-110
    [    5.327120] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [    5.344657] i2c: ret=-110
    [    5.393911] ata1.00: ATA-10: ST5000LM000-2AN170, 0001, max UDMA/133
    [    5.393916] ata1.00: 9767541168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [    5.395655] i2c: ret=-110
    [    5.397598] ata1.00: configured for UDMA/133
    [    5.397819] scsi 0:0:0:0: Direct-Access     ATA      ST5000LM000-2AN1 0001 PQ: 0 ANSI: 5
    [    5.398431] sd 0:0:0:0: [sda] 9767541168 512-byte logical blocks: (5.00 TB/4.54 TiB)
    [    5.398443] sd 0:0:0:0: [sda] 4096-byte physical blocks
    [    5.398631] sd 0:0:0:0: [sda] Write Protect is off
    [    5.398638] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [    5.398729] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [    5.446689] i2c: ret=-110
    [    5.461087]  sda: sda1
    [    5.462544] sd 0:0:0:0: [sda] Attached SCSI disk
    [    5.497697] i2c: ret=-110
    [    5.505117] ata2: SATA link down (SStatus 0 SControl 300)
    [    5.548697] i2c: ret=-110
    [    5.548709] Found: Slot 0, ID: 1b (by CA)
    [    5.548713] Empty Slot 1
    [    5.548718] Initializing adapter 0 (Si2169C-(null))
    [    5.551151] (NULL device *): DVB: registering adapter 0 frontend 0 (Si2166D)...
    [    5.551343] Initializing adapter 1 (Si2169C-(null))
    [    5.921645] EXT4-fs (sda1): recovery complete
    [    5.921673] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
    [    6.553139] (NULL device *): DVB: registering adapter 0 frontend 1 (Si2166D)...
    [    6.553478] input0 set to A
    [    6.553485] tsmux set tsports reg 00 to val 00
    [    6.554455] input1 set to B
    [    6.554467] tsmux set tsports reg 01 to val 01
    [    6.554890] input2 set to A1
    [    6.554897] tsmux set tsports reg 02 to val 0a
    [    6.555462] input3 set to A2
    [    6.555471] tsmux set tsports reg 03 to val 09
    [    6.555866] tsmux set cisource reg 06 to val 00
    [    6.556349] tsmux set ciclk reg 34 to val 00
    [    6.556750] tsmux set cisource reg 07 to val 01
    [    6.557328] tsmux set ciclk reg 34 to val 00
    [    6.559027] CI stopped...
    [    6.559547] CI stopped...
    [    6.560251] init ALSA!
    [    6.560737] registered vtuner misc/vtuner0, minor 49
    [    6.560839] registered vtuner misc/vtuner1, minor 48
    [    6.560930] registered vtuner misc/vtuner2, minor 47
    [    6.561016] registered vtuner misc/vtuner3, minor 46
    [    6.561023] HDMI-RX: init
    [    6.561868] HDMI-RX: no device attached
    [    6.561922] HDMI-RX: video format change event
    [    6.561928] HDMI-RX: hdmi packet status stopped
    [    6.561935] HDMI-RX: hdmiInput0 Receiving DVI  format 
    [    6.561940] HDMI-RX: hdmiInput0 Color Space change from '' to ''
    [    6.561974] HDMI-RX: init done
    [    6.561981] bcm_vce_init()
    [    6.561986] bcm_vce_init() 0
    [    6.585244] vice0: allocate output buffers
    [    6.592484] input: dreambox ir keyboard as /devices/virtual/input/input3
    [    6.592738] input: dreambox ir mouse as /devices/virtual/input/input4
    [    6.597836] ble init (0)
    [    6.598177] input: dreambox remote control (bluetooth le) as /devices/virtual/input/input5
    [    7.093113] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
    [    7.095263] f0b00000.ethernet: configuring instance for internal PHY
    [    7.095364] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [    7.863545] r8712u 3-1:1.0 wlan0: 1 RCR=0x153f00e
    [    7.865221] r8712u 3-1:1.0 wlan0: 2 RCR=0x553f00e
    [    7.971494] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
    [    8.407087] si2183(0): DVB-S(2) voltage disabled now
    [    8.408557] si2183(0): DVB-S(2) voltage disabled now
    [    8.411462] si2183(1): DVB-S(2) voltage disabled now
    [    8.412916] si2183(1): DVB-S(2) voltage disabled now
    [    8.421170] HDMI: CEC device open ... state is 3, flushed 2 old messages from RX fifo
    [    8.421268] HDMI: CEC set devtype to 0
    [    8.421277] HDMI: CEC start ... state is now 1
    [    8.421306] HDMI: CEC returned state 1
    [    8.421313] HDMI: CEC state now 801
    [    8.484297] HDMI: CEC use logical address 3
    [    8.484318] HDMI: CEC init completed... state is now 3!
    [    8.509437] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [    8.621022] HDMI: CEC send ok!
    [    8.774366] HDMI: CEC recv ok!
    [    8.842484] HDMI: CEC recv ok!
    [    9.099253] libphy: f0b00000.etherne:01 - Link is Down
    [    9.287877] 0 ms: 
    [    9.321127] 34 ms: 0
    [    9.326373] 5 ms: 0
    [    9.331012] 4 ms: 0
    [    9.628754] tsmux set cisource reg 06 to val 0a
    [    9.630224] tsmux set cisource reg 07 to val 0a
    [    9.645252] 315 ms: 0
    [    9.668692] 23 ms: 6
    [    9.674633] 6 ms: 6
    [    9.675780] 1 ms: 6
    [    9.682778] 7 ms: 6
    [    9.752486] 70 ms: 6
    [    9.839396] 87 ms: 8
    [    9.860441] 21 ms: 9
    [    9.863240] 3 ms: 9
    [    9.864039] 0 ms: 9
    [    9.865152] 2 ms: 9
    [   10.390123] 525 ms: 9
    [   10.392795] 2 ms: 18
    [   10.431872] 39 ms: 18
    [   10.433929] 2 ms: 19
    [   10.459958] 26 ms: 19
    [   10.504432] 45 ms: 20
    [   10.505606] 1 ms: 20
    [   10.512682] 7 ms: 20
    [   10.513776] 1 ms: 20
    [   10.514895] 1 ms: 20
    [   10.520204] 6 ms: 20
    [   10.525793] 5 ms: 21
    [   10.590977] change audioenc bitrate to 256000 bits/s
    [   10.592764] vice0: change videoenc bitrate to 6000000 bits/s
    [   10.592777] change audioenc bitrate to 128000 bits/s
    [   10.604796] vice0: change gop length to 0ms
    [   10.604808] vice0: allow new gop on new scene off
    [   10.604815] vice0: change open gop to off
    [   10.604820] vice0: change p-frames to 4
    [   10.604826] vice0: change b-frames to 2
    [   10.604833] vice0: change to 0 slices per pic
    [   10.604917] vice0: change h264 profile to main
    [   10.604926] vice0: change h264 level to 3.1
    [   10.696541] EXT4-fs (mmcblk0p3): recovery complete
    [   10.697828] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
    [   10.714670] 189 ms: 21
    [   10.715950] 1 ms: 24
    [   10.956695] 241 ms: 24
    [   10.964373] 8 ms: 28
    [   10.969168] 5 ms: 28
    [   10.973425] 4 ms: 28
    [   10.974524] 1 ms: 28
    [   10.975956] 1 ms: 28
    [   10.979315] 4 ms: 28
    [   10.980459] 1 ms: 28
    [   10.995172] 15 ms: 28
    [   11.903019] 907 ms: 28
    [   11.923502] 21 ms: 44
    [   11.924742] 1 ms: 44
    [   11.938205] 14 ms: 44
    [   11.939469] 1 ms: 45
    [   11.940628] 1 ms: 45
    [   11.942978] 2 ms: 45
    [   11.947364] 5 ms: 45
    [   11.954807] 7 ms: 45
    [   11.956010] 1 ms: 45
    [   12.020322] bcmfb: creating surface with pixel format 0x07c68888 (BPXL_eA8_B8_G8_R8)
    [   12.083848] 128 ms: 45
    [   12.184963] 101 ms: 47
    [   12.187962] set input to 0
    [   12.187971] set fb to 2(-1)
    [   12.187981] set current avs auto aspect to 16:9
    [   12.188008] set sb to 3(1)
    [   12.188986] set ac3 to downmix
    [   12.189526] set ac3plus to use_hdmi_caps
    [   12.191558] using 50.00Hz as MonitorRefreshRate
    [   12.191574] VIDEO1: shared window not available
    [   12.191609] SET FORMAT: display[0], format='1080p50'
    [   12.191621] VIDEO1: shared window not available
    [   12.308199] set current avs auto aspect to 16:9
    [   12.308227] set sb to 3(1)
    [   12.388225] using 50.00Hz as MonitorRefreshRate
    [   12.388238] VIDEO1: shared window not available
