Page 6 of 7 FirstFirst ... 234567 LastLast
Results 51 to 60 of 61

Thread: Richiesta driver DVB-T (DTT) per DE4.0R005

  1. #51
    Newbie
    Join Date
    Nov 2013
    Posts
    10
    Post Thanks / Like
    Rep Power
    0

    Default Re: Avermedia 1835

    Quote Originally Posted by lamero View Post
    Dopo insmod dai:
    Code:
    dmesg
    ecco l'output:
    [ 21.264000] sync is off so we enable it
    [ 21.264000] playback!
    [ 21.265000] total video delay: 0 (0 ms)
    [ 21.269000] VIDEO0: start decode
    [ 21.270000] flush video decoder
    [ 21.309000] VIDEO0: first pts 0x0
    [ 21.309000] VIDEO0: framerate changed 3
    [ 21.309000] VIDEO0: resolution changed (1280 720)
    [ 21.310000] VIDEO0: aspect changed 3
    [ 21.311000] set current avs auto aspect to 16:9
    [ 21.311000] disable wss on display 0
    [ 21.312000] disable wss on display 1
    [ 21.312000] set current avs auto aspect to 16:9
    [ 21.313000] disable wss on display 0
    [ 21.313000] disable wss on display 1
    [ 21.314000] set sb to 3(1)
    [ 21.426000] VIDEO0: set blank to 0
    [ 21.428000] VIDEO0: stop decode
    [ 21.428000] VIDEO0: set blank to 0
    [ 21.429000] no decoder left in sync handling so disable xpt_sync
    [ 22.965000] JFFS2 notice: (54) check_node_data: wrong data CRC in data n
    t 0x034ceaf8: read 0xd52fd42a, calculated 0x899eaccf.
    [ 23.935000] input: dreambox remote control (native) as /devices/virtual/
    /input1
    [ 23.937000] input: dreambox advanced remote control (native) as /devices
    ual/input/input2
    [ 23.945000] input: dreambox ir keyboard as /devices/virtual/input/input3
    [ 23.959000] input: dreambox ir mouse as /devices/virtual/input/input4
    [ 23.967000] 4018934 ms:
    [ 24.049000] 81 ms: 14
    [ 24.733000] kjournald starting. Commit interval 5 seconds
    [ 24.738000] EXT3-fs (sda1): using internal journal
    [ 24.738000] EXT3-fs (sda1): recovery complete
    [ 24.744000] EXT3-fs (sda1): mounted filesystem with writeback data mode
    [ 24.757000] 707 ms: 16
    [ 25.223000] 465 ms: 18
    [ 25.291000] 68 ms: 20
    [ 25.331000] 40 ms: 22
    [ 28.344000] 3013 ms: 24
    [ 28.385000] 40 ms: 26
    [ 28.453000] 67 ms: 28
    [ 28.504000] 51 ms: 30
    [ 29.056000] 551 ms: 33
    [ 29.134000] 78 ms: 34
    [ 30.049000] 915 ms: 36
    [ 30.133000] 84 ms: 38
    [ 30.189000] 56 ms: 40
    [ 30.273000] 83 ms: 42
    [ 30.418000] 145 ms: 44
    [ 30.927000] 509 ms: 45
    [ 30.958000] 31 ms: 47
    [ 31.039000] VIDEO0: set blank to 0
    [ 31.040000] sync is off so we enable it
    [ 31.041000] playback!
    [ 31.041000] total video delay: 0 (0 ms)
    [ 31.045000] VIDEO0: start decode
    [ 31.046000] flush video decoder
    [ 31.088000] VIDEO0: first pts 0x0
    [ 31.203000] VIDEO0: set blank to 0
    [ 31.204000] VIDEO0: stop decode
    [ 31.205000] VIDEO0: set blank to 0
    [ 31.205000] no decoder left in sync handling so disable xpt_sync
    [ 51.518000] JFFS2 notice: (213) check_node_data: wrong data CRC in data
    at 0x03a56878: read 0x328c4c1c, calculated 0xd4f429c6.
    [ 54.901000] bcmfb: enable manual blit
    [ 54.924000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_e
    _G8_B8)
    [ 55.410000] alps_bsbe2 is in powersave mode now
    [ 56.017000] 25058 ms: 49
    [ 56.049000] 31 ms: 50
    [ 56.068000] 19 ms: 50
    [ 56.078000] 10 ms: 50
    [ 57.198000] 1120 ms: 50
    [ 58.395000] 1196 ms: 53
    [ 58.424000] 29 ms: 55
    [ 58.480000] 55 ms: 55
    [ 58.511000] 30 ms: 55
    [ 58.539000] 28 ms: 56
    [ 58.576000] 37 ms: 56
    [ 59.056000] 480 ms: 56
    [ 59.212000] 156 ms: 57
    [ 59.219000] 6 ms: 57
    [ 59.221000] 1 ms: 57
    [ 59.223000] 1 ms: 57
    [ 60.348000] 1124 ms: 57
    [ 60.377000] 28 ms: 60
    [ 60.509000] 132 ms: 60
    [ 60.811000] 302 ms: 60
    [ 60.840000] 28 ms: 61
    [ 60.856000] 16 ms: 61
    [ 60.858000] 2 ms: 61
    [ 60.860000] 2 ms: 61
    [ 60.876000] 16 ms: 61
    [ 60.901000] 24 ms: 61
    [ 61.718000] 816 ms: 61
    [ 61.749000] 30 ms: 63
    [ 61.864000] 115 ms: 63
    [ 62.247000] 382 ms: 64
    [ 62.306000] 59 ms: 64
