Page 9 of 13 FirstFirst ... 5678910111213 LastLast
Results 81 to 90 of 122

Thread: UPDATE: Enigma2

  1. #81
    Elite Vip mr.strauss's Avatar
    Join Date
    Nov 2011
    Posts
    2,702
    Post Thanks / Like
    Rep Power
    13

    Default AW: UPDATE: Enigma2

    Enigma2 4.3.1r1
    4.3.1r1
    - video encoder
    - added advanced settings for better quality with same bitrate
    - allow to configure number of B-Frames (0 and 2 is valid)
    - allow to configure number of P-Frames in range 0 .. 14 (only when no GOP length is set)
    - allow to set a GOP Length in range 0 to 65535 ms
    - allow to enable open GOP support
    - allow to enable "new gop on scene change" when no B-Frames are used
    - added more framerates

    - fixed frequently lost root filesystem entry in fstab
    - added/fixed some key mappings for CEC

    - added some basic snr calculation for satip-client (must be supported by the server!)
    - better readable debug output for SEC / frontend
    - switched Durline Dur-DCR5-1-8(L4/K) to Unicable 1 instead of Unicable2/JESS
    - take care of "use increased voltage" settings even for unicable
    - added on-the-fly tuner mode switching between cable/sat/terrestrial on channel change
    - allow to link from tuner A1 to A2 and vice versa
    - transponder searching
    - add and prefer auto modulation handling in manual scan for DVB-C when possible
    - add and prefer auto fec and auto modulation handling in manual scan when possible
    - detect ac3+ audio streams as audio streams in pat scan
    - take care of multi-type tuners in automatic scan

    - skin / OSD
    - fixed skin zPosition reset when none has been given as keyword-arg
    - use triple buffering for smoother osd
    - menu: use 256x256 instead of 24x24 as default size for menu svg's (this fixes heavy upscaling on png->svg fallback)
    - set start-up resolution to 1280x720 to match the default skin
    - add scale-type stretch where needed (PluginBrowser and some other places)
    - implement "color defined borders".
    - instead of "filename=" you can use "color=" and "size=" where size defines:
    - the height for top/bottom
    - the width for left/right and corners
    - corner height is defined by top/bottom height
    - example:
    * <pixmap pos="bpTopLeft" color="#44FF0000" size="10"/> => top left corner, transparent red, 10 pixels wide
    * <pixmap pos="bpTop" color="#4400FF00" size="40" /> => top border, transparent green, height 40 pixels, top corners inherit the height of 40 pixels
    * repeat for all borders or skip what shouldn't be around
    - you can mix pixmap and color based borders
    - color based borders would be painted atop pixmap based borders if both are defined (you could probably apply tinting to neutral and simple pixmaps using that technique)
    - added some options for ePixmap.setScale(...) and scale= in skins, fix code-bugs related to setScale, too (it's no immediate, some broken things have been removed)
    - ePixmap.SCALE_TYPE_NONE: "off" / "none" in skins
    - ePixmap.SCALE_TYPE_ASPECT: "on" / "aspect" in skins
    - ePixmap.SCALE_TYPE_CENTER: "center" in skins
    - ePixmap.SCALE_TYPE_WIDTH: "width" in skins
    - ePixmap.SCALE_TYPE_HEIGHT: "height" in skins
    - fixed redraw after failed mode change in VideoSetup
    - fixed several Widget Animation issues
    - fixed enabling animations when disabled at boot time
    - fixed display animations not working without OSD widget animations being enabled

    - read and use /proc/stb/lcd/colorformat if exists ... only RGB_565_LE and RGB_565_BE are supported yet, RGB_565_BE is default for 16bpp when no proc entry exists..

    git.opendreambox.org Git - enigma2.git/commit


    !!! No support via PN !!!

  2. Thanks bic@ thanked for this post
    Likes bic@ liked this post
  3. #82
    Elite Vip mr.strauss's Avatar
    Join Date
    Nov 2011
    Posts
    2,702
    Post Thanks / Like
    Rep Power
    13

    Default AW: UPDATE: Enigma2

    Update 10/04/2017
    enigma2: 4.3.1r2

    enigma2: 4.3.1r2
    General:
    - fixed spinners not working in some cases
    - fixed teletext spamming the logfile (stuffing bytes)
    - mount dreambox-data partition to /data if available
    - look for picons in /data/picon, too
    - fixed display-screenshots

    Tuners:
    - fixed unavailability of network scan
    - fixed tuner defaults for single C/T tuners and multitype C/T tuners
    - fixed handling of DVB-T2 PLP IDs (fixes missing freenet-tv services)
    - fixed a bunch of minor usability and cosmetical flaws in tuner related dialogs
    - improved debug output during scan
    - allow auto modulation for all Si216x based frontends in manual scan

    Other:
    - NimManager: re-add deprecated "getNimType" method
    - ePicLoad: fixed flawed svg detection logic
    http://git.opendreambox.org/?p=opend...8ee2434cc0e2b6


    !!! No support via PN !!!

