VPN anonima grazie a TOR

    PREPARAZIONE
    Caricare i files:

    • tor_0.2.4.23_mips32el.ipk
    • onioncat_r567_mips32el.ipk
    • torrc (contenuto nell'archivio torrc.zip)


    nella cartella /tmp


    INSTALLAZIONE

    Code
    cd /tmp
opkg install tor_0.2.4.23_mips32el.ipk
opkg install onioncat_r567_mips32el.ipk
mv torrc /etc/tor/


    PRIMO AVVIO

    Code
    /etc/init.d/tor start
/etc/init.d/onioncat start


    CONOSCERE IP DI VPN

    Code
    ifconfig


    TESTATO SU
    dm800se OE2.0


    DIPENDENZE
    kernel-module-tun_3.2-r14.17.49_dm800se.ipk
    libcrypto1.0.0_1.0.1h-r0_mips32el.ipk
    libevent_2.0.21-r1_mips32el.ipk
    libssl1.0.0_1.0.1h-r0_mips32el.ipk


    LINKS
    https://www.onioncat.org
    https://www.torproject.org

    root@dm800se:~# opkg install /var/tmp/imgmod.opk; echo ">>> DONE <<<";
    Installing libcrypto1.0.0 (1.0.1h-r0) to flash...
    libcrypto1.0.0: unsatisfied recommendation for openssl-conf
    Collected errors:
    * satisfy_dependencies_for: Cannot satisfy the following dependencies for libc
    ypto1.0.0:
    * libc6 (>= 2.19) *
    * opkg_install_cmd: Cannot install package libcrypto1.0.0.


    cosa vuol dire?

    Installalo da pannello Addons ti dovrebbe scaricare tutto, anche le dipendenze mancanti.

    DM500hd DM800pvr DM800se DM8000



    Non viene rilevata una dipendenza (libcrypto1.0.0). Puoi prelevarla dal primo post

    root@dm800se:~# /etc/init.d/tor start
    * starting tor daemon: tor... /usr/sbin/tor is already running
    1564
    root@dm800se:~# /etc/init.d/onioncat start
    done.
    root@dm800se:~# ocat_ip
    -sh: ocat_ip: not found
    root@dm800se:~# ocat_ip
    -sh: ocat_ip: not found
    root@dm800se:~#


    inoltre non trovo questo file: ocat_ip
    un aiuto? grazie.

    Grazie per la risposta,
    ho usato i comandi del primo post facendo il copia ed incolla

    In effetti il file ocat_ip non è stato caricato e manca (ho aggiornato la guida). Per conoscere l'IP di VPN digita:

    Code
    ifconfig

    root@dm800se:~# ifconfig
    eth0 Link encap:Ethernet HWaddr 00:09:34:2B:0C:E3
    inet addr:192.168.1.77 Bcast:192.168.1.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:986 errors:0 dropped:0 overruns:0 frame:0
    TX packets:685 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:880668 (860.0 KiB) TX bytes:193858 (189.3 KiB)
    Interrupt:16

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    root@dm800se:~#

    Funziona? Quale é il mio indirizzo ip esterno?

    Edited once, last by marcorenzi ().

    root@dm800se:~# /etc/init.d/tor start
    * starting tor daemon: tor... /usr/sbin/tor is already running
    599
    root@dm800se:~# /etc/init.d/onioncat start
    done.
    root@dm800se:~# ocat -4 -r /var/lib/tor/onioncat/hostname
    root@dm800se:~#

    Va in background. Aggiungi l'opzione -f (mi pare sia questa l'opzione per non mandarlo in background. Quindi:

    Code
    ocat -f -4 -r /var/lib/tor/onioncat/hostname

    root@dm800se:~# ocat -f -4 -r /var/lib/tor/onioncat/hostname
    root@dm800se:~#


    root@dm800se:~# ifconfig
    eth0 Link encap:Ethernet HWaddr 00:09:34:2B:0C:E3
    inet addr:192.168.1.77 Bcast:192.168.1.255 Mask:255.255.
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:6699 errors:0 dropped:1 overruns:0 frame:0
    TX packets:3047 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:1999975 (1.9 MiB) TX bytes:531053 (518.6 KiB)
    Interrupt:16

    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:0 errors:0 dropped:0 overruns:0 frame:0
    TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    root@dm800se:~# ocat -B -4 -r /var/lib/tor/onioncat/hostname
    Tue, 04 Nov 2014 16:10:46.618 +0100 [0:main : err] parameter seems not t
    be valid onion hostname
    root@dm800se:~#