    [ 62.352000] 46 ms: 65
    [ 62.354000] 1 ms: 65
    [ 62.358000] 3 ms: 65
    [ 62.373000] 15 ms: 65
    [ 64.484000] 2111 ms: 65
    [ 64.563000] 79 ms: 69
    [ 64.686000] 122 ms: 69
    [ 64.844000] 158 ms: 70
    [ 64.847000] 2 ms: 70
    [ 64.894000] 47 ms: 70
    [ 64.897000] 3 ms: 70
    [ 64.899000] 2 ms: 70
    [ 64.905000] 5 ms: 70
    [ 64.923000] 17 ms: 70
    [ 64.938000] 15 ms: 70
    [ 64.940000] 1 ms: 70
    [ 65.054000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_e
    _G8_B8)
    [ 65.708000] 767 ms: 70
    [ 65.835000] 127 ms: 72
    [ 65.869000] set current avs auto aspect to 4:3
    [ 65.869000] disable wss on display 0
    [ 65.870000] disable wss on display 1
    [ 65.870000] set sb to 3(2)
    [ 65.909000] set current avs auto aspect to 4:3
    [ 65.909000] disable wss on display 0
    [ 65.910000] disable wss on display 1
    [ 65.911000] set sb to 3(2)
    [ 65.913000] disable wss on display 0
    [ 65.913000] set wss 8 on display 1
    [ 65.950000] set input to 0
    [ 65.950000] set fb to 2(0)
    [ 65.951000] set current avs auto aspect to 4:3
    [ 65.951000] disable wss on display 0
    [ 65.952000] set wss 8 on display 1
    [ 65.953000] set sb to 3(2)
    [ 65.957000] set ac3 to downmix
    [ 65.960000] set ac3plus to use_hdmi_caps
    [ 65.967000] 132 ms: 72
    [ 66.002000] 35 ms: 73
    [ 66.007000] 4 ms: 73
    [ 66.243000] 236 ms: 73
    [ 66.246000] 3 ms: 73
    [ 66.297000] 50 ms: 73
    [ 71.948000] set current avs auto aspect to 16:9
    [ 71.949000] disable wss on display 0
    [ 71.950000] set wss 7 on display 1
    [ 71.950000] set sb to 3(1)
    [ 71.988000] set current avs auto aspect to 16:9
    [ 71.989000] disable wss on display 0
    [ 71.990000] set wss 7 on display 1
    [ 71.990000] set sb to 3(1)
    [ 71.991000] disable wss on display 0
    [ 71.992000] set wss 7 on display 1
    [ 71.993000] set current avs auto aspect to 16:9
    [ 71.994000] disable wss on display 0
    [ 71.994000] set wss 7 on display 1
    [ 71.994000] set sb to 3(1)
    [ 71.999000] set current avs auto aspect to 16:9
    [ 71.999000] disable wss on display 0
    [ 72.000000] set wss 7 on display 1
    [ 72.000000] set sb to 3(1)
    [ 72.002000] set current avs auto aspect to 16:9
    [ 72.003000] disable wss on display 0
    [ 72.003000] set wss 7 on display 1
    [ 72.004000] set sb to 3(1)
    [ 72.005000] disable wss on display 0
    [ 72.006000] set wss 7 on display 1
    [ 72.007000] set current avs auto aspect to 16:9
    [ 72.008000] disable wss on display 0
    [ 72.008000] set wss 7 on display 1
    [ 72.009000] set sb to 3(1)
    [ 72.013000] set current avs auto aspect to 16:9
    [ 72.014000] disable wss on display 0
    [ 72.014000] set wss 7 on display 1
    [ 72.015000] set sb to 3(1)
    [ 72.016000] set current avs auto aspect to 16:9
    [ 72.017000] disable wss on display 0
    [ 72.017000] set wss 7 on display 1
    [ 72.018000] set sb to 3(1)
    [ 72.019000] disable wss on display 0
    [ 72.019000] set wss 7 on display 1
    [ 72.020000] set current avs auto aspect to 16:9
    [ 72.021000] disable wss on display 0
    [ 72.021000] set wss 7 on display 1
    [ 72.022000] set sb to 3(1)
    [ 72.026000] set current avs auto aspect to 16:9
    [ 72.027000] disable wss on display 0
    [ 72.027000] set wss 7 on display 1
    [ 72.028000] set sb to 3(1)
    [ 72.029000] set current avs auto aspect to 16:9
    [ 72.030000] disable wss on display 0
    [ 72.030000] set wss 7 on display 1
    [ 72.031000] set sb to 3(1)
    [ 72.032000] disable wss on display 0
    [ 72.032000] set wss 7 on display 1
    [ 72.034000] set current avs auto aspect to 16:9
    [ 72.035000] disable wss on display 0
    [ 72.035000] set wss 7 on display 1
    [ 72.035000] set sb to 3(1)
    [ 72.049000] using 50.00Hz as MonitorRefreshRate
    [ 72.148000] SET FORMAT: display[0], format=27
    [ 72.149000] HDMI mode
    [ 72.149000] use EDID to detect colorspace
    [ 72.150000] using colorspace: 1
    [ 72.230000] bcm_video_analog_port_setup (fmt=7)
    [ 72.348000] SET FORMAT: display[1], format=7