  4. #83
    Elite Vip mr.strauss's Avatar
    Join Date
    Nov 2011
    Posts
    2,702
    Post Thanks / Like
    Rep Power
    13

    Default AW: UPDATE: Enigma2

    Update 10/04/2017
    dm900, dm7080, dm820 hardware drivers

    update dm900, dm7080, dm820 hardware drivers
    - opengl fixes
    - si2169X: fixed PLPID read out, fixed TS output on transponders with very low bitrate
    - si2166b: lower signal drop on first channel after second channel use
    git.opendreambox.org Git - opendreambox.git/commit


    !!! No support via PN !!!

  5. #84
    Elite Vip mr.strauss's Avatar
    Join Date
    Nov 2011
    Posts
    2,702
    Post Thanks / Like
    Rep Power
    13

    Default AW: UPDATE: Enigma2

    Update 10/04/2017

    enigma2_4.3.1r2
    enigma2_4.3.1r2: add patch needed to compile c++ plugins
    git.opendreambox.org Git - opendreambox.git/commit

    enigma2: remove old unneeded patches for 4.3.1r1
    git.opendreambox.org Git - opendreambox.git/commit


    update dm7080 hardware drivers (frontend / demux was broken in 20170409)
    git.opendreambox.org Git - opendreambox.git/commit


    !!! No support via PN !!!

  6. #85
    Elite Vip mr.strauss's Avatar
    Join Date
    Nov 2011
    Posts
    2,702
    Post Thanks / Like
    Rep Power
    13

    Default AW: UPDATE: Enigma2

    Update 25/04/2017

    Enigma2 Update
    4.3.1r3
    - added Durline UCP20 V2 (with different SCR frequencies) to supported unicable switches
    - increase unicable delay after switch command
    - ServiceList: refresh every full minute while open
    - GraphMultiEpg: fixed wrong prime time (patch from dre ... thanks!)
    - VirtualKeyboard: fixed layouts with more than 5 lines and add ru_RU
    - CeC:
    - minor fixes
    - fixed "tv power on" detection in some cases (Samsung and probably others, too)
    - added reset option to CeC-Setup, set's all options to default
    - fixed bus errors when trying to acces files on dead storage (e.g. network mounts)
    - fixed some issues with widget animation enabling/disabling
    - fixes broken "blinking" and
    - fixes custom animations for widgets when defaults are disabled
    - properly fixed issues with eListBoxPythonMultiContent and animations
    - raise RLIMIT_NOFILE to 8k min (soft & hard) on enigma2 startup
    (fixes ION-related crashes when a lot of pixmaps are being cached/held)
    - restate some strings

    git.opendreambox.org Git - enigma2.git/commit

    update dm820/dm7080 hardware drivers

    update dm820/dm7080 hardware drivers
    - CEC:
    - add some debug output and make debug output better readable
    - some CEC fixes and improvements
    - si2166b/si2169c:
    - add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
    - fixed possible deadlock on blindscan
    - si2166b: firmware update
    - si2169c:
    - fixed DVB-T(2) 5V switching
    - add better readable debug output
    - disable 5V when tuner switches to sleep
    - fixed possible rf_switching problem

    git.opendreambox.org Git - opendreambox.git/commit

    update dm52x/dm900 hardware drivers

    update dm52x/dm900 hardware drivers
    - CEC:
    - add some debug output and make debug output better readable
    - fixed lame CEC bus in standby
    - some CEC fixes and improvements
    DM900:
    - si2166b/si2169c:
    - add auto DVB-S/DVB-S2 delivery system handling (like DVB-T/T2)
    - fixed possible deadlock on blindscan
    - si2166b: firmware update
    - si2169c:
    - fixed DVB-T(2) 5V switching
    - add better readable debug output
    - disable 5V when tuner switches to sleep
    - fixed possible rf_switching problem

    git.opendreambox.org Git - opendreambox.git/commit


    !!! No support via PN !!!