    [   12.388261] SET FORMAT: display[0], format='1080p50'
    [   12.388270] VIDEO1: shared window not available
    [   12.508186] set current avs auto aspect to 16:9
    [   12.508211] set sb to 3(1)
    [   12.508658] 324 ms: 49
    [   12.511945] 3 ms: 54
    [   12.514732] 3 ms: 54
    [   12.560027] 45 ms: 54
    [   12.564073] 4 ms: 55
    [   13.133470] set ac3plus to hdmi_best
    [   13.133613] set dtshd to hdmi_best
    [   13.133716] set aac to hdmi_best
    [   13.133812] set wmapro to hdmi_best
    [   13.382662] systemd-fstab-generator[363]: Checking was requested for "rootfs", but it is not a device.
    [   14.143486] set current avs auto aspect to 16:9
    [   14.143525] set sb to 3(1)
    [   14.143712] set current avs auto aspect to 16:9
    [   14.143736] set sb to 3(1)
    [   14.143885] set current avs auto aspect to 16:9
    [   14.143908] set sb to 3(1)
    [   14.150159] set current avs auto aspect to 16:9
    [   14.150190] set sb to 3(1)
    [   14.151414] set current avs auto aspect to 16:9
    [   14.151440] set sb to 3(1)
    [   14.153771] set current avs auto aspect to 16:9
    [   14.153815] set sb to 3(1)
    [   14.160674] set current avs auto aspect to 16:9
    [   14.160711] set sb to 3(1)
    [   14.160840] set current avs auto aspect to 16:9
    [   14.160858] set sb to 3(1)
    [   14.160953] set current avs auto aspect to 16:9
    [   14.160968] set sb to 3(1)
    [   14.163765] set current avs auto aspect to 16:9
    [   14.163799] set sb to 3(1)
    [   14.163902] set current avs auto aspect to 16:9
    [   14.163916] set sb to 3(1)
    [   14.169354] set current avs auto aspect to 16:9
    [   14.169396] set sb to 3(1)
    [   14.169512] set current avs auto aspect to 16:9
    [   14.169529] set sb to 3(1)
    [   14.170523] set current avs auto aspect to 16:9
    [   14.170553] set sb to 3(1)
    [   14.213692] 1650 ms: 55
    [   14.217516] tsmux set ciclk reg 34 to val 00
    [   14.218603] tsmux set ciclk reg 34 to val 00
    [   14.227590] 14 ms: 83
    [   14.847868] 620 ms: 83
    [   15.146024] 298 ms: 94
    [   15.161896] set mute 0 1
    [   15.162982] 17 ms: 99
    [   15.167586] 5 ms: 100
    [   15.193170] input0 set to A1
    [   15.193182] tsmux set tsports reg 00 to val 0a
    [   15.195618] start PCR0 on dmx 0 pid:3d5 index 3
    [   15.195805] start AUDIO0 on dmx 0 pid:3d6 index 1
    [   15.195812] audio ch0: xpt start
    [   15.195822] audio ch0: reset GA threshold to 8ms
    [   15.195839] sync0 is off so we enable it
    [   15.195846] sync0: allocated pcroffset 0
    [   15.195858] sync0: demux-index 0 pcr pid 3d5
    [   15.195872] sync0: using 3 as pcr pidchannel
    [   15.195891] audio ch0: MPEG
    [   15.195896] audio ch0: streamtype set 0
    [   15.195901] audio ch0: streamtype_set: stop rave
    [   15.195929] audio ch0: add stereo input to mixer DAC
    [   15.195950] audio ch0: add stereo input to mixer SPDIF
    [   15.195964] audio ch0: add stereo input to mixer MAI
    [   15.195976] audio ch0: mai sample rate changed isr (48000)
    [   15.196018] audio ch0: streamtype_set: restart rave
    [   15.196140] audio ch0: decoder start
    [   15.196153] audio ch0: video delay 0 (0 ms)
    [   15.196163] VIDEO0: total delay: 0 (0 ms)
    [   15.197395] start VIDEO0 on dmx 0 pid:3d5 index 3
    [   15.197434] VIDEO0: total delay: 0 (0 ms)
    [   15.202609] VIDEO0: start decode
    [   15.206809] HDMI: CEC returned state 3
    [   15.206818] HDMI: CEC state now 803
    [   15.426148] si2183(0): changed returnloss
    [   15.426163] si2183(0): start tune freq 682000000, bw 8000000, delsys 3, plp_id -1
    [   15.619919] HDMI: CEC send ok!
    [   15.737112] HDMI: CEC send ok!
    [   15.790628] si2183(0): found carrier after 597 ms
    [   15.811638] si2183(0): final lock after 618 ms
    [   15.880691] audio ch0: first pts 0x16e36, stc 0x14892, pcr valid
    [   15.903111] audio ch0: lock
    [   15.903152] audio ch0: sample rate changed isr (48000)
    [   15.943153] HDMI: CEC recv ok!
    [   16.031601] HDMI: CEC send ok!
    [   16.032433] audio ch0: status ready isr
    [   16.133702] HDMI: CEC send ok!
    [   16.250909] HDMI: CEC send ok!
    [   16.338040] HDMI: CEC recv ok!
    [   16.344320] VIDEO0: first pts 0x26d96
    [   16.344350] VIDEO0: resolution changed (720 576)
    [   16.402055] HDMI: CEC send ok!
    [   16.494113] VIDEO0: enable tsm
    [   16.609106] HDMI: CEC recv ok!
    [   16.724625] HDMI: CEC send ok!
    [   16.954683] HDMI: CEC recv ok!
    [   17.224289] VIDEO0: progressive changed (0)
    [   17.246696] HDMI: CEC recv ok!
    [   17.468302] HDMI: CEC recv ok!
    [   17.682541] HDMI: CEC recv ok!
    [   17.945582] HDMI: CEC recv ok!
    [   18.417512] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
    [   19.060064] HDMI: CEC recv ok!
    [   19.286818] HDMI: CEC recv ok!
    [   19.423064] HDMI: CEC recv ok!
    [   19.717512] HDMI: CEC recv ok!
    [   19.929337] HDMI: CEC recv ok!
    [   20.397565] HDMI: now connected
    [   20.425738] HDMI: CEC Physical Addr 1.3.0.0 set from EDID
    [   20.425748] HDMI: EDID read ok
    [   20.425794] using 50.00Hz as MonitorRefreshRate
    [   20.425805] VIDEO1: shared window not available
    [   20.425829] SET FORMAT: display[0], format='1080p50'
    [   20.425838] HDMI mode
    [   20.425842] use EDID to detect colorspace
    [   20.425846] preferred colorspace: Itu_R_BT_709
    [   20.425849] using 8bit output
    [   20.628711] VIDEO1: shared window not available
    [   20.628792] set current avs auto aspect to 16:9
    [   20.628950] set sb to 3(1)
    [   20.689696] HDMI: CEC recv ok!
    [   21.382364] HDMI: CEC recv ok!
    [   21.447355] HDMI: CEC recv ok!
    [   22.077186] HDMI: CEC recv ok!
    [   22.141459] HDMI: CEC recv ok!
    [   22.278951] HDMI: CEC send ok!
    [   22.406545] HDMI: CEC send ok!
    [   22.844196] HDMI: CEC send ok!
    [   22.979934] HDMI: CEC recv ok!
    [   23.042273] HDMI: CEC recv ok!
    [   23.416578] HDMI: CEC recv ok!
    [   23.605189] HDMI: CEC send ok!
    [   23.666664] HDMI: CEC recv ok!
    [   23.825289] HDMI: CEC send ok!
    [   24.019016] HDMI: CEC recv ok!
    [   26.753351] HDMI: CEC recv ok!
    [   26.759546] set mute 1 1
    [   26.768475] stop PCR0 on dmx 0 pid:3d5
    [   26.768560] stop VIDEO0 on dmx 0 pid:3d5
    [   26.769215] VIDEO0: stop decode
    [   26.769351] VIDEO0: set blank to 1
    [   26.769458] audio ch0: decoder stop
    [   26.779667] stop AUDIO0 on dmx 0 pid:3d6
    [   26.779675] audio ch0: xpt stop
    [   26.779684] sync0 1fff no decoder left in sync handling so disable
    [   26.779689] sync0: was last pcroffset0 user so free it
    [   26.780163] set input to 1
    [   26.780170] set fb to 2(0)
    [   26.808451] set sb to 3(0)
    [   31.810649] HDMI: CEC recv ok!
    [   32.789641] si2183(0): DVB-S(2) voltage disabled now
    [   64.122695] change audioenc bitrate to 256000 bits/s
    [   64.123698] vice0: change videoenc bitrate to 6000000 bits/s
    [   64.123711] change audioenc bitrate to 128000 bits/s
    [   64.125278] vice0: change gop length to 0ms
    [   64.125291] vice0: allow new gop on new scene off
    [   64.125297] vice0: change open gop to off
    [   64.125302] vice0: change p-frames to 4
    [   64.125308] vice0: change b-frames to 2
    [   64.125314] vice0: change to 0 slices per pic
    [   64.125379] vice0: change h264 profile to main
    [   64.125387] vice0: change h264 level to 3.1
    root@dm920:~#