    [ 72.468000] set current avs auto aspect to 16:9
    [ 72.469000] disable wss on display 0
    [ 72.470000] set wss 7 on display 1
    [ 72.471000] set sb to 3(1)
    [ 72.473000] set current avs auto aspect to 16:9
    [ 72.473000] disable wss on display 0
    [ 72.474000] set wss 7 on display 1
    [ 72.474000] set sb to 3(1)
    [ 72.480000] set current avs auto aspect to 16:9
    [ 72.480000] disable wss on display 0
    [ 72.481000] set wss 7 on display 1
    [ 72.481000] set sb to 3(1)
    [ 72.483000] set current avs auto aspect to 16:9
    [ 72.484000] disable wss on display 0
    [ 72.484000] set wss 7 on display 1
    [ 72.484000] set sb to 3(1)
    [ 72.486000] disable wss on display 0
    [ 72.487000] set wss 7 on display 1
    [ 72.488000] set current avs auto aspect to 16:9
    [ 72.489000] disable wss on display 0
    [ 72.489000] set wss 7 on display 1
    [ 72.490000] set sb to 3(1)
    [ 77.024000] 10727 ms: 73
    [ 77.056000] 32 ms: 98
    [ 77.064000] 7 ms: 98
    [ 77.709000] 645 ms: 98
    [ 77.795000] 86 ms: 99
    [ 77.830000] set mute 0 (000) 1
    [ 77.832000] 36 ms: 99
    [ 77.867000] 35 ms: 100
    [ 88.453000] alps_bsbe2 is in normal mode now
    [ 88.668000] CEC send ok!
    [ 88.778000] CEC send ok!
    [ 88.832000] unknown fec code: 0
    [ 88.861000] start pcr0 on dmx 3 pid:a6 index 5
    [ 88.863000] start audio on dmx 3 pid:1a8
    [ 88.863000] audio xpt start
    [ 88.864000] sync is off so we enable it
    [ 88.864000] demux-index 3 pcr0pid a6
    [ 88.865000] using 5 as pcr0 pidchannel
    [ 88.865000] MPEG
    [ 88.866000] audio: streamtype set 0
    [ 88.866000] audio: streamtype_set: stop rave
    [ 88.867000] audio: streamtype_set: restart rave
    [ 88.868000] set mute 0 (111) 1
    [ 88.869000] audio: decoder start 2
    [ 88.872000] video delay 0 (0 ms)
    [ 88.872000] total video delay: 0 (0 ms)
    [ 88.874000] start video0 on dmx 3 pid:a6
    [ 88.875000] total video delay: 0 (0 ms)
    [ 88.879000] VIDEO0: start decode
    [ 89.069000] RAP first pts 0x12a4aba56, stc 0x5ffdc80e, pcr valid
    [ 89.069000] audio_cdb_itb_error_isr! underflow
    [ 89.073000] audio_cdb_itb_error_isr! underflow
    [ 89.077000] audio_cdb_itb_error_isr! underflow
    [ 89.081000] audio_cdb_itb_error_isr! underflow
    [ 89.086000] audio_cdb_itb_error_isr! underflow
    [ 89.090000] audio_cdb_itb_error_isr! underflow
    [ 89.094000] audio_cdb_itb_error_isr! underflow
    [ 89.098000] audio_cdb_itb_error_isr! underflow
    [ 89.102000] audio_cdb_itb_error_isr! underflow
    [ 89.106000] audio_cdb_itb_error_isr! underflow
    [ 89.783000] ch0: lock
    [ 90.889000] VIDEO0: first pts 0x6000ede0
    [ 90.889000] VIDEO0: resolution changed (720 576)
    [ 90.890000] VIDEO0: progressive changed (0)
    [ 90.953000] unknown fec code: 0
    [ 91.041000] enable tsm0
    [ 390.710000] JFFS2 notice: (213) check_node_data: wrong data CRC in data
    at 0x03970da8: read 0xe7bc30bc, calculated 0x84037c48.
    [ 1811.028000] HDMI: now powered down
    [ 6030.054000] dvb_usb_it913x: version magic '3.12.1 mod_unload modversions
    32_R1 32BIT ' should be '3.2-dm800se SMP mod_unload MIPS32_R1 32BIT '
    [ 8983.811000] HDMI: force disconnect!
    [ 8983.811000] HDMI: now disconnected
    [ 8983.812000] HDMI: stop CEC
    [ 8983.813000] HDMI: now connected
    [ 8983.844000] HDMI: EDID read ok
    [ 8983.857000] using 50.00Hz as MonitorRefreshRate
    [ 8983.957000] SET FORMAT: display[0], format=27
    [ 8983.958000] HDMI mode
    [ 8983.959000] use EDID to detect colorspace
    [ 8983.959000] using colorspace: 1
    [ 8984.090000] bcm_video_analog_port_setup (fmt=7)
    [ 8984.197000] SET FORMAT: display[1], format=7
    [ 8984.317000] set current avs auto aspect to 16:9
    [ 8984.318000] disable wss on display 0
    [ 8984.318000] set wss 7 on display 1
    [ 8984.319000] HDMI: start CEC
    [ 8984.320000] set sb to 3(1)
    [ 8984.381000] HDMI: use logical CEC address 3
    [ 8984.519000] CEC send ok!
    [ 9111.711000] HDMI: now powered down
    root@dm800se:/lib/modules/3.2-dm800se/kernel/drivers/media/usb/dvb-usb-v2#

  2. #52
    Elite Vip
    Join Date
    Feb 2011
    Posts
    319
    Post Thanks / Like
    Rep Power
    9

    Default Re: Avermedia 1835

    Bisogna forzare il caricamento del modulo. Siccome busybox installato č vecchio, non permette il parametro -f a modprobe.
    Dammi tempo

  3. #53
    Newbie
    Join Date
    Nov 2013
    Posts
    10
    Post Thanks / Like
    Rep Power
    0

    Default Re: Avermedia 1835

    Quote Originally Posted by lamero View Post
    Bisogna forzare il caricamento del modulo. Siccome busybox installato č vecchio, non permette il parametro -f a modprobe.
    Dammi tempo
    ok grazie per ora

  4. #54
    Elite Vip
    Join Date
    Feb 2011
    Posts
    319
    Post Thanks / Like
    Rep Power
    9

    Default Re: Avermedia 1835

    Scompatta il file e mettilo nella directory /bin
    Dai questi comandi:
    Code:
    cd /bin
    chmod +x modprobe2
    modprobe2 -f dvb-usb-it913x
    Attached Files Attached Files

  5. #55
    Newbie
    Join Date
    Nov 2013
    Posts
    10
    Post Thanks / Like
    Rep Power
    0

    Default Re: Avermedia 1835

    Quote Originally Posted by lamero View Post
    Scompatta il file e mettilo nella directory /bin
    Dai questi comandi:
    Code:
    cd /bin
    chmod +x modprobe2
    modprobe2 -f dvb-usb-it913x
    Ciao comando preso, poi ho dato dmesg e questo č l'output:
    [ 20.807000] VIDEO0: framerate changed 3
    [ 20.807000] VIDEO0: resolution changed (1280 720)
    [ 20.808000] VIDEO0: aspect changed 3
    [ 20.826000] set current avs auto aspect to 16:9
    [ 20.827000] disable wss on display 0
    [ 20.827000] disable wss on display 1
    [ 20.828000] set current avs auto aspect to 16:9
    [ 20.829000] disable wss on display 0
    [ 20.829000] disable wss on display 1
    [ 20.830000] set sb to 3(1)
    [ 20.931000] VIDEO0: set blank to 0
    [ 20.932000] VIDEO0: stop decode
    [ 20.933000] VIDEO0: set blank to 0
    [ 20.933000] no decoder left in sync handling so disable xpt_sync
    [ 23.557000] input: dreambox remote control (native) as /devices/virtual/input
    /input1
    [ 23.560000] input: dreambox advanced remote control (native) as /devices/virt
    ual/input/input2
    [ 23.569000] input: dreambox ir keyboard as /devices/virtual/input/input3
    [ 23.574000] input: dreambox ir mouse as /devices/virtual/input/input4
    [ 23.590000] 4018557 ms:
    [ 23.599000] JFFS2 notice: (54) check_node_data: wrong data CRC in data node a
    t 0x034ceaf8: read 0xd52fd42a, calculated 0x899eaccf.
    [ 23.672000] 82 ms: 14
    [ 24.335000] kjournald starting. Commit interval 5 seconds
    [ 24.340000] EXT3-fs (sda1): using internal journal
    [ 24.340000] EXT3-fs (sda1): recovery complete
    [ 24.347000] EXT3-fs (sda1): mounted filesystem with writeback data mode
    [ 24.359000] 687 ms: 16
    [ 24.828000] 469 ms: 18
    [ 24.896000] 68 ms: 20
    [ 24.936000] 40 ms: 22
    [ 27.938000] 3002 ms: 24
    [ 27.979000] 40 ms: 26
    [ 28.047000] 67 ms: 28
    [ 28.099000] 52 ms: 30
    [ 28.649000] 550 ms: 33
    [ 28.729000] 80 ms: 34
    [ 29.642000] 913 ms: 36
    [ 29.724000] 82 ms: 38
    [ 29.781000] 57 ms: 40
    [ 29.866000] 85 ms: 42
    [ 30.009000] 143 ms: 44
    [ 30.535000] 526 ms: 45
    [ 30.567000] 31 ms: 47
    [ 30.646000] VIDEO0: set blank to 0
    [ 30.647000] sync is off so we enable it
    [ 30.648000] playback!
    [ 30.648000] total video delay: 0 (0 ms)
    [ 30.653000] VIDEO0: start decode
    [ 30.654000] flush video decoder
    [ 30.687000] VIDEO0: first pts 0x0
    [ 30.812000] VIDEO0: set blank to 0
    [ 30.813000] VIDEO0: stop decode
    [ 30.813000] VIDEO0: set blank to 0
    [ 30.814000] no decoder left in sync handling so disable xpt_sync
    [ 52.069000] JFFS2 notice: (210) check_node_data: wrong data CRC in data node
    at 0x03a56878: read 0x328c4c1c, calculated 0xd4f429c6.
    [ 54.519000] bcmfb: enable manual blit
    [ 54.539000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8
    _G8_B8)
    [ 55.058000] alps_bsbe2 is in powersave mode now
    [ 55.652000] 25085 ms: 49
    [ 55.681000] 29 ms: 50
    [ 55.703000] 21 ms: 50
    [ 55.713000] 9 ms: 50
    [ 56.782000] 1069 ms: 50
    [ 57.892000] 1110 ms: 52
    [ 57.923000] 31 ms: 55
    [ 57.978000] 55 ms: 55
    [ 58.009000] 31 ms: 55
    [ 58.011000] 2 ms: 55
    [ 58.047000] 36 ms: 55
    [ 58.531000] 484 ms: 55
    [ 58.696000] 164 ms: 56
    [ 58.729000] 33 ms: 57
    [ 58.731000] 1 ms: 57
    [ 58.734000] 2 ms: 57
    [ 59.861000] 1126 ms: 57
    [ 59.890000] 29 ms: 59
    [ 60.021000] 131 ms: 59
    [ 60.365000] 343 ms: 60
    [ 60.394000] 29 ms: 61
    [ 60.409000] 15 ms: 61
    [ 60.411000] 2 ms: 61
    [ 60.413000] 2 ms: 61
    [ 60.431000] 18 ms: 61
    [ 60.457000] 26 ms: 61
    [ 61.260000] 803 ms: 61
    [ 61.288000] 28 ms: 63
    [ 61.398000] 110 ms: 63
    [ 61.709000] 311 ms: 63
    [ 61.796000] 87 ms: 64
    [ 61.814000] 17 ms: 64
    [ 61.816000] 2 ms: 64
    [ 61.819000] 3 ms: 64
    [ 61.831000] 12 ms: 64
    [ 63.876000] 2045 ms: 64
    [ 63.960000] 83 ms: 69
    [ 64.079000] 119 ms: 69
    [ 64.256000] 177 ms: 69
    [ 64.284000] 28 ms: 70
    [ 64.336000] 52 ms: 70
    [ 64.339000] 3 ms: 70
    [ 64.341000] 2 ms: 70
    [ 64.349000] 7 ms: 70
    [ 64.368000] 19 ms: 70
    [ 64.399000] 30 ms: 70
    [ 64.402000] 3 ms: 70
    [ 64.516000] bcmfb: creating surface with pixel format 0x07e48888 (BPXL_eA8_R8
    _G8_B8)
    [ 65.175000] 773 ms: 70
    [ 65.291000] 116 ms: 72
    [ 65.327000] set current avs auto aspect to 4:3
    [ 65.328000] disable wss on display 0
    [ 65.329000] disable wss on display 1
    [ 65.332000] set sb to 3(2)
    [ 65.366000] set current avs auto aspect to 4:3
    [ 65.367000] disable wss on display 0
    [ 65.367000] disable wss on display 1
    [ 65.368000] set sb to 3(2)
    [ 65.373000] disable wss on display 0
    [ 65.373000] set wss 8 on display 1
    [ 65.408000] set input to 0
    [ 65.408000] set fb to 2(0)
    [ 65.409000] set current avs auto aspect to 4:3
    [ 65.409000] disable wss on display 0
    [ 65.410000] set wss 8 on display 1
    [ 65.411000] set sb to 3(2)
    [ 65.415000] set ac3 to downmix
    [ 65.418000] set ac3plus to use_hdmi_caps
    [ 65.424000] 132 ms: 72
    [ 65.434000] 9 ms: 72
    [ 65.438000] 4 ms: 72
    [ 65.689000] 250 ms: 72
    [ 65.719000] 30 ms: 73
    [ 65.772000] 52 ms: 73
    [ 71.366000] set current avs auto aspect to 16:9
    [ 71.367000] disable wss on display 0
    [ 71.367000] set wss 7 on display 1
    [ 71.368000] set sb to 3(1)
    [ 71.406000] set current avs auto aspect to 16:9
    [ 71.407000] disable wss on display 0
    [ 71.407000] set wss 7 on display 1
    [ 71.408000] set sb to 3(1)
    [ 71.409000] disable wss on display 0
    [ 71.409000] set wss 7 on display 1
    [ 71.411000] set current avs auto aspect to 16:9
    [ 71.412000] disable wss on display 0
    [ 71.412000] set wss 7 on display 1
    [ 71.412000] set sb to 3(1)
    [ 71.417000] set current avs auto aspect to 16:9
    [ 71.417000] disable wss on display 0
    [ 71.418000] set wss 7 on display 1
    [ 71.418000] set sb to 3(1)
    [ 71.420000] set current avs auto aspect to 16:9
    [ 71.420000] disable wss on display 0
    [ 71.421000] set wss 7 on display 1
    [ 71.421000] set sb to 3(1)
    [ 71.422000] disable wss on display 0
    [ 71.423000] set wss 7 on display 1
    [ 71.424000] set current avs auto aspect to 16:9
    [ 71.425000] disable wss on display 0
    [ 71.425000] set wss 7 on display 1
    [ 71.426000] set sb to 3(1)
    [ 71.430000] set current avs auto aspect to 16:9
    [ 71.431000] disable wss on display 0
    [ 71.431000] set wss 7 on display 1
    [ 71.432000] set sb to 3(1)
    [ 71.433000] set current avs auto aspect to 16:9
    [ 71.434000] disable wss on display 0
    [ 71.434000] set wss 7 on display 1
    [ 71.434000] set sb to 3(1)
    [ 71.436000] disable wss on display 0
    [ 71.436000] set wss 7 on display 1
    [ 71.438000] set current avs auto aspect to 16:9
    [ 71.438000] disable wss on display 0
    [ 71.439000] set wss 7 on display 1
    [ 71.439000] set sb to 3(1)
    [ 71.443000] set current avs auto aspect to 16:9
    [ 71.444000] disable wss on display 0
    [ 71.444000] set wss 7 on display 1
    [ 71.445000] set sb to 3(1)
    [ 71.447000] set current avs auto aspect to 16:9
    [ 71.448000] disable wss on display 0
    [ 71.448000] set wss 7 on display 1
    [ 71.449000] set sb to 3(1)
    [ 71.450000] disable wss on display 0
    [ 71.451000] set wss 7 on display 1
    [ 71.452000] set current avs auto aspect to 16:9
    [ 71.453000] disable wss on display 0
    [ 71.453000] set wss 7 on display 1
    [ 71.454000] set sb to 3(1)
    [ 71.466000] using 50.00Hz as MonitorRefreshRate
    [ 71.566000] SET FORMAT: display[0], format=27
    [ 71.567000] HDMI mode
    [ 71.567000] use EDID to detect colorspace
    [ 71.568000] using colorspace: 1
    [ 71.648000] bcm_video_analog_port_setup (fmt=7)
    [ 71.766000] SET FORMAT: display[1], format=7
    [ 71.887000] set current avs auto aspect to 16:9
    [ 71.887000] disable wss on display 0
    [ 71.888000] set wss 7 on display 1
    [ 71.889000] set sb to 3(1)
    [ 71.894000] set current avs auto aspect to 16:9
    [ 71.894000] disable wss on display 0
    [ 71.895000] set wss 7 on display 1
    [ 71.896000] set sb to 3(1)
    [ 71.905000] set current avs auto aspect to 16:9
    [ 71.906000] disable wss on display 0
    [ 71.907000] set wss 7 on display 1
    [ 71.907000] set sb to 3(1)
    [ 71.909000] set current avs auto aspect to 16:9
    [ 71.910000] disable wss on display 0
    [ 71.910000] set wss 7 on display 1
    [ 71.911000] set sb to 3(1)
    [ 71.912000] disable wss on display 0
    [ 71.913000] set wss 7 on display 1
    [ 71.915000] set current avs auto aspect to 16:9
    [ 71.915000] disable wss on display 0
    [ 71.916000] set wss 7 on display 1
    [ 71.916000] set sb to 3(1)
    [ 76.325000] 10553 ms: 73
    [ 76.358000] 33 ms: 97
    [ 76.366000] 7 ms: 97
    [ 77.018000] 651 ms: 97
    [ 77.106000] 87 ms: 99
    [ 77.140000] set mute 0 (000) 1
    [ 77.142000] 36 ms: 99
    [ 77.150000] 7 ms: 99
    [ 88.147000] alps_bsbe2 is in normal mode now
    [ 88.398000] CEC send ok!
    [ 88.508000] CEC send ok!
    [ 88.568000] unknown fec code: 0
    [ 88.597000] start pcr0 on dmx 3 pid:a6 index 5
    [ 88.599000] start audio on dmx 3 pid:1a8
    [ 88.600000] audio xpt start
    [ 88.600000] sync is off so we enable it
    [ 88.601000] demux-index 3 pcr0pid a6
    [ 88.601000] using 5 as pcr0 pidchannel
    [ 88.602000] MPEG
    [ 88.603000] audio: streamtype set 0
    [ 88.603000] audio: streamtype_set: stop rave
    [ 88.604000] audio: streamtype_set: restart rave
    [ 88.605000] set mute 0 (111) 1
    [ 88.607000] audio: decoder start 2
    [ 88.610000] video delay 0 (0 ms)
    [ 88.610000] total video delay: 0 (0 ms)
    [ 88.612000] start video0 on dmx 3 pid:a6
    [ 88.613000] total video delay: 0 (0 ms)
    [ 88.617000] VIDEO0: start decode
    [ 89.212000] RAP first pts 0xf1cb78a, stc 0x10e48c986, pcr valid
    [ 89.213000] audio_cdb_itb_error_isr! underflow
    [ 89.216000] audio_cdb_itb_error_isr! underflow
    [ 89.220000] audio_cdb_itb_error_isr! underflow
    [ 89.224000] audio_cdb_itb_error_isr! underflow
    [ 89.229000] audio_cdb_itb_error_isr! underflow
    [ 89.233000] audio_cdb_itb_error_isr! underflow
    [ 89.237000] audio_cdb_itb_error_isr! underflow
    [ 89.241000] audio_cdb_itb_error_isr! underflow
    [ 89.245000] audio_cdb_itb_error_isr! underflow
    [ 89.249000] audio_cdb_itb_error_isr! underflow
    [ 89.464000] ch0: lock
    [ 90.226000] VIDEO0: first pts 0x10e4ac5e0
    [ 90.227000] VIDEO0: resolution changed (720 576)
    [ 90.378000] enable tsm0
    [ 90.456000] unknown fec code: 0
    [ 90.646000] VIDEO0: progressive changed (0)
    [ 339.223000] HDMI: force disconnect!
    [ 339.223000] HDMI: now disconnected
    [ 339.223000] HDMI: stop CEC
    [ 339.224000] HDMI: now powered down
    [ 339.253000] HDMI: EDID read ok
    [ 339.254000] HDMI: start CEC
    [ 339.316000] HDMI: use logical CEC address 3
    [ 339.453000] CEC send ok!
    [ 345.099000] HDMI: force disconnect!
    [ 345.099000] HDMI: now disconnected
    [ 345.099000] HDMI: stop CEC
    [ 345.100000] HDMI: now connected
    [ 345.129000] HDMI: EDID read ok
    [ 345.145000] using 50.00Hz as MonitorRefreshRate
    [ 345.245000] SET FORMAT: display[0], format=27
    [ 345.246000] HDMI mode
    [ 345.246000] use EDID to detect colorspace
    [ 345.247000] using colorspace: 1
    [ 345.361000] bcm_video_analog_port_setup (fmt=7)
    [ 345.465000] SET FORMAT: display[1], format=7
    [ 345.585000] set current avs auto aspect to 16:9
    [ 345.586000] disable wss on display 0
    [ 345.586000] set wss 7 on display 1
    [ 345.587000] HDMI: start CEC
    [ 345.588000] set sb to 3(1)
    [ 345.649000] HDMI: use logical CEC address 3
    [ 345.787000] CEC send ok!
    [ 391.034000] JFFS2 notice: (210) check_node_data: wrong data CRC in data node
    at 0x03970da8: read 0xe7bc30bc, calculated 0x84037c48.
    [ 391.990000] JFFS2 notice: (210) check_node_data: wrong data CRC in data node
    at 0x03909a64: read 0x984ea8c8, calculated 0x786ea919.

    Guardando nel pannello del dvb-t vedo sempre no device found

  6. #56
    Elite Vip
    Join Date
    Feb 2011
    Posts
    319
    Post Thanks / Like
    Rep Power
    9

    Default Re: Avermedia 1835

    Code:
    lsmod
    e
    Code:
    cat /proc/bus/usb/devices
    Prova a riavviare Enigma dopo modprobe (solo Enigma)

  7. #57
    Newbie
    Join Date
    Nov 2013
    Posts
    10
    Post Thanks / Like
    Rep Power
    0

    Default Re: Avermedia 1835

    Quote Originally Posted by lamero View Post
    Code:
    lsmod
    e
    Code:
    cat /proc/bus/usb/devices
    Prova a riavviare Enigma dopo modprobe (solo Enigma)
    Allora reso comando modprobe, riavviato enigma poi ho dato i comandi e questo č l'output:
    root@dm800se:~# modprobe2 -f dvb-usb-it913x
    root@dm800se:~# lsmod
    Module Size Used by Tainted: P
    autofs4 25216 1
    dreambox_keyboard 3296 0
    dreambox_rc2 5216 1 dreambox_keyboard
    bcm7405 3935135 30
    alps_bsbe2 42691 1 bcm7405
    snd_pcm 64276 1 bcm7405
    snd_timer 19010 1 snd_pcm
    snd_page_alloc 5453 1 snd_pcm
    tmp100 910 1 bcm7405
    tu1216 40190 1 bcm7405
    cu1216mk3 7610 1 bcm7405
    alps_bsbe1_c01a 17000 1 bcm7405
    bcm4506 91490 1 bcm7405
    helper 540 1 bcm7405
    cxd1981 13910 1 bcm7405
    alps_bsbe1 5219 1 bcm7405
    r8712u 171528 0
    lnb_ctrl 5149 4 alps_bsbe2,alps_bsbe1_c01a,b
    stv0299 9368 1 alps_bsbe1
    lcd 43577 1
    stb_core 16706 11 dreambox_keyboard,dreambox_r
    2,tmp100,cu1216mk3,alps_bsbe1_c01a,bcm4506,cxd1981 ,lnb_ctrl,
    root@dm800se:~# cat /proc/bus/usb/devices

    T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 M
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=1d6b ProdID=0001 Rev= 3.02
    S: Manufacturer=Linux 3.2-dm800se ohci_hcd
    S: Product=Broadcom STB OHCI
    S: SerialNumber=ohci_hcd
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Drive
    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

    T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 M
    B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=1d6b ProdID=0001 Rev= 3.02
    S: Manufacturer=Linux 3.2-dm800se ohci_hcd
    S: Product=Broadcom STB OHCI
    S: SerialNumber=ohci_hcd
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Drive
    E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

    T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 M
    B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=1d6b ProdID=0002 Rev= 3.02
    S: Manufacturer=Linux 3.2-dm800se ehci_hcd
    S: Product=Broadcom STB EHCI
    S: SerialNumber=ehci_hcd
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Drive
    E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

    T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 M
    D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=0bda ProdID=8172 Rev= 2.00
    S: Manufacturer=Manufacturer Realtek
    S: Product=RTL8191S WLAN Adapter
    S: SerialNumber=00e04c000001
    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
    I:* If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=ff Prot=ff Drive
    E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E: Ad=0d(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

    T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 M
    B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
    D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=1d6b ProdID=0002 Rev= 3.02
    S: Manufacturer=Linux 3.2-dm800se ehci_hcd
    S: Product=Broadcom STB EHCI
    S: SerialNumber=ehci_hcd
    C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
    I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Drive
    E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

    T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 M
    D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=07ca ProdID=3835 Rev= 2.00
    S: Manufacturer=AVerMedia TECHNOLOGIES, Inc.
    S: Product=A835B
    S: SerialNumber=306992200333
    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
    I:* If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Drive
    E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

    T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=480 M
    D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
    P: Vendor=0951 ProdID=1625 Rev=13.c6
    S: Manufacturer=Kingston
    S: Product=DT 101 II
    S: SerialNumber=001372982F25A9B1264002C5
    C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
    I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Drive
    E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
    root@dm800se:~#

    il tuner non č presenti nel pannello del dvb

  8. #58
    Elite Vip
    Join Date
    Feb 2011
    Posts
    319
    Post Thanks / Like
    Rep Power
    9

    Default Re: Avermedia 1835

    Mi spiace allora

  9. #59
    Newbie
    Join Date
    Nov 2013
    Posts
    10
    Post Thanks / Like
    Rep Power
    0

    Default Re: Avermedia 1835

    Ok grazie per il supporto, farņ il reso ad amazon.

    Grazie ancora

  10. #60
    Newbie
    Join Date
    Jan 2015
    Posts
    2
    Post Thanks / Like
    Rep Power
    0

    Default Re: driver dtt su dm800se per R005 previsioni ???

    io ho dm500hd v2 e penna hauppauge wintv ministick 2.
    non riesco ad installarla.
    potete dirmi come fare?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •