Flashare Dreambox ONE UHD/Flash Dreambox ONE UHD/Flashen einer Dreambox ONE UHD

    • Official Post

    Istruzione manuale per Flashare Immagine Dream-Elite sul Dreambox ONE UHD
    Anleitung Image flashen für Dreambox ONE UHD
    HowTo flash Image for Dreambox ONE UHD


    1.png


    -Accendere il Dreambox ONE UHD dall'interruttore posto sul retro,appena il led sopra il pulsante on/off si accende tenere premuto con un dito di sopra e liberare subito dopo che vi comparira' indirizzo ip sullo schermo della TV


    -Turn on the Dreambox ONE UHD from the switch on the back, as soon as the LED above the on / off button lights up hold down with a finger upwards and release immediately after that the IP address will appear on the TV screen


    -Schalten Sie die Dreambox ONE UHD über den Schalter auf der Rückseite ein, sobald die LED über der Ein- / Aus-Taste aufleuchtet, halten Sie mit dem Finger nach oben gedrückt und lassen Sie die IP-Adresse sofort los. Die IP-Adresse wird auf dem Fernsehbildschirm angezeigt


    2.png


    -Via browser web è necessario immettere - > "http://dreamone" (senza "") o l’indirizzo IP del Dreambox ONE UHD


    -Enter following via browser - > "http: // dreamone" (without "" ) or the IP-adress of Dreambox ONE UHD


    -Über Browser -> "http://dreamone" (ohne "") oder IP-Adresse der Dreambox ONE UHDeingeben


    -Cliccare su caricamento del firmware "Firmware Upload"


    -Click "Firmware upload"


    -"Firmware upload" klicken


    3.jpg


    -Selezionare l' Immagine giusta per il Dreambox ONE UHD cliccando su "Sfoglia" e successivamente "Go"


    -Now click "Select File" and then choose the right image for the Dreambox ONE UHD and after that click "Select" and then "Go"


    -Nun auf "Datei auswählen" klicken und das richtige Image für die Dreambox ONE UHD auswählen und anschließend "Auswählen" klicken und dann auf „Go“


    4.jpg


    -Importante:Levare i segni di spunta da Backup e Restore Settings


    -Important: Remove checkmarks from Backup and Restore Settings


    -Wichtig: Entfernen Sie die Häkchen von Backup und Restore Settings


    5.jpg


    -Inizia il processo di installazione dell'immagine sul Dreambox ONE UHD


    -The image setup process starts on the Dreambox ONE UHD


    -Der Installationsprozess beginnt auf dem Dreambox ONE UHD


    6.jpg


    -Aspettate la fine del caricamento e successivamente cliccate su "Click here to reboot" e aspettate che il Dreambox ONE UHD faccia il reboot


    -After flashing click on "Click here to reboot" and wait until Dreambox ONE UHD is rebooting


    -Nach dem flashen auf "Click here to reboot" klicken und warten bis Dreambox ONE UHD neu hochfährt


    7.jpg


    Il Dreambox ONE UHD e' stato flashato con successo!
    Flashing was successful!
    Flashvorgang war erfolgreich!


    8.jpg






    N.B: E' anche possibile mettere in RESCUE MODE e quindi flashare il Dreambox ONE UHD da Telnet inviando prima uno e poi l'altro i seguenti comandi:


    N.B: It is also possible to put in RESCUE MODE and then flash the Dreambox ONE UHD also from Telnet by sending first one and then the other the following commands:


    NB: Es ist auch möglich, den RESCUE-MODUS zu aktivieren und dann die Dreambox ONE UHD auch über Telnet zu flashen, indem zuerst einer und dann der andere der folgenden Befehle gesendet wird


    Quote

    echo "rescue" >> /proc/stb/fp/boot_mode
    shutdown -r now