  7. Thanks Devilcards.de®, accept thanked for this post
  8. #86
    Elite Vip mr.strauss's Avatar
    Join Date
    Nov 2011
    Posts
    2,702
    Post Thanks / Like
    Rep Power
    13

    Default AW: UPDATE: Enigma2

    Update II 26/04/2017

    update dm900,dm820,dm7080 hardware drivers (fixed crash on boot with plugged Si2169-C Dual C/T2 tuner)
    git.opendreambox.org Git - opendreambox.git/commit


    !!! No support via PN !!!

  9. Likes accept liked this post
  10. #87
    Elite Vip mr.strauss's Avatar
    Join Date
    Nov 2011
    Posts
    2,702
    Post Thanks / Like
    Rep Power
    13

    Default enigma2: update to 4.3.1r4

    Update 01/05/2017

    enigma2: update to 4.3.1r4

    - fixed some listbox problems (since 4.3.1r3)
    - fixed crash in manual scan (since 4.3.1r3)
    - fixed memory leak (since 4.3.1r3)
    - fixed tuner config problems ... sometimes the SCR was not stored per LNB
    git.opendreambox.org Git - enigma2.git/commit


    !!! No support via PN !!!

  11. Thanks deskjet® thanked for this post
  12. #88
    Elite Vip erminio's Avatar
    Join Date
    Jan 2010
    Posts
    274
    Post Thanks / Like
    Rep Power
    11

    Default Re: UPDATE: Enigma2

    enigma2: update to 4.3.1r5

    Update 20/05/2017

    enigma2: 4.3.1r5
    * updated all translations to latest pootle (2017-05-18)
    * fixed ATSC DDP (AC3+) detection (IPTV streams)
    * Scan/Tuners
    - fixed DVB-S2 FEC selection in manual scan
    - fixed some issues with DVB-S2 MIS/PLS code/mode handling
    - show auto FEC, auto modulation, PLS, MIS settings in satfinder and positioner setup
    - don't show DVB-S2 PLS/MIS settings/infos when the tuner does not support it
    - fixed tuning on APSK16/32 transponders in some cases
    - fixed DVB-T(2) 5V handling for combo tuners
    - added "rotor turning speed in degree" option for motor-driven antennas
    and use it for blindscan (to avoid foreign sat locks)
    - allow the same service on different frequencies for DVB-T(2)
    (for regions with multiple transmitters in reach)
    - PositionerSetup: fixed crash when no transponder is tuned
    * CeC: added very tiny vendor handler for Philips
    * Movie Player: added a minimum treshold before we consider resuming playback (configurable)
    * fixed broken IPv6 manual configuration
    * fixed database based cover arts not showing up in MediaCenter/Audio
    * fixed crash in MediaCenter/Video when switching between movies quickly (need some feedback on this)

    For Developers:
    * eServiceReference: fixed some issues with parsing of additional headers
    * stop generating and using the index-meta files in favor of building a full index on (softwaremanager) startup based on all available plugin meta files
    - fixes issues with "external" plugins in extension manager

  13. Thanks deskjet®, gim68, mr.strauss® thanked for this post
  14. #89
    Elite Vip mr.strauss's Avatar
    Join Date
    Nov 2011
    Posts
    2,702
    Post Thanks / Like
    Rep Power
    13

    Default AW: UPDATE: Enigma2

    Update 20/05/2017

    dreambox-dvb-modules: update hardware drivers for dm900, dm820, dm7080
    - silabs based tuners:
    - improved combo tuner detection (dm820/dm7080)
    - longer tune timeout when the symbolrate is lower 1000 (DVB-S/S2)
    only interesting for channel searching
    - dont return outdated SNR values until demod has no carrier lock
    - add debug output for carried/final lock and timeout
    git.opendreambox.org Git - opendreambox.git/commit

    gst-plugins-base: enable subtitle support for H265 content... thanks to engycz
    git.opendreambox.org Git - opendreambox.git/commit


    !!! No support via PN !!!

  15. Thanks erminio® thanked for this post
  16. #90
    Elite Vip mr.strauss's Avatar
    Join Date
    Nov 2011
    Posts
    2,702
    Post Thanks / Like
    Rep Power
    13

    Default AW: UPDATE: Enigma2

    Update 21/05/2017

    enigma2: 4.3.1r6
    - fixed DVB-T(2) namespace problem introduced in 4.3.1r5
    - fixed satfinder crash on change from predefined to manuel transponder
    introduced in 4.3.1r5
    - allow to input DVB-S(2) frequencies with one decimal place
    needed to lock transponders with very low symbol rates

    git.opendreambox.org Git - enigma2.git/commit


    !!! No support via PN !!!

  17. Thanks erminio® thanked for this post

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •