Con il telecomando Dreambox si ha la possibilità di controllare il Dreambox e il dispositivo TV vediamo come
With the Dreambox remote control you have the possibility to control the dreambox and your tv device we see how.
Ci sono 3 opzioni per la programmazione del telecomando:
There are 3 options for programming the rcu:
1. La programmazione con il codice
1. Programming with Code
3. Programmazione per funzione Scan
3. Programming by Scan function
2. Programmazione per funzione Learning
2. Programming by Learning function
Programmazione con codice (Programming with Code)
-Premere contemporaneamente il tasto TV e il tasto OK per 3-4 secondi
-Press the OK botton and the TV-Mode_Button for 3 seconds
-Inserire il codice a 3 cifre per il vostro modello di tv,premere un tasto volume oppure mute e verificarne il funzionamento,se non dovesse funzionare il primo codice proseguire con gli altri della lista fino a trovare quello giusto
-Enter the 3 digit code for your TV model, press a volume button or mute and test it, if it does not work the first code to continue with the others on the list until you find the right one
Programmazione per funzione Scan (Programming by Scan function)
-Premere contemporaneamente il tasto OK e il tasto TV per 3 secondi
-Press the OK button and the TV -Mode-Button for 3 seconds
-Per avviare la modalità di scansione puntare il telecomando(con ir-sensore) nella direzione del dispositivo TV e inserire il codice 777
-To start the scan mode to aim the remote control(with ir-sensor) in the direction of the TV device, and enter the code 777
-Non appena il dispositivo TV si spegne premere immediatamente OK per memorizzare il codice
-As soon as the TV switches off the device immediately, press OK to store the code
Programming by Learning function
-Con questo metodo di programmazione potete programmare i tasti del telecomando uno ad uno
-With this programming method you can program the remote control one by one
-Premere contemporaneamete il tasto OK e il tasto TV per 3 secondi
-Press the OK button and the TV -Mode-Button for 3 seconds
-Digitare il codice 888
-Enter the code 888
-Avvicinare i due telecomandi ad una distanza di 3-4 cm con gli infrarossi che si guardano frontalmente
-Place the dreambox rcu and the tv-device rcu towards each other at a distance of 3-4 cm
-Premere il primo dei tasti che si vuole programmare sul telecomando Dreambox ad esempio mute
-Press the first key to be programmed on the remote control Dreambox for example mute
-Premere lo stesso tasto(mute)sul telecomando TV per 2-3 secondi
-Press the same button (mute) on the TV remote control for 2-3 seconds
-Avrete cosi programmato il primo tasto desiderato(mute)continuare la stessa procedura per il resto dei tasti che si vuole programmare
-So you will have programmed the first key you want to(mute) continue the same procedure for the rest of the keys you want to program
In allegato i codici TV
Attached codes for TV