  3. #23
    Advanced
    Join Date
    Apr 2017
    Posts
    69
    Post Thanks / Like
    Rep Power
    3

    Default Re: Nuova immagine Dream ELITE 14/10/2018 e drivers chiavette Wifi

    Penso che quello che vi interessi nel log sia questo:

    Bus 004 Device 002: ID 0bda:b812

    [ 0.805281] usb 4-1: New USB device found, idVendor=0bda, idProduct=b812
    [ 0.805291] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
    [ 0.805299] usb 4-1: Product: USB3.0 802.11ac 1200M Adapter
    [ 0.805305] usb 4-1: Manufacturer: Realtek
    [ 0.805309] usb 4-1: SerialNumber: 123456

    Riuscite a impletementare questa chiavetta prima di Natale?
    Mi fareste un ENORME regalo!

    Ho visto che su GITHUB ci sono gli ultimi drivers linux.

    Forse saró il primo a testare una chiavetta con standard AC anche se non ho capito come fará il DREAMBOX a scegliere tra Wifi 2.4 e 5GHz.

    Ovviamente se potete date prioritá al 5Ghz!

    Grazie!

  4. #24
    Advanced
    Join Date
    Apr 2017
    Posts
    69
    Post Thanks / Like
    Rep Power
    3

    Default Re: Nuova immagine Dream ELITE 14/10/2018 e drivers chiavette Wifi

    Novitá?

    deskjet?
    makiaveli?

    E' possibile inserire i drivers di questa chiavetta in Engima2?

    Grazie

    Ciao!

  5. #25
    Administrator makaveli's Avatar
    Join Date
    Jul 2016
    Posts
    759
    Post Thanks / Like
    Rep Power
    10

    Default AW: Nuova immagine Dream ELITE 14/10/2018 e drivers chiavette Wifi

    Vediamo cosa possiamo fare
    Dream-Elite Donation - Thanks for your support

  6. Thanks Venturer thanked for this post
  7. #26
    Advanced
    Join Date
    Apr 2017
    Posts
    69
    Post Thanks / Like
    Rep Power
    3

    Default Re: AW: Nuova immagine Dream ELITE 14/10/2018 e drivers chiavette Wifi

    Quote Originally Posted by makaveli View Post
    Vediamo cosa possiamo fare
    Grazie makaveli!

    Sei e siete dei grandi! La migliore immagine Dreambox di sempre!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •